Schaub 211095 8" Center to Center Monza Cabinet Pull

It is tapped M4, which is metric. The usual US cabinet screw is 8-32, and that will not thread into an M4 post, so do not plan on reusing the screws out of your old pulls. Order M4 machine screws in a length that suits your drawer front thickness.

The Schaub 211095 Monza pull is an aluminum pull with a 1-1/4 inch projection. If the job calls for forged solid brass in a modern style, the Omnia 1970 is a modern cabinet pull in forged solid brass that also carries a 1-1/4 inch projection, so the standoff from the door face matches. Omnia's 1969 and 1971 modern pulls are also forged solid brass, each with a 1-3/16 inch projection if you want the bar to sit slightly closer to the face.

The Schaub 211095 Monza is an 8 inch center-to-center pull with a 9-5/8 inch overall length, which suits wide drawers and tall doors. For narrower drawers in the same run, the Trimco 553 Series drawer pull is 3 inch center-to-center, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Deltana SBP35 is a 3-1/2 inch modern square bar pull in solid brass, and the Omnia 1968/102 modern pull is 4 inch center-to-center in forged solid brass. Confirm your existing bore spacing before ordering, since none of these share the Monza's 8 inch hole pattern.

Projection is 1-1/4 inches, with a 5/8 inch base dimension. That is enough knuckle clearance for a gloved hand, and it is the number to watch if the drawer sits next to a wall return, an adjacent perpendicular cabinet run, or a door that swings past it.

Four: Magenta (MA), Matte Black (MB), Matte Green (MG), and Signature Satin Brass (SSB). Two of those are saturated color finishes rather than metals, so if you are matching an existing metal hardware package across a kitchen or a multi-family unit turn, Matte Black or Signature Satin Brass are the ones that will blend with standard cabinet and appliance hardware.

Yes, where a single fastener is acceptable. The Schaub 211095 Monza is a two-hole pull at 8 inch center-to-center, so it needs a matched bore pattern. If you would rather drill one hole on small doors, the Orca Hardware Bachelor Collection round cabinet knob and round ring knob are both 1-1/4 inch diameter, and the Orca Blackcomb Collection square cabinet knob is 25mm. These are knobs rather than pulls, so they give a grip point instead of a bar span.

The Monza is a contemporary-style pull from Schaub's Monza collection. If you want the same modern language in other shapes, Emtek sells the Schaub collection under its SELECT line including a Bar cabinet pull, Deltana's SBP35 is a modern square bar pull at 3-1/2 inches in solid brass, and Orca's Blackcomb square knob at 25mm covers the knob side of the same design vocabulary.

It is part of Schaub's Monza collection, so the design matches the rest of the Monza family. Where you want a different profile but the same finish family, Emtek's Schaub Collection pulls (Alexander, Art Deco, Bar, and the SELECT 8405 knobs and pulls) are built off the same Schaub designs and are a common way to pair a knob with this pull on the same run.

The Schaub 211095 Monza is a contemporary style pull. For a more decorative treatment, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both cabinet knob/pull offerings in Emtek's Schaub Collection, each in its own series. For a stripped-down modern bar instead, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel.