Schaub 211081 Noho Square Cabi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$64.00
$42.12
Schaub 211081 Noho Square Cabinet Pull with 6" Center to Center and Standard Mounting

Schaub 211081 Noho Square Cabinet Pull with 6" Center to Center, Brass Construction

(No reviews yet) Write a Review

Model: 211081-MB
From the NOHO Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$64.00
$42.12
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 211081 Noho Square Cabinet Pull with 6" Center to Center, Brass Construction

The Schaub 211081 Noho Square Cabinet Pull delivers contemporary style for kitchen and cabinetry projects, featuring a 6" center to center spacing and a 7-1/2" overall length. Finished in matte black with a brass base material, this pull offers a 1-1/4 projection for comfortable grip and installs with standard mounting using an 8/32 x 1 thread / screw size. This cabinet pull is part of the Noho collection and reflects a contemporary style suitable for both kitchen and bath cabinetry.

Key Features

  • Center to Center Spacing: 6" center to center with a 7-1/2" overall length suits a range of cabinet and drawer applications.
  • Comfortable Projection: 1-1/4 projection provides easy clearance for a secure, natural grip.
  • Brass Construction: Brass base material supports durable, long term performance in everyday use.
  • Matte Black Finish: A contemporary matte black finish complements modern cabinetry and fixtures.
  • Noho Collection Design: The square silhouette from the Noho collection reflects a clean, contemporary style.
  • Standard Mounting: Mounts using an 8/32 x 1 thread / screw size for standard cabinet installation.
  • Versatile Application: Suited for both drawer and door hardware on kitchen and bathroom cabinetry projects.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 7-1/2"
  • Product Projection: 1-1/4"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 6"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Commercial Cabinetry Projects
  • Custom Millwork Installations
  • Office Storage Cabinets

Why Schaub Noho?

Schaub Noho cabinet pulls combine a brass base material with a contemporary matte black finish for dependable, everyday performance. The square silhouette and 6" center to center spacing make this pull a versatile choice for modern kitchens, baths, and custom cabinetry, delivering a clean, cohesive look across cabinet and drawer hardware throughout the home. Designed for both drawer and door applications, it provides a dependable update to any contemporary cabinetry scheme.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
NOHO
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
7-1/2"
Thread / Screw Size:
8/32 x 1
Product Function:
Cabinet Pull
Product Projection:
1-1/4"
Product Style:
Contemporary
Product Material:
Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
6"
Department:
Door Hardware

Schaub 211081-MB – Frequently Asked Questions

1) What screws come with the Schaub Noho cabinet pull and will they work on a thick drawer front?
The Noho 211081 uses 8/32 machine screws, supplied at 1 inch long. That length covers a standard 3/4 inch drawer face or door with thread to spare. If you are mounting through a thicker slab front, a drawer box with a false front, or adding a backplate, you will need longer 8-32 screws.
2) What is a comparable square-profile brass cabinet pull to the Schaub 211081 Noho if I need a shorter center-to-center?
The Schaub 211081 Noho is a contemporary square cabinet pull in brass with 6 inch center-to-center spacing and a 1-1/4 inch projection. For a shorter mounting spread in a similar modern square profile, the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch solid brass pull, and the Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing. Both use a squared modern bar form rather than the Noho detailing, so verify existing drill centers before swapping.
3) If a 6 inch pull is too long for narrow drawer fronts, what should I use instead of the Schaub 211081 Noho?
The Schaub 211081 Noho measures 7-1/2 inches overall on 6 inch centers, which needs a wide drawer front to look right. For narrow fronts, the Trimco 553 Series drawer pulls are set on 3 inch centers, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. A knob is the other route on very narrow fronts: the Orca Hardware Blackcomb CK-17025 is a 25mm square cabinet knob, single-screw, which keeps the squared look of the Noho at much smaller scale.
4) How far does the Schaub Noho pull stand off the cabinet face?
Projection is 1-1/4 inches. That is enough grip clearance for a gloved hand and keeps the bar clear of the face for full-overlay doors. Where the pull sits near an inside corner or beside an appliance, check that 1-1/4 inches plus the door swing will not collide.
5) What finishes does the Schaub 211081 Noho pull come in?
Five: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. Unlacquered Brass is the one to specify if you want the pull to darken and patina with use; the others hold their look. For a kitchen where every pull has to match, order the whole run in one finish at once.
6) Is the Schaub Noho pull solid brass or plated pot metal?
Brass is the base material, not zinc die cast. That matters for the Unlacquered Brass and Vintage Brass options in particular, since the finish is on brass underneath rather than a plated substrate, and it holds up better to repeated hand contact in a kitchen or a multi-family turn.
7) Is the Emtek Bar Cabinet Pull the same thing as the Schaub 211081 Noho?
No. Both sit in the Schaub design family - the Emtek Bar Cabinet Pull is part of Emtek's Schaub Collection - but the Bar pull is a round bar profile in Emtek's Bar series, while the 211081 belongs to Schaub's NOHO collection with a squared contemporary profile. Emtek also offers the Alexander and Art Deco cabinet pulls in the Schaub Collection, both catalogued as cabinet knob/pull, plus the Emtek 8405 Select cabinet pulls. If the design intent on the drawing is the Noho square, none of those substitute visually.
8) For a high-traffic commercial casework run, what steel alternative is there to the brass Schaub 211081 Noho pull?
The Schaub 211081 Noho is a brass pull offered in Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. If a facility standard calls for steel instead of brass, the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. The Deltana SBP35 is described as heavy-duty solid brass if you want to stay in brass but in a bar profile.
9) Can I mix the Schaub 211081 Noho pull with knobs on the same kitchen?
Yes, that is a common split - pulls on drawers and knobs on doors. The 211081 Noho is a two-hole pull on 6 inch centers using 8/32 x 1 screws. For single-hole knobs in the same job, the Orca Hardware Bachelor CK-15030 is a round cabinet knob at 1-1/4 inch diameter, the Bachelor CK-16030 is a round ring knob at 1-1/4 inch diameter, and the Blackcomb CK-17025 is a 25mm square knob. Match the finish family across both, since the Noho finish list and the Orca finishes are specified separately.
How fast can I get the Schaub 211081-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 211081-MB come with a warranty?
Absolutely. The Schaub 211081-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 211081-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 211081-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!