Schaub 211055 Avenue Cabinet Pull with 8" Center to Center and Standard Mounting

Yes, if your holes are 8 inches apart on center. The Avenue 211055 is drilled at 8 inch center-to-center, so it drops onto an existing pair of 8 inch bores with no new drilling. Overall length is 9-5/8 inches, which gives you about three quarters of an inch of post outside each screw hole, so plan your drawer face width accordingly.

The Avenue 211055 uses 8/32 machine screws, supplied at 1 inch long. That length suits a standard 3/4 inch drawer front or door. If you're mounting through a thicker slab, a five-piece panel, or an applied face, you'll need longer 8/32 screws, since the thread is the standard cabinet hardware size.

The Schaub 211055 Avenue pull is a traditional style pull. If the design calls for modern, the Omnia 1969, 1970 and 1971 are modern cabinet pulls in forged solid brass, with 1-3/16 inch projection on the 1969 and 1971 and 1-1/4 inch on the 1970 - all shallower than the 1-3/8 inch projection of the 211055. Deltana's SBP35 modern square bar pull in solid brass is another option if you want a squared bar profile.

The Schaub 211055 Avenue is built on 8 inch center to center with a 9-5/8 inch overall length, so it needs a wide drawer face. For narrower fronts, the Omnia 1968/102 is a forged solid brass cabinet pull at 4 inch center to center, the Trimco 553 series drawer pull is 3 inch center to center, and the Trimco 562 series offers 3-1/2 inch, 4 inch and 96mm center to center. Deltana's SBP35 is a 3-1/2 inch square bar pull.

Projection is 1-3/8 inches from the face of the door or drawer. That's enough hand clearance for a gloved grip and matters most on an inset run or next to a wall return, where a deep pull can foul an adjacent door swing. Measure the gap to any perpendicular surface before you commit.

Five finishes: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. Unlacquered Brass is the one to specify if you want the pull to darken and patina with handling rather than hold its original color; the other four are finished to stay as delivered.

Not as a direct swap. The Schaub 211055 Avenue is a two-post pull on 8 inch center to center with 8/32 x 1 inch screws, so the cabinet face is already drilled for two holes at that spacing. Knobs such as the Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs at 1-1/4 inch diameter, or the CK-17025 Blackcomb square knob at 25mm, are single-hole parts and would leave the second hole exposed. Use knobs on new fronts or where you are refacing.

The Schaub 211055 is from the Avenue collection. Within the Schaub Collection offered under the Emtek label, the Alexander cabinet pull, the Art Deco cabinet pull and the Bar cabinet pull are separate series you can specify for a different profile while staying in the same family of cabinet hardware.

Solid brass is the base material, which is why it's offered in live finishes like Unlacquered Brass. Brass takes plating and patina finishes cleanly and won't rust in a kitchen or bath, unlike a plated steel pull.

The Avenue 211055 is a pull only, so knobs come from elsewhere in the program. Emtek's Schaub Collection carries cabinet knob and pull options, including the SELECT 8405, Alexander, Art Deco, and Bar series, all built on the same Schaub design line. For a plain round knob in a different family, the Orca Bachelor collection runs 1-1/4 inch diameter.