You may also like
Schaub 451 Finestrino Angled Rectangular Cabinet Pull with 160mm Center to Center Spacing
Model: SCH-451
Schaub 451 Finestrino 160mm Center to Center Angled Rectangular Cabinet Pull in ZincThe Schaub 451 Finestrino cabinet pull brings a contemporary angled rectangular profile to kitchen and bath...
Schaub
$35.00
$23.61
Schaub 446 Finestrino Rectangular Cabinet Pull with 192mm Center to Center Spacing
The Schaub 446 Finestrino Rectangular Cabinet Pull is a contemporary cabinet pull from the Finestrino collection, designed to bring clean architectural lines to kitchen and bath cabinetry. This pull features a 192mm center to center hole spacing and an overall size of 8-1/2" x 2-1/8", with a 7/8" projection from the mounting surface. Constructed from zinc and installed with an M4 thread screw size, it offers dependable performance for everyday cabinet and drawer applications.
Key Features
- Center to Center Spacing: 192mm center to center hole spacing allows for straightforward installation on cabinet doors and drawers.
- Overall Dimensions: Measures 8-1/2" x 2-1/8" overall, delivering a substantial rectangular profile suited to the Finestrino collection.
- Projection: Extends 7/8" from the mounting surface for a comfortable, secure grip.
- Zinc Base Material: Zinc base material provides a sturdy foundation for frequent cabinet and drawer use.
- Contemporary Finestrino Style: Rectangular silhouette from the Finestrino collection brings a clean, contemporary look to cabinetry.
- Thread / Screw Size: M4 thread for compatible mounting hardware.
Certifications & Compliance
- Proposition 65 Warning applies for California residents.
Technical Specifications
- Subcategory: Cabinet Pulls
- Product Type: Cabinet Pulls
- Product Group: Cabinet Hardware
- Product Subgroup: Cabinet Pulls
- MAP Policy: Yes
- Thread / Screw Size: M4
- Product Category: Cabinet Hardware
- Department: Door Hardware
Typical Applications
- Residential Kitchen Cabinetry
- Bathroom Vanities
- Commercial Cabinetry Installations
- Custom Furniture Projects
- Office Cabinetry
- Retail Display Cabinetry
- Multi-Family Residential Properties
Why Schaub Finestrino?
Schaub Finestrino cabinet pulls combine a contemporary rectangular design with durable zinc construction, delivering reliable performance for everyday cabinet and drawer use. With precise 192mm center to center spacing and a comfortable 7/8" projection, this pull is built for consistent, professional-grade installation in residential and commercial cabinetry alike.
Manufacturer Resources
Schaub Product Catalog
Product Specs
- Subcategory:
- Cabinet Pulls
- Collection:
- Finestrino
- Product Type:
- Cabinet Pulls
- Product Group:
- Cabinet Hardware
- Product Subgroup:
- Cabinet Pulls
- MAP Policy:
- Yes
- Thread / Screw Size::
- M4
- Overall:
- 8-1/2" x 2-1/8"
- Product Function:
- Cabinet Pull
- Product Projection:
- 7/8"
- Product Style:
- Contemporary
- Product Material:
- Zinc
- Product Category:
- Cabinet Hardware
- (CTC) Center-to-Center:
- 192 mm
- Department:
- Door Hardware
Schaub 446-MB – Frequently Asked Questions
1) Is the Schaub 446 Finestrino pull solid brass or zinc?
Zinc is the base material on the 446 Finestrino. That matters if you are specifying for a coastal property or a heavy-traffic commercial kitchen, where solid brass holds up better to moisture and constant handling. Deltana's SBP Series square bar pull and the Omnia 1968, 1969, 1970 and 1971 pulls are forged or solid brass options in a similarly modern shape if brass is what the spec calls for.
2) I'm replacing pulls across a whole unit turnover. Will the Finestrino 446 match my existing holes?
Only if the existing fronts are bored at 192 mm. The 446 is a fixed 192 mm center to center pull, so it is a straight swap on 192 mm boring and a redrill on anything else. On a mixed cabinet run where drawer sizes vary, the 8-1/2 inch overall length also rules it out on the narrower fronts, so most turnovers pair it with a shorter pull from the same collection on the small drawers.
3) What is the closest alternative to the Schaub 446 Finestrino pull if I want the same contemporary rectangular look in solid brass instead of zinc?
The Schaub 446 Finestrino is a contemporary-style cabinet pull with a zinc base material. If solid brass construction is the requirement, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, and the Deltana SBP35 is a modern square bar pull in solid brass at 3-1/2 inch. Note the spacing difference: the 446 is drilled at 192 mm center to center, so neither brass option lands on the same hole pattern - moving to one of them means new boring on the door or drawer front.
4) Can I substitute an Orca Hardware Bachelor knob for the Schaub 446 Finestrino pull?
No - those are different mounting patterns. The Schaub 446 is a two-post cabinet pull drilled at 192 mm center to center with M4 screws. The Orca Hardware CK-15030 Bachelor Collection round knob and CK-16030 round ring knob are 1-1/4 inch diameter cabinet knobs, and the CK-17025 Blackcomb square knob is 25mm - all single-hole knobs. Swapping a knob onto a front that was bored for the 446 leaves two exposed holes. A knob is only an option on new fronts or where the old holes will be filled and refinished.
5) What finishes does the Schaub 446 Finestrino cabinet pull come in?
Five: Satin Nickel (SN), Polished Chrome (PC), Burnished Bronze (BRBZ), Matte Chrome (MC), and Matte Black (MB). That is the complete finish range on the 446. Matte Chrome and Matte Black are the two that read flattest against a slab or painted contemporary door; Burnished Bronze is the only warm tone in the group.
6) Should I use a rectangular pull like the Schaub Finestrino or a knob on my cabinets?
A rectangular pull like the 446 Finestrino gives you a full hand grip across 8-1/2 inches, which is what you want on heavy drawers, pot drawers, and pantry doors where a single-point grip fights you. Knobs suit small upper doors and light drawers. If you want the knob for uppers and a matching modern look, the Orca Bachelor Collection round knob at 1-1/4 inch diameter or the Blackcomb square knob at 25 mm are the equivalent picks. For a middle ground on medium drawers, Trimco's 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96 mm center to center.
7) Is the Emtek 8405 Select the same pull as the Schaub 446 Finestrino?
They are related but not the same part. The Schaub 446 belongs to the Finestrino collection. The Emtek 8405 is an Emtek SELECT series cabinet knob/pull carried under the Schaub collection, as are the Emtek Alexander, Emtek Art Deco, and Emtek Bar cabinet pulls - each its own series. If a drawing calls out Finestrino, ordering an 8405 gets a different profile. Specify the collection name, not just the brand, when matching an existing run of cabinetry.
8) For a commercial or back-of-house cabinet run, is there a steel pull instead of the zinc Schaub 446?
The Schaub 446 Finestrino has a zinc base material and comes in Satin Nickel, Polished Chrome, Burnished Bronze, Matte Chrome, and Matte Black. Where a steel body is preferred, the Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel, finished satin nickel. That gives a satin nickel match to one of the 446 finishes in a different base metal, though the mounting pattern is not the same 192 mm as the 446 - confirm the bore before ordering it as a drop-in.
9) What is the Schaub Finestrino collection, and can I get other sizes to match?
Finestrino is Schaub's contemporary rectangular pull collection, and the 446 is the 192 mm center to center size in it. Schaub sells the Finestrino profile in a run of center to center sizes, so you can carry the same face across a kitchen and step down the length on the smaller drawers. Emtek also carries Schaub collections under its SELECT cabinet hardware program, which is where to look if you are matching Schaub styling to an Emtek door hardware package.
10) Is there a California Proposition 65 warning on Schaub cabinet pulls?
Yes, Schaub publishes a Proposition 65 warning for California residents on the 446 Finestrino, linked through the manufacturer's product stewardship page. If you are supplying a California job and your submittal package requires the warning language on file, pull it from Schaub directly.
11) I am standardizing one pull profile across a whole unit - which alternatives to the Schaub 446 cover both drawers and doors in matching series?
The Schaub 446 Finestrino at 192 mm center to center suits wider drawer fronts and full-height doors. If a project needs several sizes in one visual family, the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center, so small drawers and larger fronts can carry the same profile. The Omnia 1968/102 at 4 inch center to center sits in the 1968 Cabinet Pulls Series, with the 1969, 1970, and 1971 series as adjacent modern profiles in forged solid brass.
How fast can I get the Schaub 446-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 446-MB come with a warranty?
Absolutely. The Schaub 446-MB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 446-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schaub 446-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.