Schaub 320 5-1/16" Center to Center Positano Arch Clear Cabinet Pull

It uses M4 machine screws, the metric thread standard on European style pulls rather than the 8-32 used on many domestic pulls. Order longer M4 screws if your drawer fronts are thicker than standard, and note that an 8-32 screw from an old pull will not thread into it.

The Schaub 320 Positano is a zinc-base contemporary pull with 128 mm center-to-center spacing and 1 inch projection. If the specification calls for solid brass instead, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, and the Omnia 1970 is a forged solid brass modern pull with 1-1/4 inch projection. Note the center spacing differs from the Schaub 320, so existing bore holes would need to be redrilled.

The Schaub 320 Positano measures 5-3/8 inches overall on 128 mm centers, which is more than many narrow drawer fronts will take. For a shorter run, the Deltana SBP35 is a modern square bar pull at 3-1/2 inches, and the Trimco 553 series drawer pulls are 3 inch center-to-center. The Trimco 562 series offers 3-1/2 inch, 4 inch, and 96 mm center-to-center options if you want to step down in one step rather than all the way to 3 inches.

Projection is 1 inch, with a 5-3/8 inch overall length and a 1/2 inch base. That inch of clearance is enough for a gloved hand on kitchen and vanity fronts, and it is worth checking against any adjacent wall or appliance return where a drawer front sits close to a corner.

Six combinations, pairing a metal finish with a clear or smoke acrylic arch: Satin Nickel/Clear, Satin Nickel/Smoke, Polished Chrome/Clear, Polished Chrome/Smoke, Signature Satin Brass/Clear, and Signature Satin Brass/Smoke. Clear reads lighter against a painted door, smoke reads darker and hides fingerprints better.

For shorter centers in a modern look, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96 mm centers, and the Trimco 553 Series is 3 inch centers. The Omnia 1968/102 is a 4 inch center modern pull in forged solid brass. None of these will match the Positano acrylic arch visually, so if you want the same look throughout, stay within the Positano collection.

Yes. Emtek offers the Schaub Collection, which includes the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull. These are cataloged as cabinet knob/pull products in their own series, so styling and sizing differ from the Schaub 320 Positano, which is a contemporary Positano collection pull.

A knob is a single-hole item and will not land on the two-hole pattern the Schaub 320 uses at 128 mm centers. Orca Hardware knobs such as the Bachelor Collection CK-15030 round knob at 1-1/4 inch diameter, the CK-16030 round ring knob at 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob at 25 mm are cataloged as cabinet knobs, so switching to any of them means filling and redrilling the door for a single center bore.

The Schaub 320 Positano projects 1 inch off the face. Among comparable modern pulls, the Omnia 1969 and Omnia 1971 both project 1-3/16 inches and the Omnia 1970 projects 1-1/4 inches, all in forged solid brass. If your inset doors or adjacent appliance panels need more knuckle room, those Omnia profiles stand further off the face than the Schaub 320.

It is a cabinet pull, sized for door and drawer fronts at 128 mm centers. Appliance panels normally need a much longer pull with wider centers, so this is not the part for a refrigerator or dishwasher panel.

Schaub lists the Positano style as contemporary. The clear or smoke acrylic arch on a metal base reads modern, though satin brass with a smoke arch softens it enough for a transitional room. For a more traditional run, the Emtek Art Deco or Alexander cabinet pulls from the Schaub collection are the other direction.

No. The SDC SP50 is a 50 mm spindle used in door control applications, not cabinet hardware. The Schaub 320 Positano is a cabinet pull that mounts with M4 screws through the door or drawer front, so an SP50 spindle has no role in it. For a like-for-like cabinet pull, stay within the cabinet pull group such as the Omnia 1968/102 or the Trimco 562 series.