Schaub 312 96mm to 128mm Center to Center Sorrento Cabinet Pull

Yes. The Sorrento 312 pull is a dual-hole pull with 96/128 mm center-to-center spacing, so it drops onto either existing 96mm or 128mm drilling. That makes it useful when a kitchen has a mix of both patterns and you want one pull across all the doors and drawers without redrilling.

The Schaub 312 Sorrento pull has a zinc base material with a 1 inch projection and a 5-3/8 inch overall length. If the specification calls for solid brass instead, the Omnia 1969 modern cabinet pull is forged solid brass with a 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with a 1-1/4 inch projection. Both sit slightly further off the door face than the Schaub 312.

No. The Schaub 312 Sorrento pull is drilled for 96mm or 128mm centers only. For 3 inch center-to-center holes, the Trimco 553 series drawer pull is built to that spacing. For 3-1/2 inch or 4 inch centers, the Trimco 562 series covers both, and the Omnia 1968/102 is a forged solid brass pull on 4 inch centers.

The Schaub 312 Sorrento pull mounts on 96mm or 128mm centers, so it can drop into either hole pattern. The Trimco 562 series drawer pull is offered with a 96mm center-to-center option as well, along with 3-1/2 inch and 4 inch spacings, so it will land on the same 96mm holes without redrilling.

The Schaub 312 Sorrento already sits at a 1 inch projection, which is the tightest among the comparable modern pulls. The Omnia 1969 and Omnia 1971 both project 1-3/16 inch and the Omnia 1970 projects 1-1/4 inch, so all three stand further off the face. If clearance to an adjacent appliance or wall is the constraint, the 312 is the shallower choice.

Overall length is 5-3/8 inches with a 1 inch projection off the face, and the base measures 1 inch. Allow the 1 inch standoff for knuckle clearance, and check the 5-3/8 inch run against narrow drawer fronts or against an adjacent wall or appliance panel where the door swings.

Six finishes: Satin Nickel, Polished Chrome, Black Chrome, Matte Black, Milano Bronze, and Milano Silver. Milano Bronze and Milano Silver are Schaub's own finish names, so if you are matching across a job, order all the openings in the same finish code rather than trying to pair a Milano tone with another maker's bronze or pewter.

Knobs are the common mix-up. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection are 1-1/4 inch diameter round cabinet knobs, and the CK-17025 Blackcomb is a 25mm square knob - all single-screw knobs, so they cannot use the two-hole 96mm or 128mm pattern the Schaub 312 Sorrento pull mounts on. Filling and redrilling would be required to go from the 312 to any of them.

The Schaub 312 Sorrento is a contemporary-style pull with a 1 inch base dimension and 1 inch projection. For a squared bar profile instead, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in heavy-duty solid brass, and the Emtek Bar cabinet pull in the Schaub Collection carries a straight bar form as well. Both change the silhouette rather than the mounting approach.

The Schaub 312 Sorrento pull uses a zinc base material. If a metal with different wear behavior is preferred for heavy use, the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel, and the Deltana SBP35 is a heavy-duty solid brass square bar pull. The Schaub 312 is offered in Satin Nickel, Polished Chrome, Black Chrome, Matte Black, Milano Bronze and Milano Silver if finish matching across the run is the deciding factor.

Sorrento is Schaub's contemporary collection, so it reads clean and modern rather than traditional. For a period or decorative look in the same Schaub design family, Emtek carries the Schaub Collection Art Deco and Alexander cabinet pulls.

The Schaub 312 Sorrento is a contemporary pull. For a more ornamented look from the same Schaub Collection through Emtek, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both offered, and the Emtek 8405 Select cabinet pull serves as a knob or pull in that Select series. These trade the plain Sorrento profile for patterned detailing.