Schaub 440 32mm Center to Center Flared Square Finestrino Cabinet Pull

Yes, if your doors are drilled on 32mm centers. The Schaub 440 Finestrino pull is a 32mm center-to-center pull, which is the standard European cabinet spacing, so it lines up with existing 32mm bores with no redrilling. Mounting is M4 thread, the standard metric machine screw size for cabinet hardware.

It occupies a 2-3/4 by 2-3/4 inch footprint and stands 3/4 inch off the face. That square footprint is worth checking against narrow rails or slim drawer fronts, since the pull is as tall as it is wide rather than being a thin bar. The 3/4 inch projection leaves finger clearance without pushing far into a walkway.

The Schaub 440 Finestrino pull projects 3/4 inch off the face. For a deeper hand clearance, the Omnia 1970 modern cabinet pull carries a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection in forged solid brass. Those matter on drawers where a glove or a full hand has to get behind the pull.

Five: Satin Nickel (SN), Polished Chrome (PC), Matte Chrome (MC), Matte Black (MB), and Burnished Bronze (BRBZ). For a kitchen or multi-family job where you're mixing pulls and knobs, staying inside the Finestrino collection keeps the finish tone consistent across the run.

Zinc is the base material on the 440 Finestrino pull, finished in the five plated options. If a spec calls specifically for solid brass, look at the Deltana SBP35 Modern Square Bar Pull or the Omnia 1968/102, both listed as solid brass.

The 440 uses M4 machine screws. Standard cabinet hardware screws come in several lengths in that thread, so a thicker or double-panel drawer front just needs a longer M4 screw rather than any change to the pull itself.

The Schaub 440 Finestrino is a 32mm center pull, so it suits doors and smaller drawers. For wider fronts, the Omnia 1968/102 is a modern pull at 4 inch center-to-center, and the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center options. The Trimco 553 Series is a 3 inch center drawer pull.

The 440 mounts on two holes at 32mm centers, which gives a more secure feel and is harder to spin loose over time, but it commits you to a drilled pattern. If your doors are already bored for a single screw, a knob is the simpler swap: the Orca Bachelor Collection round knobs come in 1-1/4 inch diameter and mount on one hole.

The 440 projects 3/4 inch off the door face, which is adequate for a normal grip but tight for heavy gloves. Where more finger room is needed, the Omnia 1970 modern pull carries a 1-1/4 inch projection and the Omnia 1969 and 1971 are each 1-3/16 inch.

The Schaub 440 is a two-hole pull at 32 mm center to center in a flared square contemporary form. For single-hole knobs in a squared contemporary look, the Orca Hardware CK-17025 Blackcomb Collection square cabinet knob is 25 mm across; for round, the Orca CK-15030 Bachelor Collection knob and the CK-16030 round ring knob are both 1-1/4 inch diameter. Knobs take one hole, so the drawer fronts already bored for 32 mm spacing would need to be redrilled or plugged.

They are related lines but not the same item. The Schaub 440 belongs to the Finestrino collection, a flared square pull with a 2-3/4 inch by 2-3/4 inch overall footprint. Emtek carries its own Schaub Collection cabinet knob and pull families, including the Emtek 8405 SELECT series, the Alexander series, the Art Deco series, and the Bar series. If a drawing calls out Finestrino specifically, specify the Schaub 440 rather than an Emtek series number.

That's the intent. The 440 is a contemporary-style flared square pull from Schaub's Finestrino collection, so it reads clean against slab and flat-panel fronts. If you want a square look in a knob instead of a pull, the Orca Hardware Blackcomb Collection square cabinet knob is a 25mm square option.

No. The SDC SP50 is a 50 mm spindle used in door control hardware, not a cabinet pull. The Schaub 440 is a cabinet pull with a 32 mm center-to-center mounting pattern and M4 screws. For a like-for-like cabinet substitute, stay within cabinet pull or knob families such as the Deltana SBP35 or the Omnia 1968/102.