Schaub 472 Haniburton Transiti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.00
$28.05
Schaub 472 2" Haniburton Cabinet Finger Pull

Schaub 472 Haniburton Transitional Cabinet Finger Pull, 2" Knob Diameter, Solid Brass

(No reviews yet) Write a Review

Model: 472-26
From the Haniburton Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.00
$28.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 472 Haniburton Transitional Cabinet Finger Pull, 2" Knob Diameter, Solid Brass

The Schaub 472 Haniburton Transitional Cabinet Finger Pull offers a clean, streamlined profile for cabinet doors and drawers in kitchens, bathrooms, and other cabinetry applications. Finished in solid brass, this cabinet pull features a 2" knob diameter, a 1-3/8" projection, and a 5/8" base dimension, delivering a comfortable, secure grip point for everyday use. Part of the Haniburton collection, this finger pull reflects a transitional design aesthetic suited to a range of cabinetry styles. The pull mounts using an 8/32 x 1 screw size for proper installation into prepared cabinet surfaces.

Key Features

  • Knob Diameter: Measures 2" across for a comfortable, secure fingertip grip on cabinet doors and drawers.
  • Projection: Extends 1-3/8" from the cabinet surface, providing adequate clearance for easy operation.
  • Base Dimension: A 5/8" base dimension supports a streamlined, low profile mounting footprint.
  • Solid Brass Construction: Built from solid brass base material for durable, long lasting cabinet hardware performance.
  • Haniburton Collection Design: Part of the Haniburton collection, finished in a transitional style that complements a range of cabinetry designs.
  • Cabinet Pull Function: Designed specifically as a cabinet finger pull for everyday kitchen, bath, and cabinetry applications.
  • Thread / Screw Size: Mounts using an 8/32 x 1 screw size for proper installation into prepared cabinet surfaces.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 8/32 x 1"
  • Overall: 2"
  • Knob Diameter: 2"
  • Product Dimension: 5/8"
  • Product Projection: 1-3/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodeling Projects
  • Custom Furniture Design
  • Commercial Cabinetry Installations
  • Retail Display Fixtures

Why Schaub 472?

Schaub cabinet hardware is built from solid brass for lasting durability, with precise dimensions like the 2" knob diameter and 1-3/8" projection ensuring consistent fit and function across cabinetry projects. The Haniburton collection's transitional styling offers dependable, professional grade cabinet hardware for everyday residential and commercial use.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Haniburton
Product Type:
Cabinet Pull
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
8/32 x 1"
Overall:
2"
Knob Diameter:
2"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-3/8"
Product Style:
Transitional
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
Department:
Door Hardware

Schaub 472-26 – Frequently Asked Questions

1) What screw comes with the Schaub 472 Haniburton finger pull, and will it work on a 3/4 inch cabinet door?
The Haniburton 472 uses an 8/32 x 1 inch machine screw, which is the standard single-hole cabinet screw length for 3/4 inch door and drawer fronts. On thicker fronts or fronts with an applied panel you'll need a longer 8/32 screw, since the thread size stays the same.
2) Is the Schaub 472 a single-hole mount or does it need two holes drilled?
Single hole. The 472 Haniburton is a finger pull mounted on one 8/32 machine screw, so there is no center-to-center spacing to match. That makes it a straightforward swap for an existing knob on a single bore, no new drilling.
3) Can I use the Schaub 472 in place of the existing knobs on my drawers?
Yes, if the drawers currently run single-knob mounting. The 472 takes one 8/32 screw on a single bore, the same prep a standard cabinet knob uses, so the existing holes carry over. If your drawers are on two-hole pulls, you'd need a two-hole pull with matching center-to-center instead, such as the Trimco 553 at 3 inch ctc or the Trimco 562 in 3-1/2 inch, 4 inch, and 96mm.
4) What is the closest alternative to the Schaub 472 Haniburton finger pull if I want the same Schaub styling from Emtek?
Emtek sells the Schaub Collection under its own SELECT program - the Emtek 8405 Select cabinet pull is part of that Schaub Collection and is catalogued as a cabinet knob/pull. The Schaub 472 Haniburton is a 2 inch finger pull in solid brass with a 1-3/8 inch projection and a 5/8 inch base, mounting on an 8/32 x 1 inch screw. If you want the Schaub design language but a different profile than the Haniburton finger pull, the Emtek Alexander and Emtek Art Deco cabinet pulls are also Schaub Collection pieces.
5) I need a wider grip than a 2 inch finger pull for a heavy drawer - what should I use instead?
The Schaub 472 Haniburton is a 2 inch single-point finger pull, so the hand grips one small body rather than a span. For a wider two-hole grip in the same solid brass family, the Omnia 1968/102 is a forged solid brass cabinet pull on 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inches. Both give you a bar to wrap a full hand around instead of a fingertip pull.
6) I have limited clearance in front of the cabinet face - which pull projects less than the Schaub 472?
The Schaub 472 Haniburton projects 1-3/8 inch off the face. If you need a shallower stand-off in forged solid brass, the Omnia 1969 and Omnia 1971 both project 1-3/16 inch and the Omnia 1970 projects 1-1/4 inch. Those are two-hole modern pulls rather than a single-screw finger pull, so confirm the drilling before you specify.
7) How far does the Schaub Haniburton 472 stick out from the cabinet door?
Projection is 1-3/8 inches off the face of the door, with a 5/8 inch base at the mounting point. In a tight galley or next to an appliance door swing, that 1-3/8 inch stand-off is the number to check for knuckle clearance.
8) What finishes does the Schaub 472 Haniburton pull come in?
Six finishes: Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass, and Unlacquered Brass. Unlacquered Brass is a living finish that will patina with handling, so if you need the whole kitchen to stay uniform over time, one of the plated finishes is the safer specification.
9) Is the Schaub 472 solid brass or plated zinc?
Solid brass base material, not zinc die cast. That matters on a finger pull that gets hooked every day and in kitchens or baths where plated pot metal tends to pit at the screw boss.
10) I need matching bar pulls for the drawers to go with the Schaub 472 knobs. What pairs with it?
The common approach is single-point pulls on the doors and a bar pull on wide drawers. Emtek sells the Schaub Collection under its own SELECT line, including the Emtek Bar Cabinet Pull and the Emtek 8405 Select cabinet pulls, which is the closest family match. For a heavier squared profile, the Deltana SBP35 Modern Square Bar Pull at 3-1/2 inches is also solid brass.
11) Is the Trimco 553 drawer pull a substitute for the Schaub 472?
They mount differently. The Trimco 553 series drawer pull is built on 3 inch center-to-center spacing, so it is a two-screw pull that needs a drilled pair of holes; the Trimco 562 series runs 3-1/2 inch, 4 inch, and 96mm center-to-center. The Schaub 472 Haniburton is a 2 inch finger pull taking a single 8/32 x 1 inch screw. Swapping to a Trimco means redrilling the door or drawer face, so it is a replacement choice rather than a drop-in.
12) What is a simpler single-screw alternative if I do not need the transitional Haniburton look?
The Schaub 472 Haniburton is a transitional-style solid brass finger pull with a 2 inch knob diameter. For a plainer single-point piece, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob is 1-1/4 inch in diameter, the CK-16030 is the round ring version at the same 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection knob is square at 25mm. All three are knobs rather than finger pulls, so the grip shape changes along with the diameter.
13) Will the Orca CK-12001 T-pull bar match a run of Schaub 472 pulls in satin nickel?
The finish name lines up but the material and form do not. The Orca CK-12001 is a T-pull bar with a 2 inch bar width made of steel in satin nickel; the Schaub 472 Haniburton is solid brass and is offered in satin nickel along with polished chrome, matte black, polished nickel, satin brass, and unlacquered brass. Plated steel and plated brass can read differently side by side, so if the two are on adjacent doors, sample them together before committing the run.
14) What should I look at instead of the Schaub 472 if the design calls for a straight bar pull?
The Haniburton 472 is a rounded 2 inch finger pull with a 5/8 inch base. For a straight bar profile, the Emtek Bar cabinet pull is part of the same Schaub Collection Emtek carries, the Deltana SBP35 is a modern square bar pull at 3-1/2 inches in heavy-duty solid brass, and the Orca CK-12001 is a steel T-pull bar with a 2 inch bar width. The Emtek Bar keeps you inside the Schaub design family; the other two are separate lines.
15) What style is the Haniburton collection, and what else works if I need a plainer modern look?
Haniburton is a transitional design, so it reads between traditional and contemporary and works in shaker or inset cabinetry. If the job calls for something strictly modern, the Omnia 1969 and Omnia 1971 are forged solid brass modern pulls with a 1-3/16 inch projection, and the Omnia 1970 projects 1-1/4 inches.
How fast can I get the Schaub 472-26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 472-26 come with a warranty?
Absolutely. The Schaub 472-26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 472-26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 472-26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!