Schaub 211061 4" Fused Glass Rectangular Cabinet Pull with 6” x 1” Overall

Yes. The Schaub 211061 is drilled on 4 inch centers, so it lands on the standard 4 inch bore spacing already in most door and drawer fronts. Overall length is 6 inches, so there is an inch of pull body past each hole, which matters if you are replacing something shorter and worried about reveals or adjacent hinges.

It uses #8-32 screws, and the ones specified are wood screws rather than machine screws through a bored front. #8-32 is the standard cabinet pull thread, so if you are swapping out older pulls the existing hardware size matches; what changes with front thickness is the screw length you need, not the thread.

The 211061 is glass and stainless steel, from Schaub's Fused Glass collection in the Symphony Elegance style. It is a decorative pull aimed at finished residential and hospitality millwork. For heavy rental turnover or commercial MRO where pulls get abused, a solid metal bar pull is the safer fleet standard, such as the Deltana SBP35 square bar pull in solid brass or the Trimco 562 Series drawer pull, which is offered in a 4 inch center-to-center option that matches this bore spacing.

The Schaub 211061 is a glass and stainless steel pull with 4 inch center-to-center spacing. If a solid metal pull is wanted at the same spacing, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing. The Trimco 562 series drawer pulls also include a 4 inch center-to-center option. Both are metal-bodied rather than fused glass.

The Schaub 211061 projects 1-1/8 inch from the face of the door. Among comparable modern pulls, the Omnia 1969 and Omnia 1971 are listed at 1-3/16 inch projection and the Omnia 1970 at 1-1/4 inch, so all three stand off slightly further than the 211061. If clearance is the deciding factor, the 211061's 1-1/8 inch projection is the shallowest of that group.

The Schaub 211061 measures 6 inch overall on 4 inch centers, which needs a drawer front wide enough to carry it. For narrower fronts, the Trimco 553 series drawer pulls are 3 inch center-to-center and the Deltana SBP35 square bar pull is 3-1/2 inch. The Trimco 562 series also offers a 3-1/2 inch center-to-center option. All three are metal pulls rather than fused glass.

Projection is 1-1/8 inches from the face, with a 1/2 inch base dimension where it meets the cabinet. That 1-1/8 inch gives full hand clearance, and it is the number to check against door swing in a tight inside corner or against an adjacent appliance panel.

Two combinations: Translucent White with Brushed Stainless Steel (TW-BSS) and Translucent White with Gold (TW-GLD). The glass bar is the translucent white element in both; the difference is the metal posts and mounting hardware.

Yes. The Schaub 211061 is a two-screw pull on 4 inch centers, and knobs mount on a single screw, so pairing them is a design choice rather than a drilling conflict. Comparable single-screw knobs include the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor Collection round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25mm diameter.

The Schaub 211061 is a Symphony Elegance style pull from the Fused Glass collection, combining translucent glass with a stainless steel or gold mount. For a plainer profile, the Emtek Bar cabinet pull is a straight bar design, the Deltana SBP35 is a modern square bar pull in solid brass, and the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. The Emtek Art Deco and Emtek Alexander pulls are more decorative alternatives.

Plan on using the hardware specified for the 211061. The Schaub 211061 calls for a #8-32 wood screw, so if the existing fasteners are a different thread or length for the door thickness they should not be reused. The Omnia 1968/102 is a forged solid brass pull on the same 4 inch centers, so the existing bore spacing will line up even though the fasteners may not carry over.

The 211061 sits in Schaub's Fused Glass collection, Symphony Elegance style, and the Symphony catalog is the place to match knobs and other lengths within the same collection. If you want a coordinating knob in a plain metal finish instead, the Orca Bachelor Collection round knob at 1-1/4 inch diameter and the Blackcomb square knob at 25mm are simple options.

Yes, Schaub publishes a Proposition 65 warning covering this product through its product stewardship page. If you are specifying for a California project and need the disclosure in your submittal package, pull it from Schaub's stewardship documentation.