Schaub 441 64mm Center to Center Flared Rectangular Finestrino Cabinet Pull

It takes M4 metric machine screws. That matters because a lot of North American cabinet hardware uses 8-32 threads, and an 8-32 screw will not thread into this pull. If you are swapping out older US-threaded pulls, use the M4 screws and make sure you have lengths that suit your door or drawer front thickness.

The 441 Finestrino is fixed at 64mm. For other bore spacings we carry the Trimco 562 Series drawer pulls in 3-1/2 inch, 4 inch, and 96mm center-to-center, the Trimco 553 Series at 3 inch, and the Omnia 1968/102 at 4 inch. Match the spacing to your existing holes first, then pick the style.

The Schaub 441 Finestrino pull has a zinc base material. If a solid brass body is required, the Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch heavy-duty solid brass bar pull, and the Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing. Note that the Schaub 441 measures 64 mm center to center, so switching to the Omnia 1968/102 changes the hole spacing and requires new boring.

Not as a drop-in. The Schaub 441 is a two-hole pull at 64 mm center to center with M4 screws. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection items are 1-1/4 inch diameter round cabinet knobs and the CK-17025 Blackcomb is a 25 mm square cabinet knob, all single-hole mounts. Choosing a knob means one of the two existing bores will be exposed unless the doors are new or filled.

Projection is 3/4 inch, so the grip sits three quarters of an inch off the face of the door or drawer front. That's enough finger clearance for a gloved hand on a kitchen or vanity front, and shallow enough that it won't catch in a tight galley or a door that swings past an adjacent run.

Overall footprint is 3-1/2 by 2-1/8 inches. Worth checking against narrow rails and small drawer fronts, since the pull is noticeably taller than a plain bar pull of the same 64mm bore spacing. On a slab drawer front there's no issue; on a five-piece front with a narrow center panel, measure before you commit.

Zinc is the base material, with the finish applied over it. If your spec calls for solid brass, look at the Deltana SBP35 Modern Square Bar Pull or the Omnia 1968/102, both of which we list as solid brass. Zinc gives you the same shape and finish range at a different construction.

The Schaub 441 Finestrino pull projects 3/4 inch from the face. For a deeper grip, the Omnia 1969 and Omnia 1971 Modern Cabinet Pulls both have a 1-3/16 inch projection and the Omnia 1970 has a 1-1/4 inch projection, all in forged solid brass. Greater projection gives gloved hands more room but also puts the pull closer to adjacent doors in a tight run.

The Schaub 441 belongs to Schaub's Finestrino collection. Emtek carries several Schaub Collection cabinet knob/pull series that can be mixed across a kitchen: the Emtek 8405 Select, the Emtek Alexander, the Emtek Art Deco, and the Emtek Bar cabinet pull. Those series include knobs as well as pulls, which is useful when upper doors take knobs and drawer banks take pulls.

The Schaub 441 is a contemporary zinc cabinet pull with a 3-1/2 inch by 2-1/8 inch overall footprint. For commercial drawer work, Trimco offers the 553 Series drawer pulls at 3 inch center to center and the 562 Series with 3-1/2 inch, 4 inch, and 96 mm center-to-center options. The 562 Series is the one to look at if the existing bore is 96 mm rather than the 64 mm the Schaub 441 uses.

Five: Satin Nickel, Polished Chrome, Matte Chrome, Matte Black, and Burnished Bronze. If you're standardizing a whole kitchen or a multi-unit build, order the full count in one finish at once so everything comes from the same run.

It's a contemporary style from Schaub's Finestrino collection, a flared rectangular shape rather than a plain round bar. It reads more like a piece of jewelry on the front than a tube pull does, which suits flat-panel and slab doors where the hardware is the only detail. If you want something plainer for the same look, the Emtek Bar Cabinet Pull is a straight bar profile.

Common approach is pulls on drawers and knobs on doors. The 441 is a pull only. For knobs in a comparable contemporary line we carry the Orca Blackcomb square cabinet knob at 25mm and the Orca Bachelor round knob at 1-1/4 inch diameter. Match the finish family across both, since finish names vary by brand.

The Schaub 441 is a flared rectangular pull in zinc with a 3/4 inch projection and a 3-1/2 inch by 2-1/8 inch overall size. The Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Both give a horizontal grip, but the CK-12001 is a bar profile in steel while the 441 is a flared solid rectangular form, and the 441 is offered in Satin Nickel, Polished Chrome, Matte Chrome, Matte Black, and Burnished Bronze.