You may also like
Schaub 446 Finestrino Rectangular Zinc Cabinet Pull, 192mm Center to Center
Model: SCH-446
Schaub 446 Finestrino Rectangular Cabinet Pull with 192mm Center to Center SpacingThe Schaub 446 Finestrino Rectangular Cabinet Pull is a contemporary cabinet pull from the Finestrino collection,...
Schaub
Starting at
$46.00
$26.93
Schaub 451 Finestrino 160mm Center to Center Angled Rectangular Cabinet Pull in Zinc
The Schaub 451 Finestrino cabinet pull brings a contemporary angled rectangular profile to kitchen and bath cabinetry, offering a refined update for modern spaces. This pull features a 160mm center to center hole spacing, a 7/8" projection, and an overall size of 7" x 1-3/4", making it a versatile choice for drawers and cabinet doors alike. Crafted from zinc for a sturdy, dependable feel, this pull is part of the Finestrino collection and is designed to function as a durable cabinet pull suited for everyday use in residential and commercial settings. The M4 thread / screw size supports standard mounting hardware, helping ensure a straightforward, secure installation on compatible cabinetry.
Key Features
- Overall Dimensions: Measures 7" x 1-3/4" overall, providing a substantial yet proportionate size for standard cabinet doors and drawers.
- Center to Center Spacing: 160mm center to center hole spacing allows for accurate, consistent installation across matching cabinetry.
- Projection: Extends 7/8" from the mounting surface, offering a comfortable grip without overwhelming the cabinet face.
- Base Material: Constructed from zinc, delivering a solid, durable feel suited to daily cabinet use.
- Finestrino Collection Design: The angled rectangular silhouette reflects a contemporary style that complements modern kitchen and bath cabinetry.
- Contemporary Style: Clean geometric lines make this pull a versatile match for a range of cabinetry styles and finishes.
- Thread / Screw Size: M4 thread specification is designed for compatible mounting hardware.
- Consistent Hole Spacing: Standardized 160mm spacing simplifies replacement projects when matching existing cabinet hardware layouts.
Certifications & Compliance
- California Proposition 65 Warning applies for California residents; refer to manufacturer documentation for details.
Technical Specifications
- Subcategory: Cabinet Pulls
- Product Type: Cabinet Pulls
- Product Group: Cabinet Hardware
- Product Subgroup: Cabinet Pulls
- MAP Policy: Yes
- Thread / Screw Size: M4
- Product Category: Cabinet Hardware
- Department: Door Hardware
Typical Applications
- Kitchen Cabinetry
- Bathroom Vanities
- Custom Furniture Pieces
- Residential Remodeling Projects
- Commercial Millwork
- Builder and Design Projects
Why Schaub 451?
Schaub 451 Finestrino cabinet pulls combine a zinc base material with precise 160mm center to center spacing and a 7/8" projection for reliable, consistent performance across a kitchen or bath remodel. The angled rectangular Finestrino design brings a contemporary aesthetic to cabinetry while maintaining the functional durability expected of everyday hardware. With an overall size of 7" x 1-3/4" and an M4 thread / screw size, this pull is built to integrate cleanly into both residential and commercial cabinetry projects.
Manufacturer Resources
Schaub Product Catalog
Product Specs
- Subcategory:
- Cabinet Pulls
- Collection:
- Finestrino
- Product Type:
- Cabinet Pulls
- Product Group:
- Cabinet Hardware
- Product Subgroup:
- Cabinet Pulls
- MAP Policy:
- Yes
- Thread / Screw Size::
- M4
- Overall:
- 7" x 1-3/4"
- Product Function:
- Cabinet Pull
- Product Projection:
- 7/8"
- Product Style:
- Contemporary
- Product Material:
- Zinc
- Product Category:
- Cabinet Hardware
- (CTC) Center-to-Center:
- 160 mm
- Department:
- Door Hardware
Schaub 451-BRBZ – Frequently Asked Questions
1) Will the Schaub 451 Finestrino pull drop into existing 160mm cabinet holes?
Yes. The Finestrino 451 is drilled on 160 mm center-to-center, so it lands on existing 160 mm bores with no re-drilling. Overall length is 7 inches, which gives about a half inch of pull body past each hole, so check that your drawer face is wide enough to carry a 7 inch pull.
2) What screw size does the Schaub 451 cabinet pull take?
M4 machine screws. That is metric thread, not the 8-32 used on a lot of North American cabinet hardware, so don't plan on reusing the screws from an old 8-32 pull. If your drawer fronts are thicker than standard because of an applied panel, order longer M4 screws to suit.
3) My cabinets are bored at 3-1/2 or 4 inch centers, not 160mm. What should I use instead?
The 451 Finestrino is a 160 mm pull only, so it will not land on 3-1/2 or 4 inch holes. For 3-1/2 inch, the Deltana SBP35 square bar pull matches. For 4 inch centers the Omnia 1968/102 is spaced at 4 inches, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96 mm. Trimco 553 is a 3 inch ctc drawer pull.
4) What is a solid brass alternative to the Schaub 451 Finestrino cabinet pull?
The Schaub 451 Finestrino pull is built on a zinc base material with a 7/8 inch projection. If a forged solid brass body is required by the spec, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. The Deltana SBP35 modern square bar pull is also solid brass, in a 3-1/2 inch size. Note that those brass options come in shorter center-to-center spacings than the Schaub 451's 160 mm, so hole spacing must be re-laid out rather than reused.
5) What should I use instead of the Schaub 451 on a narrow drawer front?
The Schaub 451 needs 160 mm center to center and measures 7 inches by 1-3/4 inches overall, which is more width than a narrow drawer or a small vanity front will take. For tighter fronts, the Trimco 553 series drawer pulls are 3 inch center to center and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96 mm center-to-center options. Where a single-hole part is acceptable, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob is 1-1/4 inch diameter and the CK-17025 Blackcomb square knob is 25 mm.
6) How much finger clearance is there behind the Finestrino 451 pull?
Projection is 7/8 inch off the face, measured from the cabinet front to the outside of the pull, so the usable grip gap behind the bar is less than that. It is a slim contemporary profile, fine for kitchen and bath cabinetry but tight if you want a full-hand grip on a heavy pantry drawer.
7) What finishes does the Schaub 451 Finestrino pull come in?
Five: Satin Nickel, Polished Chrome, Matte Chrome, Matte Black, and Burnished Bronze. If you're matching a fleet of units, Satin Nickel and Matte Black are the two that most commonly sit alongside existing appliance and faucet finishes.
8) Is the Schaub 451 solid brass or plated zinc?
Zinc base material with a plated finish. That is the usual construction for angled rectangular contemporary pulls at this size. If a specification calls for solid brass, look at the Omnia 1968/102 or Omnia 1970, both forged solid brass modern pulls, or the Deltana SBP35 square bar pull in solid brass.
9) Can I use an Emtek cabinet pull in place of the Schaub 451?
Emtek carries Schaub Collection cabinet pulls, including the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pull, all catalogued as cabinet knob/pull. The Schaub 451 is a Finestrino collection angled rectangular pull at 160 mm center to center with an overall size of 7 inches by 1-3/4 inches, so matching an Emtek Schaub Collection pull to an existing 451 means confirming the drilling spacing and the profile family, since the Alexander, Art Deco, and Bar series are distinct styles from Finestrino.
10) Is a bar pull the same thing as the Schaub 451 Finestrino pull?
No. The Schaub 451 is an angled rectangular Finestrino pull with a 7/8 inch projection and a flat rectangular profile, 7 inches by 1-3/4 inches overall. Bar pulls are a different profile: the Deltana SBP35 is a modern square bar pull in the SBP series, the Emtek Bar cabinet pull is its own Bar series, and the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. They are not visual matches for a Finestrino run even where hole spacing happens to line up.
11) Which alternative to the Schaub 451 gives more hand clearance off the cabinet face?
The Schaub 451 projects 7/8 inch from the face. If a gloved hand or a thicker grip clearance is wanted, the Omnia 1969 and Omnia 1971 modern cabinet pulls are both forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass at 1-1/4 inch projection. Greater projection also means the pull sits farther into aisle or walkway clearance, which matters on a galley run.
12) Can I mix the Schaub Finestrino pull with knobs on the upper doors?
Common approach, and it works visually since the Finestrino is a plain contemporary rectangle. For round knobs, the Orca Bachelor Collection round knob is 1-1/4 inch diameter, and the Blackcomb square knob is 25 mm if you want to echo the pull's squared edges. Knobs mount on a single hole, so they don't need the 160 mm bore spacing the pull requires.
13) Is the Schaub Finestrino pull available through Emtek as well?
Emtek sells Schaub Collection cabinet hardware under its own lines, including the Emtek 8405 Select pulls and the Alexander, Art Deco, and Bar cabinet pulls. Those are separate series with their own profiles and sizes, so they are not substitutes for the Finestrino 451 at 160 mm unless you confirm the center spacing on the specific Emtek model.
14) Does the Schaub 451 come from a wider collection so I can match other cabinet sizes?
It is part of Schaub's Finestrino collection, so the same angled rectangular profile carries across the line for matching drawer banks, base cabinets, and uppers. Ordering within one collection is the simplest way to keep a whole kitchen or a multi-unit build consistent in shape and finish.
15) For a multi-family kitchen package, how do I mix Schaub 451 pulls with knobs on the upper doors?
The Schaub 451 is a contemporary Finestrino pull at 160 mm center to center in Satin Nickel, Polished Chrome, Burnished Bronze, Matte Chrome, and Matte Black. To pair single-hole knobs on upper doors, the Orca Hardware Bachelor Collection offers the CK-15030 round knob and the CK-16030 round ring knob, both 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob at 25 mm for a squarer match to the 451's rectangular profile. Confirm finish naming between brands before standardizing a unit package.
How fast can I get the Schaub 451-BRBZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 451-BRBZ come with a warranty?
Absolutely. The Schaub 451-BRBZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 451-BRBZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schaub 451-BRBZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.