Schaub 212 5" Center to Center Northport Round Cabinet Pull

It uses 8/32 thread screws, supplied at 1 inch length. One inch handles a standard 3/4 inch drawer front or door with room for the post. If you are mounting through a thicker front, a false front, or a front plus applied panel, you will need longer 8/32 machine screws.

The Schaub 212 Northport uses a zinc base material. If a specification calls for solid brass, the Omnia 1971 modern cabinet pull is forged solid brass and carries the same 1-3/16 inch projection as the Northport, so it stands off the door face the same distance. The Omnia 1969 is also forged solid brass at 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. Confirm the center to center spacing you need on the Omnia series before ordering.

The Schaub 212 Northport is drilled at 5 inch center to center, so it will not drop onto existing 3 inch or 4 inch bores without redrilling. For a 3 inch spacing the Trimco 553 series drawer pull is made at 3 inch ctc, and the Trimco 562 series covers 3-1/2 inch, 4 inch, and 96mm centers. The Omnia 1968/102 is a forged solid brass modern pull at 4 inch center to center. Match the existing bore spacing first, then pick the finish.

Projection is 1-3/16 inch, which is enough hand clearance for a full grip on a drawer or door without the pull catching in a tight galley or beside an appliance panel. The round base measures 1-1/4 inch.

Eight: Satin Nickel, Brushed Nickel, Polished Nickel, Polished Chrome, Matte Black, Ancient Bronze, Brushed Bronze, and Signature Satin Brass. That spread lets you match warm brass or bronze cabinetry as easily as a chrome or black kitchen package.

The 212 is the 5 inch center version of the Northport round pull. For smaller drawer fronts where 5 inch centers look oversized, the Trimco 553 Series drawer pull is 3 inch center-to-center and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm centers, or the Omnia 1968/102 at 4 inch centers.

The 212 is a two-post pull only, not a single-hole knob. For single-bore locations like narrow doors or small drawers, the Orca Hardware Bachelor Collection round knob (CK-15030) and round ring knob (CK-16030) are both 1-1/4 inch diameter, which matches the 1-1/4 inch base dimension of the Northport 212 visually. Finishes will not be identical across brands, so pull a sample before you commit a whole unit.

The Schaub 212 Northport is a transitional round pull with a 1-1/4 inch base dimension. For a squared profile, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in solid brass, and the Orca Hardware CK-17025 Blackcomb is a square cabinet knob at 25mm. Note the Orca CK-17025 is a knob with a single screw rather than a two-bore pull, so it does not reuse the Northport drilling.

The Schaub 212 Northport has a zinc base material. For heavier-duty casework, the Deltana SBP35 modern square bar pull is described as heavy-duty solid brass, and the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. The Northport remains the choice where the transitional round profile and 5 inch center to center spacing are what the drawings call for.

That is what it is built for. Schaub lists the Northport collection as transitional styling, a round bar profile that reads cleanly against shaker and flat-panel doors without the industrial look of a square bar pull like the Deltana SBP35 or the Orca CK-12001 T-pull bar.

Yes. Schaub publishes a Proposition 65 warning for this product through its product stewardship page, which matters if you are shipping or installing in California and your project documentation requires the disclosure.

The Schaub 212 Northport is offered in Satin Nickel (SN), and also in Brushed Nickel (BN), Polished Nickel (PN), Polished Chrome (PC), Matte Black (MB), Ancient Bronze (ABZ), Brushed Bronze (BBZ), and Signature Satin Brass (SSB). If you need a bar-style companion in satin nickel, the Orca Hardware CK-12001 T-pull bar is supplied in satin nickel. Order a sample of each before committing a full fleet, since satin nickel reads differently between manufacturers.