Schaub 316 5-1/16" Center to Center Positano Clear Cabinet Pull

The 316 is only made at 128 mm center to center, so a run of narrow drawers needs a different part. Shorter options ZenSupply carries include the Trimco 553 Series drawer pull at 3 inch center to center and the Trimco 562 Series at 3-1/2 inch, 4 inch, or 96 mm, and the Deltana SBP35 square bar pull at 3-1/2 inch. None of those are Positano, so if visual match across the whole kitchen matters, stay within the Schaub Positano collection rather than mixing families.

The Schaub 316 Positano pull is built on a zinc base material in a contemporary style. If you want a forged solid brass body in a modern cabinet pull, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Omnia 1970 is a forged solid brass modern pull with a 1-1/4 inch projection. Note the spacing difference: the Positano 316 is drilled at 128 mm center to center, so the Omnia 1968/102 at 4 inch centers will not land on the same existing holes.

No, not on the same holes. The Schaub 316 Positano is a two-hole cabinet pull drilled 128 mm center to center. The Orca Hardware CK-15030 Bachelor Collection round cabinet knob and the CK-16030 Bachelor Collection round ring knob are both 1-1/4 inch diameter knobs, and the CK-17025 Blackcomb Collection square knob is 25 mm, all single-point knobs. Swapping to any of them leaves one of the original two bores exposed on the door or drawer face, so plan on new fronts or a backplate.

The Positano 316 takes M4 metric machine screws, the standard thread for cabinet pulls. Stock screws suit a typical 3/4 inch front. If you are pulling through a thick applied front, a slab door with a backer, or a panel over 3/4 inch, order longer M4 screws separately; the thread size is the only thing you need to match.

Projection is 1 inch off the face of the door, so you get roughly an inch of hand room behind the grip. That is enough for a full-finger grab on a drawer but worth checking on inside corners and next to appliance panels, where an inch of stick-out can catch a neighbouring door.

Six combinations, pairing a metal finish with a glass tone: Satin Nickel with Clear or Smoke, Polished Chrome with Clear or Smoke, and Signature Satin Brass with Clear or Smoke. The Clear option reads brighter and disappears against light fronts; Smoke is a grey-tinted body that holds its own on dark or walnut cabinetry. If you are standardizing a whole kitchen or a unit fleet, pick one metal finish and one tone and stay with it, since the metal tones will not cross-match between Schaub collections.

No, the Positano 316 is a contemporary pull with a glass-toned body offered in Clear or Smoke, not a straight metal bar. For a true bar pull, ZenSupply carries the Emtek Bar Cabinet Pull from the Schaub Collection, the Orca Hardware CK-12001 T-pull bar with a 2 inch bar width in satin nickel steel, and the Deltana SBP35 modern square bar pull. Those read as minimal tube or square stock; the Positano is a decorative piece.

Emtek carries the Schaub Collection under its own part numbers, so a Positano-style contemporary pull has near neighbors there. The Emtek 8405 is a Select cabinet pull in the Schaub Collection, and Emtek also lists the Bar, Alexander, and Art Deco cabinet pulls in the Schaub Collection, all catalogued as cabinet knob/pull function. If your millwork package is written around Emtek, those keep you inside one brand line while staying in Schaub design language.

The Schaub 316 Positano is a contemporary pull with a decorative clear or smoke accent over a zinc base, which reads as a design-forward piece. For a plainer bar profile that takes abuse across a lot of units, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull. Both drop the accent element and give you a single continuous grip surface with nothing to discolor.

Plan on using whatever screws ship with the replacement instead. The Schaub 316 Positano uses M-4 metric thread hardware, consistent with its 128 mm metric center-to-center spacing. The Trimco 562 Series drawer pulls include a 96 mm metric center-to-center option, so they are drilled on a metric template, but thread size is a separate question from hole spacing and should be confirmed against the screws packed with the pull. On inch-spaced pulls such as the Trimco 553 Series at 3 inch center to center, treat mounting hardware as non-interchangeable.

Yes. Schaub publishes a Proposition 65 warning for the Positano pull, which matters if you are shipping into California or specifying for a California project that requires the disclosure on file. The warning and Schaub's product stewardship statement are linked from the product information.

They overlap. ZenSupply carries several Emtek pulls badged as the Schaub Collection, including the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pull. Those are separate designs from the Positano 316, so mixing them on one run means matching by finish name rather than assuming the shapes coordinate. If a whole kitchen has to read as one set, order all the pulls from a single series.