Schaub 221 128mm Center to Center Classico Cabinet Pull

Mounting is M4 metric thread, not the 8-32 screws most US cabinet hardware ships with. If you are swapping onto doors and drawers already drilled for 8-32, the holes themselves are fine, but you need to use the M4 screws supplied with the pull rather than reusing the old ones. Worth knowing before you order a run of them for a kitchen.

The Schaub 221 Classico cabinet pull is built on a zinc base material. If solid brass construction is what the job calls for, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Deltana SBP35 modern square bar pull is a heavy-duty solid brass bar pull at 3-1/2 inch. Note the mounting centers differ from the 128 mm centers the Schaub 221 uses, so a swap into existing drilled cabinet fronts is not a drop-in unless the holes are redrilled.

The Schaub 221 Classico pull has a 7/8 inch projection off the cabinet face. For more knuckle clearance, the Omnia 1969 and Omnia 1971 modern cabinet pulls are both forged solid brass at 1-3/16 inch projection, and the Omnia 1970 runs 1-1/4 inch projection. Projection matters where doors sit next to an appliance handle or in a tight galley run, so measure the swing clearance before committing.

The Schaub 221 Classico pull is drilled at 128 mm centers, so it will not land on 96 mm or 3 inch holes. The Trimco 553 series drawer pulls are 3 inch center-to-center, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96 mm center-to-center options. For an institutional casework or millwork package where the existing bore pattern is fixed, matching centers is the deciding spec.

Seven finishes: Smooth Satin Nickel (SSN), Polished Chrome (PC), Matte Chrome (MC), Gun Metal (GM), Matte Black (MB), Matte White (MW), and Signature Satin Brass (SSB). For a property manager standardizing across units, Smooth Satin Nickel and Matte Black are the two that tend to match the widest range of existing appliance and faucet finishes. Matte White is the odd one out and is generally chosen to disappear into a painted or white slab door.

A knob replaces a two-hole pull with a single-screw fixing, so it is not a hole-for-hole swap for the 128 mm centers of the Schaub 221 Classico. If a knob suits the door, the Orca Hardware Bachelor Collection round cabinet pull knob is 1-1/4 inch diameter, the Bachelor Collection round ring version is also 1-1/4 inch diameter, and the Blackcomb Collection square cabinet pull knob is 25 mm diameter. Knobs are commonly specified on doors with pulls kept for drawers, so mixing the two across one kitchen or casework run is normal.

The Schaub 221 is the Classico collection pull, contemporary in style, at 128 mm centers with a 5-3/8 inch overall length. Emtek carries Schaub Collection pulls under its own part numbers in several distinct series: the Emtek 8405 Select cabinet pull in the Emtek SELECT series, the Emtek Alexander cabinet pull in the Alexander series, the Emtek Art Deco cabinet pull in the Art Deco series, and the Emtek Bar cabinet pull in the Bar series. Those Emtek items are catalogued as cabinet knob/pull, so confirm the exact series and mounting centers when matching an existing run rather than assuming the Classico profile carries over.

The Schaub 221 Classico pull is supplied in Smooth Satin Nickel, Polished Chrome, Gun Metal, Matte Chrome, Matte Black, Matte White, and Signature Satin Brass, which covers both the warm and cool ends of a unit refresh from one part number at 128 mm centers. The Omnia 1968/102, Omnia 1969, Omnia 1970, Omnia 1971, and Deltana SBP35 are forged or solid brass bodies, which is the route to take when the spec calls for a brass substrate rather than a plated zinc one. Standardizing on a single center-to-center dimension across the property keeps future replacements a stock item rather than a redrill.

Emtek carries the Schaub Collection directly, which is the same design lineage in an Emtek part number. The Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull are all Schaub Collection pieces. If you are already specifying Emtek trim on the doors in a project and want the cabinet hardware to come from the same order, those are the ones to look at. The 221 Classico itself is a contemporary style pull in the Classico collection.

A pull gives you two mounting points and a 5-3/8 inch grip length, so it spreads load and is easier on hands in a high traffic kitchen or a rental turn. A knob takes a single hole and is faster to install on a retrofit where you are only drilling one bore. If knobs suit the job, the Orca Hardware Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, and the Orca Blackcomb square knob is 25 mm. Mixing is common: pulls on drawers, knobs on doors.

No. The SDC SP50 is a 50 mm spindle for door controls - it is the square bar that drives a lockset or lever, not a graspable handle mounted to a cabinet face. The Schaub 221 Classico is a cabinet pull, mounted through the door or drawer front on M-4 metric screws at 128 mm centers. Ordering a spindle against a cabinet pull line item is a returns ticket, so check the function before releasing the order.