Schaub 211052 Avenue Cabinet Pull with 4" Center to Center and Standard Mounting

The Avenue 211052 uses 8/32 x 1 inch machine screws, which is the standard cabinet hardware thread. A 1 inch screw handles typical 3/4 inch cabinet doors and drawer fronts. If you are mounting through a thicker front, a false front, or a front with an applied panel, you will need longer 8/32 screws.

The Omnia 1968/102 is the nearest match on hole spacing: it is a forged solid brass cabinet pull with 4 inch center-to-center spacing, the same drilling as the Schaub 211052 Avenue pull, and the same brass base material. The difference is styling - the Schaub 211052 is a traditional-style pull, while the Omnia 1968/102 is a modern-style pull. If the existing drawer fronts are already bored on 4 inch centers, either drops into the same two holes; the choice is appearance, not layout.

The Schaub 211052 Avenue pull is fixed at 4 inch center to center, so it will not land in 3-1/2 inch holes. The Trimco 562 series drawer pulls are offered in 3-1/2 inch, 4 inch, and 96mm center-to-center options, which covers that spacing directly. The Deltana SBP35 modern square bar pull is another 3-1/2 inch option in solid brass. Choosing the Trimco 562 also lets a property manager run one series across drawers bored at both 3-1/2 inch and 4 inch without redrilling either.

No. The Schaub 211052 Avenue is a cabinet pull mounted through two holes on 4 inch centers. The Orca Hardware CK-15030 and CK-16030 Bachelor pieces and the CK-17025 Blackcomb piece are cabinet knobs - the Bachelor pair at 1-1/4 inch diameter and the Blackcomb at 25mm - and a knob mounts on a single screw. Swapping one of these in leaves an unused hole in the drawer front unless the door is redrilled or filled, so they are a design change rather than a drop-in replacement.

The Schaub 211052 Avenue pull projects 1-3/8 inch off the face of the drawer. Where that reach into a walkway is a problem, the Omnia 1969 and Omnia 1971 forged solid brass pulls both carry a 1-3/16 inch projection, and the Omnia 1970 carries a 1-1/4 inch projection. All three are solid brass like the Avenue, so the material and feel stay consistent while the pull sits closer to the door face.

Projection is 1-3/8 inches from the face of the door to the back of the grip. That is enough clearance to get a gloved hand behind it, and it is worth checking against anything the door swings toward, an adjacent appliance handle, a return wall, or a corner cabinet where two doors meet. The pull body itself measures 5/8 inch.

Five finishes: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. Unlacquered Brass is the one to think hardest about on a multi-unit or rental job, since raw brass patinas with handling rather than staying uniform. Matte Black, Polished Nickel, Satin Brass, and Vintage Brass all hold their appearance, which is what you want when you are matching pulls across a run of cabinets over several years.

Brass is the base material on the Avenue 211052, not cast zinc. That matters on kitchens and baths where the hardware gets handled constantly and where humidity works on cheaper pot metal, and it is why the unlacquered version can be left to develop a patina instead of flaking a coating.

Avenue is Schaub's traditional-styled collection, so it suits raised panel, shaker, and inset cabinetry rather than flat slab modern fronts. If the job is contemporary, the Omnia 1968/102 is a modern forged solid brass pull also on 4 inch centers, and the Deltana SBP35 is a square bar pull in solid brass. For a bar-style look, Emtek's Bar Cabinet Pull is another option.

The Avenue 211052 is only made at 4 inch centers, so upper doors and narrow drawers that need a shorter pull have to come from elsewhere in the Schaub line or another series. Trimco's 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm centers, which lets you run one series across mixed drawer widths, and the Trimco 553 Series is a 3 inch center-to-center drawer pull. Deltana's SBP35 is 3-1/2 inch. Mixing brands means finishes will not match exactly, so keep a single series on any run of cabinets that read together.

The Schaub 211052 Avenue is a traditional-style brass pull with a 1-3/8 inch projection and a 5-5/8 inch overall length. For a plainer run, the Orca Hardware CK-12001 T-pull bar is a steel pull in satin nickel with a 2 inch bar width, and the Trimco 553 series drawer pull is a 3 inch center-to-center pull. Both trade the Avenue's traditional brass detailing for a stripped-down bar profile, which is often what a maintenance or shop cabinet needs.

Emtek sells a Schaub Collection line that includes the 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull, and the Bar cabinet pull - all catalogued as cabinet knob/pull. They are the closest family members to the Schaub 211052 Avenue pull if you want a different profile while staying in the same design line. Note that the Emtek pieces are catalogued as knob/pull, so confirm the boring pattern of the specific piece before ordering against drawer fronts already drilled for the Avenue's 4 inch centers.

The Schaub 211052 Avenue pull is brass and comes in Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass, which covers both the living-finish unlacquered look and the warmer vintage brass tone. The Omnia 1968/102, 1969, 1970, and 1971 pulls are forged solid brass, and the Deltana SBP35 is a heavy-duty solid brass bar pull. All are brass-bodied, so the decision comes down to which finish and profile you need rather than a change in base material.

Yes. It is a cabinet pull with a 4 inch hole spacing and 5-5/8 inch overall length, which works on doors and on drawer fronts wide enough to carry it. On a narrow drawer, measure the front first, you need room for the 5-5/8 inch body plus margin on each end, and the two holes have to sit 4 inches apart and centered.

Not the same part. Emtek sells cabinet pulls under a Schaub Collection banner, including the Emtek 8405 Select, the Alexander, and the Art Deco pulls, but those are their own series with their own designs and finish names. If you need to match pulls already installed from the Schaub Avenue collection, order the Avenue part, not an Emtek equivalent.