Schaub 223 Classico Cabinet Pu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$36.00
$23.63
Schaub 223 192mm Center to Center Classico Cabinet Pull

Schaub 223 Classico Cabinet Pull, 192mm Center to Center, Zinc Contemporary Style

(No reviews yet) Write a Review

Model: 223-26
From the Classico Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$36.00
$23.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 223 Classico Cabinet Pull, 192mm Center to Center, Zinc Contemporary Style

The Schaub 223 Classico Cabinet Pull brings a Contemporary design sensibility to the Classico collection, offering a 192 mm center to center mounting span suited to cabinet doors and drawers. Built with a zinc base material, this cabinet pull measures 8-1/8 overall with a 5/8 base dimension and a 7/8 projection from the mounting surface. The pull installs using an M-4, Metric, 1 thread, making it a practical choice for coordinated kitchen or bath cabinetry updates.

Key Features

  • Center to Center Spacing: 192 mm center to center spacing allows straightforward alignment with standard cabinet door and drawer mounting patterns.
  • Overall Length and Base Dimension: Measures 8-1/8 overall with a 5/8 base dimension for a proportional fit on cabinet faces.
  • Projection: Extends 7/8 from the mounting surface, providing clearance for a comfortable grip.
  • Zinc Construction: Built from zinc base material for durable, functional cabinet hardware performance.
  • Classico Collection, Contemporary Style: Part of the Classico collection with a Contemporary design aesthetic that complements modern cabinetry.
  • Thread / Screw Size: M-4, Metric, 1 mounting thread for standard metric cabinet hardware installation.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: M-4 Metric 1
  • Overall: 8-1/8"
  • Product Dimension: 5/8"
  • Product Projection: 7/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Residential Remodeling Projects
  • Commercial Millwork
  • Retail Display Cabinetry
  • Office Casework

Why Schaub 223?

Schaub cabinet hardware from the Classico collection pairs a zinc base material with a Contemporary design, giving the 223 pull a dependable, proportioned profile for everyday cabinet use. With a 192 mm center to center span, 8-1/8 overall length, and 7/8 projection, this pull is sized for straightforward installation on standard cabinet doors and drawers. It offers a practical, coordinated hardware option for kitchens, baths, and custom cabinetry projects.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Classico
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
M-4 Metric 1
Overall:
8-1/8"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
7/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
192 mm
Department:
Door Hardware

Schaub 223-26 – Frequently Asked Questions

1) What screws does the Schaub 223 cabinet pull take, and will standard 8-32 cabinet screws work?
The 223 Classico is tapped M4 metric, not 8-32. Standard US 8-32 cabinet screws will not thread into it, so use the M4 machine screws supplied with the pull or source M4 replacements in the length your door or drawer front thickness needs.
2) Is an Emtek Schaub Collection pull the same as the Schaub 223 Classico?
They are related but not interchangeable parts. The Emtek Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull and the Emtek Bar cabinet pull are all carried under the Emtek Schaub Collection, each in its own series - Emtek SELECT, Alexander, Art Deco and Bar respectively. The Schaub 223 is the Classico collection, a contemporary style pull at 192 mm center to center with 7/8 inch projection. Ordering an Emtek Schaub Collection pull will not by itself get you a Classico 223.
3) What is a solid brass alternative to the Schaub 223 Classico cabinet pull?
The Schaub 223 Classico pull is built on a zinc base material. If a solid brass body is what the job calls for, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Deltana SBP35 modern square bar pull is a heavy-duty solid brass bar pull at 3-1/2 inches. Note the spacing difference: the Schaub 223 is 192 mm center to center, so neither of those drops into the same existing bore holes.
4) What should I use on drawers where the Schaub 223 192mm pull is too long?
The Schaub 223 runs 8-1/8 inches overall on 192 mm centers, which is a lot of pull for a narrow drawer face. For shorter spans the Trimco 553 series drawer pulls are 3 inch center to center, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch and 96 mm center-to-center options - the 96 mm being the metric step below 192 mm if you are keeping the bore layout metric across a kitchen.
5) How much room do I need behind the Schaub 223 pull for fingers and door clearance?
The Classico 223 projects 7/8 inch off the face of the door, with a 5/8 inch base dimension where it meets the surface. That 7/8 inch is your knuckle clearance, and it is also what you need to check against an adjacent wall, an appliance panel, or a door that swings past another face in a corner run.
6) What is the Schaub 223 Classico pull made of, and is zinc durable enough for a rental or multi-family kitchen?
Base material is zinc, die cast and then finished. For residential and multi-family cabinet duty it holds up fine, since a cabinet pull carries hand load rather than door weight. If you are spec'ing hardware for a high-traffic commercial or hospitality run and want solid brass instead, the Omnia 1968 and 1969 Modern Cabinet Pulls and the Deltana SBP35 square bar pull are forged or solid brass alternatives.
7) Should I use a bar pull like the Schaub 223 or a knob on my cabinet doors?
A pull like the Classico 223 gives you a full hand grip and is what most people want on drawers, especially heavy ones, and on tall pantry or appliance doors. Knobs suit small upper doors and tight layouts where an 8-1/8 inch pull would look oversized. If you want knobs in the same run, the Orca Hardware Bachelor Collection round knob and the Blackcomb Collection square knob are 1-1/4 inch and 25mm diameter options.
8) I need a smaller pull to match the Schaub 223 on upper cabinets. What else is there?
The 223 is a single 192 mm center to center size. For shorter spacings in a comparable contemporary bar style, the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center to center, and the Trimco 553 Series is 3 inch center to center. The Omnia 1968/102 runs 4 inch center to center in forged solid brass. Finishes will not match the Schaub Classico codes exactly across brands, so keep one brand per visible run.
9) What is a steel bar pull option in satin nickel similar to the Schaub 223 Classico?
The Schaub 223 Classico is a zinc-base contemporary pull offered in seven finishes including Smooth Satin Nickel. For a steel bar pull in satin nickel, the Orca Hardware CK-12001 T-pull bar is steel in satin nickel with a 2 inch bar width. It is a different profile and construction, so confirm the bore spacing on the door before treating it as a stand-in.
10) Which pulls project further off the cabinet face than the Schaub 223?
The Schaub 223 Classico has a 7/8 inch projection. If you need more knuckle clearance - gloved hands in a shop, or a heavy drawer front - the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 modern cabinet pulls are forged solid brass at 1-3/16 inch projection.
11) What finishes does the Schaub 223 Classico pull come in for matching the rest of a kitchen?
Seven finishes: Smooth Satin Nickel, Polished Chrome, Matte Chrome, Gun Metal, Matte Black, Matte White, and Signature Satin Brass. That is the full range, so if you are matching an existing run, order the same finish code across every size in the Classico collection rather than mixing brands.
12) Does the SDC SP50 spindle work with the Schaub 223 cabinet pull?
No. The SDC SP50 is a 50 mm spindle used in door controls, not cabinet hardware. The Schaub 223 is a cabinet pull that mounts with M-4 metric screws on 192 mm centers. The two serve different functions and have no fastening in common.
How fast can I get the Schaub 223-26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 223-26 come with a warranty?
Absolutely. The Schaub 223-26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 223-26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 223-26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!