Schaub 480 Haniburton Cabinet ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$128.00
$74.04
Schaub 480 10" Center to Center Haniburton Cabinet Pull

Schaub 480 Haniburton Cabinet Pull, 10" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 480-PN
From the Haniburton Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$128.00
$74.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 480 Haniburton Cabinet Pull, 10" Center to Center, Solid Brass

The Schaub 480 Haniburton Cabinet Pull is a transitional cabinet pull designed to bring understated, classic style to kitchen and bath cabinetry. Built from solid brass, this pull offers a 10" center to center mounting span, a 10-5/8" overall length, a 5/8" base dimension, and a 1-1/2" projection that together provide a comfortable, secure grip. As part of the Haniburton collection, it is engineered to coordinate with matching knobs and pulls for a cohesive cabinetry look throughout the kitchen or bath.

Key Features

  • Center to Center Spacing: A 10" center to center mounting span simplifies installation on standard cabinet drawers and doors prepared for this hole spacing.
  • Overall Length: The pull measures 10-5/8" overall, giving it a substantial presence on larger drawer fronts and cabinet doors.
  • Base Dimension: A 5/8" base dimension provides a stable mounting footprint where the pull meets the cabinet surface.
  • Comfortable Projection: The 1-1/2" projection offers ample clearance behind the pull for a secure, comfortable grip.
  • Solid Brass Construction: Crafted from solid brass, this pull is built to withstand the daily wear of frequent cabinet use while maintaining its appearance over time.
  • Transitional Design: The Haniburton collection's transitional style blends traditional silhouettes with clean, simplified lines for versatile decor compatibility.
  • Mounting Hardware Specification: Designed for use with 1/4 x 20 x1 fasteners as specified for this pull.
  • Functional Cabinet Pull: Serves as a dedicated cabinet pull for drawers and doors throughout kitchen, bath, and other cabinetry applications.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 1/4 x 20 x1
  • Overall: 10-5/8"
  • Product Dimension: 5/8"
  • Product Projection: 1-1/2"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 10"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodeling Projects
  • Custom Cabinetry Installations
  • Furniture and Built-In Storage
  • Multi-Family Residential Properties

Why Schaub 480?

The Schaub 480 Haniburton Cabinet Pull pairs solid brass construction with a transitional silhouette for dependable, attractive cabinet hardware that suits a wide range of kitchen and bath styles. Its 10" center to center spacing, 10-5/8" overall length, and 1-1/2" projection combine for a pull that is both practical to install and comfortable to use every day.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Haniburton
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
1/4 x 20 x1
Overall:
10-5/8"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-1/2"
Product Style:
Transitional
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
10"
Department:
Door Hardware

Schaub 480-PN – Frequently Asked Questions

1) How much clearance do I need behind a Schaub Haniburton 480 pull for knuckles?
Projection is 1-1/2 inches, which is the distance the grip stands off the face of the door or drawer. That is a full-hand grip, more than most low-profile bar pulls, so check it against anything mounted alongside: an adjacent appliance panel, a return wall, or a door that swings into the pull. On a 10 inch centers pull this is typically going on a large drawer bank or a tall pantry door where the extra standoff is what makes it usable.
2) What screws come with the Schaub 480 pull and will they reach through a thick drawer front?
The Haniburton 480 uses 1/4-20 x 1 inch machine screws. A 1 inch screw covers a standard 3/4 inch front with thread left for the post. If you are mounting through a thicker slab front, an applied panel, or a drawer box with a false front stacked on it, you will need longer 1/4-20 screws, which are a standard hardware-store thread.
3) What is a close alternative to the Schaub 480 Haniburton pull if the cabinet run needs a different look but the same solid brass build?
The Omnia 1968/102 is a modern cabinet pull built in forged solid brass with 4 inch center-to-center spacing, while the Schaub 480 Haniburton is a transitional solid brass pull at 10 inch center to center. Both are solid brass cabinet pulls; the difference is the styling and the mounting spread, so the 1968/102 suits a run drilled on 4 inch centers and the 480 suits a run drilled at 10 inches.
4) The Haniburton pull projects too far off the door face for a tight galley. What pulls sit closer to the front?
The Schaub 480 Haniburton carries a 1-1/2 inch projection. The Omnia 1970 is a forged solid brass modern cabinet pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are both forged solid brass modern pulls at 1-3/16 inch projection. In a narrow aisle where a hip or a cart clears the door face by very little, those three stand off the door less than the 480 does.
5) What should be ordered instead of the Schaub 480 for small drawers that cannot take a 10 inch spread?
The Schaub 480 Haniburton is drilled at 10 inch center to center, which needs a wide drawer face. For narrow drawers, the Trimco 553 series drawer pull is a 3 inch center-to-center pull, the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options, and the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inches. Those short spreads land inside the width of a typical utility or spice drawer.
6) What finishes does the Schaub Haniburton 480 cabinet pull come in?
Six finishes: Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass, and Unlacquered Brass. Unlacquered Brass is the one to think twice about on a fleet job. It has no protective coating and will darken and patina with handling, so it will not stay matched to a later replacement pull unless you let that one age too. If you need every unit in a building to look identical for years, use Satin Brass instead.
7) Is the Schaub 480 Haniburton pull solid brass or plated zinc?
Base material is solid brass. That matters on a 10 inch pull more than a small one, because a long span on a heavy drawer takes leverage every time it is opened, and cast zinc pulls are where you see snapped posts on high-traffic cabinetry. Solid brass also means the Unlacquered Brass version is brass all the way through rather than a coating that can wear off a substrate.
8) What is the difference between the Schaub Haniburton pull and a plain bar pull?
The Haniburton is a transitional design in solid brass with a 1-1/2 inch projection, so it stands off further and has more shape to it than a straight tube. If you want the stripped-down look instead, the Emtek Bar Cabinet Pull and the Deltana SBP35 Modern Square Bar Pull are both bar profiles, the Deltana in solid brass at 3-1/2 inches. The Omnia 1970 is another modern forged solid brass option with a 1-1/4 inch projection, slightly tighter to the front than the Haniburton.
9) I need a shorter pull to match the Haniburton on my cabinet doors, what should I look at?
The 480 is fixed at 10 inch centers, so for the doors you need a different part. Trimco's 553 Series drawer pulls run 3 inch centers and the 562 Series comes in 3-1/2 inch, 4 inch, and 96mm centers. Omnia's 1968/102 is a forged solid brass modern pull at 4 inch centers. None of those are the Haniburton profile, so if you want an exact family match across sizes, look at the Haniburton collection in other lengths rather than mixing brands.
10) Can an Emtek Schaub Collection pull be used alongside the Schaub 480 Haniburton on the same kitchen?
Emtek sells several cabinet pulls under its Schaub Collection, including the Emtek 8405 Select in the Emtek SELECT series, the Emtek Alexander, the Emtek Art Deco, and the Emtek Bar cabinet pull. All are cataloged with a cabinet knob/pull function, the same job the Schaub 480 Haniburton performs. They are separate series from the Haniburton collection, so mixing them means mixing designs rather than continuing one family across a kitchen.
11) Is there a steel appliance-style bar pull to use where a brass Haniburton pull is not wanted?
The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, made of steel in satin nickel, cataloged with a pull function. The Schaub 480 Haniburton is a solid brass transitional pull, and satin nickel is one of its finishes along with polished chrome, matte black, polished nickel, satin brass, and unlacquered brass. Both give a horizontal grip; the CK-12001 is a steel bar and the 480 is brass with a Haniburton profile.
12) For a run of full-height pantry and appliance doors, does the Schaub 480 or an Omnia modern pull give the longer grip?
The Schaub 480 Haniburton spans 10 inch center to center with a 10-5/8 inch overall length, a full-hand grip sized for tall doors. The Omnia 1968/102 modern pull is spaced at 4 inch center to center. Where the door face is tall and a two-hand or gloved pull matters, the 480 gives the longer bar; the 1968/102 fits a run already bored at 4 inches.
13) How thick is the bar on the Schaub 480 Haniburton pull?
Base dimension on the Haniburton 480 is 5/8 inch. Combined with the 1-1/2 inch projection, that is the footprint sitting against the cabinet front, so it is worth checking against narrow rails and stiles on a shaker or framed door where a wide base can crowd the panel edge.
How fast can I get the Schaub 480-PN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 480-PN come with a warranty?
Absolutely. The Schaub 480-PN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 480-PN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 480-PN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!