Schaub 222 Classico Cabinet Pu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$35.00
$20.76
Schaub 222 160mm Center to Center Classico Cabinet Pull

Schaub 222 Classico Cabinet Pull with 160mm Center to Center and Contemporary Style

(No reviews yet) Write a Review

Model: 222-26
From the Classico Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$35.00
$20.76
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 222 Classico Cabinet Pull with 160mm Center to Center and Contemporary Style

The Schaub 222 Classico Cabinet Pull is a contemporary style cabinet pull designed with a zinc base material for dependable, everyday performance in residential and commercial cabinetry. This pull features a 160 mm center to center hole spacing, a 6-3/4" overall length, a 5/8" base dimension, and a 7/8" projection from the mounting surface, giving it a comfortable profile for cabinet doors and drawers. As part of the Classico collection, the 222 pull pairs a clean, contemporary silhouette with practical proportions suited to kitchens, bathrooms, and custom furniture. The pull is sized for M-4 Metric 1 mounting hardware, and a Proposition 65 Warning applies for California residents.

Key Features

  • Center to Center: 160 mm center to center spacing is sized for standard cabinet pull installations, simplifying layout.
  • Overall Length: 6-3/4" overall length offers a substantial grip surface for cabinet doors and drawers.
  • Base Dimensions: 5/8" base dimension keeps the mounting footprint compact and streamlined against the cabinet surface.
  • Projection: 7/8" projection from the mounting surface provides comfortable clearance for everyday handling.
  • Base Material: Zinc construction supports durable, long lasting performance for frequently used cabinet hardware.
  • Thread / Screw Size: M-4 Metric 1 sizing for compatible mounting hardware during installation.
  • Design Style: Contemporary style within the Classico collection delivers a cohesive, modern look across cabinetry and furniture.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 6-3/4"
  • Product Dimension: 5/8"
  • Product Projection: 7/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Residential Remodeling Projects
  • Closet and Storage Systems
  • Commercial Cabinetry Installations
  • Multi Family Residential Properties

Why Schaub 222?

Schaub 222 Classico cabinet pulls combine a zinc base material with precise 160 mm center to center spacing for dependable, repeatable installations across cabinetry projects. The contemporary profile, 6-3/4" overall length, and 7/8" projection suit professional grade cabinet and furniture applications where consistent fit and finish matter.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Classico
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
M-4 Metric 1
Overall:
6-3/4"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
7/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
160 mm
Department:
Door Hardware

Schaub 222-26 – Frequently Asked Questions

1) What screws does the Schaub 222 cabinet pull take, and will the ones in my drawer front work?
The 222 is tapped for M4 metric screws, not the 8-32 machine screws used on most North American cabinet hardware. Your existing screws almost certainly will not thread into it. Order M4 screws long enough for your door or drawer front thickness plus the 5/8 inch base depth of the post.
2) Is the Emtek Schaub Collection the same hardware as the Schaub 222 Classico pull?
They are related but not interchangeable. Emtek catalogs a Schaub Collection that includes the Emtek 8405 Select cabinet pulls, the Alexander cabinet pull, the Art Deco cabinet pull and the Bar cabinet pull, each a distinct series. The Schaub 222 is the Classico collection with a 6-3/4 inch overall length, 7/8 inch projection and 160 mm centers. If a drawing or an existing run of cabinets calls out Classico, ordering an Emtek Alexander or Art Deco pull gets a different profile even though both sit under the Schaub name.
3) What should I use instead of a 160 mm pull on drawers that are too narrow for a 6-3/4 inch pull?
The Schaub 222 Classico pull measures 6-3/4 inch overall on 160 mm centers, which needs a fair amount of drawer face. For narrow drawers, the Trimco 553 series drawer pulls are 3 inch center-to-center and the Trimco 562 series comes in 3-1/2 inch, 4 inch and 96 mm center-to-center options. The Deltana SBP35 modern square bar pull is 3-1/2 inch. On very narrow faces a knob replaces the pull entirely and needs only a single hole: the Orca Hardware CK-15030 and CK-16030 Bachelor Collection knobs are 1-1/4 inch diameter and the CK-17025 Blackcomb square knob is 25 mm.
4) How much clearance do I need behind a Schaub 222 Classico pull for hands in gloves or a tight galley run?
Projection is 7/8 inch off the face of the door, so you get roughly that much finger space between the bar and the cabinet front. That's a moderate standoff, fine for a normal grip but tighter than some modern bar pulls, for reference the Omnia 1970 runs a 1-1/4 inch projection and the Omnia 1969 and 1971 sit at 1-3/16 inch. In a narrow galley or a passage where a pull sticks into traffic, the shallower 7/8 inch is the friendlier number.
5) Is a zinc cabinet pull tough enough for rental units or a commercial break room?
The 222 Classico is a die cast zinc pull with a plated or painted finish over it. Zinc holds up fine to normal residential and light commercial pulling loads, the wear point is the finish rather than the body, so matte and painted finishes like Matte Black and Matte White will show handling marks in a heavy-traffic kitchen sooner than a plated Polished Chrome or Satin Nickel will. If you want a solid brass body instead for a high-abuse opening, the Deltana SBP35 square bar pull and the Omnia 1968/102 are both solid brass.
6) Which cabinet pull carries a heavier bar for a commercial kitchen or high-traffic millwork run?
The Schaub 222 Classico is a contemporary-style zinc pull with a 5/8 inch base dimension and 7/8 inch projection. Where a heavier bar is wanted, the Deltana SBP35 modern square bar pull is described as heavy-duty solid brass, and the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. The Omnia 1970 carries a 1-1/4 inch projection and the Omnia 1969 and 1971 a 1-3/16 inch projection, all forged solid brass, so they stand further off the face than the 7/8 inch Schaub 222 - worth checking against clearance in a galley aisle.
7) I need satin nickel cabinet hardware to match existing cabinets - what are my options besides the Schaub 222?
The Schaub 222 Classico pull is offered in Smooth Satin Nickel (SSN) along with Polished Chrome, Matte Chrome, Gun Metal, Matte Black, Matte White and Signature Satin Brass. If the run also needs a bar pull in satin nickel, the Orca Hardware CK-12001 T-pull bar is a steel bar in satin nickel with a 2 inch bar width. Because nickel tone varies by manufacturer and by base material - the Schaub 222 is zinc while the Orca bar is steel - order a sample of each before committing a whole fleet of doors to a mixed-brand mix.
8) Will an Omnia or Trimco pull reuse the same screws as the Schaub 222?
Not necessarily. The Schaub 222 Classico pull takes an M-4 metric screw, which follows from its 160 mm metric center spacing. The Trimco 553 and 562 series are drawer pulls dimensioned in inches - 3 inch on the 553, and 3-1/2 inch, 4 inch or 96 mm on the 562 - and the Omnia 1968/102 is spaced at 4 inch. Where a substitute is spaced in inches, plan on the mounting screws that ship with that pull rather than reusing M-4 hardware, and expect to redrill the cabinet face.
9) What is the difference between the Omnia 1968, 1969, 1970 and 1971 pulls when substituting for a Schaub 222?
All four are Omnia modern cabinet pulls in forged solid brass, each its own series. The 1968/102 is spaced at 4 inch center-to-center. The 1969 and 1971 each carry a 1-3/16 inch projection, and the 1970 a 1-1/4 inch projection. Against the Schaub 222 Classico, which projects 7/8 inch, any of the Omnia pulls sits further off the cabinet face - the deciding factor on an inset door or where a drawer opens next to a wall return.
10) Can I mix the Schaub 222 pull with knobs from the same look on the smaller doors?
Yes, and that's the usual approach on a kitchen: 160 mm pulls on the drawer banks and tall doors, knobs on the upper doors. The 222 belongs to Schaub's Classico collection in a contemporary style, so pair it with other Classico pieces to keep the profile and finish consistent. Emtek also carries the Schaub Collection under its SELECT cabinet hardware line if you need to widen the range while staying in the same family.
11) Is the SDC SP50 spindle a substitute for a cabinet pull?
No. The SDC SP50 is a 50 mm spindle for door controls - it is the square bar that carries a lever through a door latch, not a graspable pull mounted to a cabinet face. The Schaub 222 Classico is a cabinet pull that mounts on 160 mm centers with M-4 screws. A search for a bar or spindle can surface both, but only one of them attaches to a drawer front.
How fast can I get the Schaub 222-26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 222-26 come with a warranty?
Absolutely. The Schaub 222-26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 222-26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 222-26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!