Schaub 302 Skyevale Cabinet Pu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.00
$44.77
Schaub 302 128mm to 160mm Center to Center Skyevale Cabinet Pull with Crystal

Schaub 302 Skyevale Cabinet Pull with Crystal Accent, 128mm to 160mm Center to Center

(No reviews yet) Write a Review

Model: 302-15
From the Skyevale Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.00
$44.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 302 Skyevale Cabinet Pull with Crystal Accent, 128mm to 160mm Center to Center

The Schaub 302 Skyevale Cabinet Pull with Crystal Accent brings a Contemporary style to the Skyevale collection, pairing a zinc base with a crystal accent for a refined cabinet pull. This cabinet pull offers a 128mm to 160mm center to center mounting span, a 1-1/8" projection, and an overall length of 7-1/2", suited to a range of cabinet door and drawer widths. This pull pairs well with other Skyevale collection hardware for a cohesive look throughout the kitchen or bath.

Key Features

  • Center to Center Mounting: 128mm to 160mm center to center spacing allows installation across a range of cabinet door and drawer widths.
  • Overall Length: 7-1/2" overall length provides a substantial, easy to grip pull for cabinetry.
  • Projection: 1-1/8" projection from the mounting surface offers comfortable clearance for everyday use.
  • Base Material: Zinc base construction delivers a durable foundation for daily cabinet use.
  • Crystal Accent Detailing: A crystal accent set within the Skyevale collection design lends a Contemporary decorative touch to kitchen and bath cabinetry.
  • Style and Collection: Contemporary style within the Skyevale collection offers a cohesive design element for coordinated cabinet hardware.
  • Thread / Screw Size: M-4, Metric, 1" Long mounting thread for compatibility with standard cabinet hardware installations.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Closet and Storage Systems

Why Schaub 302?

Schaub 302 cabinet pulls combine a zinc base with Contemporary Skyevale styling and a crystal accent for a distinctive decorative statement. Built with a 128mm to 160mm center to center mounting option and a 7-1/2" overall length, this pull is designed to deliver dependable, everyday cabinet function alongside its decorative design.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Skyevale
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
M-4, Metric, 1" Long
Overall:
7-1/2"
Product Function:
Cabinet Pull
Product Dimension:
1-1/8"
Product Projection:
1-1/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
128/160 mm
Department:
Door Hardware

Schaub 302-15 – Frequently Asked Questions

1) What screws come with the Schaub Skyevale cabinet pull and will they work on a thick drawer front?
Mounting is M-4 metric machine screws, 1 inch long. That length covers a standard 3/4 inch cabinet door or drawer front with thread to spare. If you're mounting through a thicker slab front, a false front plus a drawer box wall, or adding a backplate, you'll need longer M-4 screws, since the supplied 1 inch will bottom out.
2) What is the closest alternative to the Schaub 302 Skyevale pull if I want the same look without the crystal?
Look at the Emtek 8405 Select cabinet pull from the Schaub collection. It is the same collection lineage as the Schaub 302 Skyevale, and it is catalogued as a cabinet knob/pull in the Emtek SELECT series, so it covers the same job of pulling a door or drawer front. The Schaub 302 carries a 128/160 mm center-to-center drilling and a 7-1/2 inch overall length, so if you swap you will want to confirm the Emtek SELECT drilling matches the holes already bored.
3) I need a solid brass cabinet pull instead of zinc - what should I use in place of the Schaub 302?
The Schaub 302 Skyevale pull has a zinc base material. If your spec calls for solid brass, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches. Both are shorter drillings than the Schaub 302's 128/160 mm, so on a retrofit you would be boring new holes rather than reusing the existing ones.
4) Can I use an Orca CK-15030 or CK-16030 knob in place of the Schaub 302 pull?
No - those are single-hole knobs, not two-hole pulls. The Orca CK-15030 and CK-16030 are round cabinet knobs at 1-1/4 inch diameter, and the Orca CK-17025 is a square knob at 25mm diameter. The Schaub 302 Skyevale is a cabinet pull drilled 128/160 mm center-to-center, so a knob leaves one of the two bored holes exposed. Knobs are a substitute only where you are drilling fresh or filling and refinishing the front.
5) Will a Trimco 553 or 562 drawer pull drop into the same holes as the Schaub 302?
Not without new drilling. The Trimco 553 series is a 3 inch center-to-center drawer pull and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center-to-center. The Schaub 302 Skyevale is drilled 128/160 mm, so none of those spacings line up with existing holes. Trimco drawer pulls are the choice when you are specifying fresh millwork or institutional casework rather than matching an existing bore pattern.
6) How much does the Schaub 302 pull stick out from the cabinet face?
Projection is 1-1/8 inches off the face, with the same 1-1/8 inch base dimension at the mounting posts. That matters in a galley kitchen or a tight hallway of cabinets, where a deeper pull catches hips and pockets. Overall length is 7-1/2 inches, so on 128mm centers there's roughly an inch of pull body past each screw.
7) How wide a drawer front do I need for a 7-1/2 inch Schaub Skyevale pull?
7-1/2 inches is the overall length, so the drawer front has to be wider than that with margin on each side for the pull to look right and for your fingers to clear the edge. On narrow drawers or on cabinet doors with a slim rail, it will crowd. Measure the flat face, not the door width, if you have raised panel or shaker fronts.
8) What is the Schaub 302 Skyevale pull made of, and will it hold up in a rental or commercial kitchen?
Base material is zinc, with a crystal accent in the body. Zinc die cast is a plated finish over a cast core, which is fine for residential and light commercial cabinetry but takes chips and finish wear harder than solid brass. For a high-turnover multifamily unit or a commercial break room where pulls get hit with carts, a solid brass bar pull like the Deltana SBP35 or the Omnia 1968 series is a tougher body.
9) What finishes does the Schaub Skyevale 302 pull come in?
Six: Satin Nickel, Polished Chrome, Black Chrome, Milano Bronze, Milano Silver, and Signature Satin Brass. If you're matching an existing kitchen, Satin Nickel and Polished Chrome are the two that read closest to common builder hardware; Milano Bronze and Milano Silver are Schaub's own hand-applied tones and won't have an exact equivalent in another brand's line.
10) I need to match Schaub Skyevale pulls across a whole kitchen including small drawers. What do I do about the narrow ones?
The 302 Skyevale covers 128mm and 160mm centers at 7-1/2 inches overall, which handles standard drawers and doors. Small spice pullouts and narrow banks won't take it. Schaub's Skyevale collection runs in matching profiles and finishes for those, so specify by the collection name and keep the finish code consistent across the order. Mixing a different brand's satin nickel next to Schaub's will show.
11) Should I use a crystal pull like the Schaub Skyevale or a plain bar pull?
The Skyevale 302 is a contemporary pull with a crystal element, so it's a decorative choice for a kitchen, vanity, or built-in where the hardware is meant to be seen. If the job is a rental, an office casework package, or anywhere pulls are utilitarian, a plain bar is the better call: the Orca CK-12001 T-pull bar in steel, or an Omnia 1969 or 1971 forged brass pull at 1-3/16 inch projection, both give you a clean profile with nothing to catch or chip.
12) The Schaub 302 sticks out too far from the door for my cabinet - what has a similar projection or less?
The Schaub 302 Skyevale pull has a 1-1/8 inch projection. Among modern pulls, the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection and the Omnia 1970 a 1-1/4 inch projection, so those stand slightly further off the face rather than closer to it. If clearance to an adjacent wall or appliance is the constraint, measure the swing before you commit to any of them.
13) What is a plainer alternative to the Schaub 302 for units where a crystal pull is too decorative?
For a stripped-down bar profile, the Emtek Bar cabinet pull from the Schaub collection and the Orca CK-12001 T-pull bar in steel with a 2 inch bar width are both straight-bar designs with no ornament. The Deltana SBP35 is a modern square bar pull in solid brass at 3-1/2 inch. All three read as plain bar hardware where the Schaub 302 Skyevale is a contemporary pull with a crystal element.
14) I am doing a period kitchen and the Schaub 302 is too modern - what else is in the same family?
The Emtek Alexander cabinet pull and the Emtek Art Deco cabinet pull are both Schaub collection pulls, in the Alexander and Art Deco series respectively, so they give you a different design language while staying in the same collection as the Schaub 302 Skyevale. Check the drilling on whichever series you pick against the 128/160 mm center-to-center you would be replacing.
15) I want to standardize cabinet pulls across a building - does the Schaub 302 or an Omnia series cover more drilling sizes?
The Schaub 302 Skyevale is drilled to accept both 128 mm and 160 mm center-to-center in a single part, with a 7-1/2 inch overall length and M-4 metric screws 1 inch long. On the Omnia side, the 1968/102 is a 4 inch center-to-center pull, and the 1969, 1970, and 1971 are separate modern pull series with 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch projections. Standardizing on Omnia means picking a series per opening; the Schaub 302 covers two common metric bores with one part number and one screw size to stock.
16) Is the Schaub Skyevale the same as the Schaub Collection pulls sold under the Emtek name?
They're related lines, not the same part. Emtek sells a Schaub Collection that includes the 8405 Select, Alexander, Art Deco, and Bar cabinet pulls, each its own series. The Skyevale 302 is a Schaub-branded contemporary crystal pull on 128/160mm centers. If a spec sheet calls out an Emtek Schaub Collection series by name, order that series, not the 302.
17) Is there a California Proposition 65 warning on the Schaub 302 cabinet pull?
Yes, Schaub publishes a Proposition 65 warning for this pull for California residents, linked through Schaub and Company's product stewardship information. If you're a California specifier or a facilities buyer with disclosure requirements on your submittal package, pull the warning language from that stewardship page for your file.
18) Does the Schaub 302 work as a vanity or built-in furniture pull, not just kitchen cabinets?
It works anywhere the hole spacing and face width allow. At 128mm or 160mm centers, 7-1/2 inches overall and 1-1/8 inch projection, it suits bath vanity drawers, closet built-ins, and furniture-grade casework as readily as kitchen fronts. The crystal detail and the six finishes are why it gets specified on visible millwork rather than back-of-house cabinetry.
19) Is the SDC SP50 spindle a replacement part for the Schaub 302 cabinet pull?
No. The SDC SP50 is a 50mm spindle for door controls - it carries a lever or knob through a door lock, and has nothing to do with cabinetry. The Schaub 302 Skyevale is a cabinet pull mounted through a cabinet or drawer front with M-4 metric screws 1 inch long. If you are replacing fasteners on the Schaub 302, you are looking for M-4 machine screws, not a spindle.
How fast can I get the Schaub 302-15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 302-15 come with a warranty?
Absolutely. The Schaub 302-15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 302-15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 302-15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!