Schaub 211083 Noho Square Cabinet Pull with 10" Center to Center and Standard Mounting

It mounts with 8/32 machine screws, 1 inch long. That length suits standard 3/4 inch cabinet doors and drawer fronts. If you are mounting to a thicker slab door, a false front with a subfront, or adding a backplate, you will need longer 8/32 screws, which is the standard cabinet hardware thread.

The Omnia 1970 modern cabinet pull is forged solid brass and also carries a 1-1/4 inch projection, matching the 1-1/4 inch projection of the Schaub 211083 Noho square pull. The Schaub 211083 is brass with a 10 inch center-to-center and 11-1/2 inch overall length, so if you need that long appliance-style span you should confirm the Omnia 1970 is offered in a matching hole spacing before substituting. The Omnia 1969 and Omnia 1971 are the nearby series at 1-3/16 inch projection.

The Deltana SBP35 is a modern square bar pull in solid brass with a 3-1/2 inch size, which is the short square-profile option for drawer fronts alongside the Schaub 211083 Noho square pull at 10 inch center-to-center and 11-1/2 inch overall. Both are brass-bodied square pulls, so the visual family reads consistently; finishes are specified separately, and the 211083 is offered in Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass.

Projection is 1-1/4 inches, measured from the face of the door or drawer to the back of the grip. That gives full-hand clearance on a tall pantry or refrigerator panel, and it is the number to check if the pull sits near a wall return, an adjacent appliance, or an inside corner where a door swings past.

Five finishes: Matte Black, Polished Nickel, Unlacquered Brass, Satin Brass, and Vintage Brass. One thing to plan for on a kitchen: Unlacquered Brass has no protective coating, so it will patina with handling over time, while Satin Brass and Vintage Brass hold their look. If you are matching hardware already installed, pick from the coated finishes.

For short center-to-center runs, the Deltana SBP35 is a solid brass modern square bar pull at 3-1/2 inches. Omnia's 1970 modern cabinet pull is forged solid brass with the same 1-1/4 inch projection as the Noho, so it keeps the same standoff if you are mixing sizes across a kitchen. Emtek also lists the Schaub Collection pulls, including the Bar Cabinet Pull, if you want the Schaub design language under the Emtek line.

Knobs use a single hole and suit small doors and narrow drawers; a long pull like the Noho spans 10 inches between two holes and gives a two-hand grip, which is what you want on heavy drawers, pantry doors, and appliance panels. If parts of the run need knobs, Orca's Blackcomb 25mm square cabinet knob keeps a square profile, and the Bachelor Collection round knobs at 1-1/4 inch diameter are the softer alternative.

The Noho is a contemporary square-profile pull, so it reads correctly on flat slab and shaker-style fronts. Square edges, straight posts, no ornament. If the rest of the job is traditional or period, Emtek's Schaub Collection offers the Art Deco and Alexander pulls as the decorative alternatives.

The Schaub 211083 is the Noho collection pull in a contemporary square style. Within the same Schaub Collection sold under Emtek, the Alexander series and the Art Deco series are both cabinet knob/pull families with a more ornamented profile, and the Emtek 8405 belongs to the Emtek SELECT series. Those give you a decorative direction while the Noho stays the plain square section.