Schaub 481 12" Center to Center Haniburton Cabinet Pull

Emtek carries the Schaub Collection under its SELECT program, and the Emtek 8405 Select cabinet pull is part of that collection. It is catalogued as a cabinet knob/pull in the Emtek SELECT series, so it is the natural route to Schaub styling when the rest of the job is being specified in Emtek. The Schaub 481 itself is the Haniburton collection in solid brass, 12 inch center to center with a 12-5/8 inch overall length and 1-1/2 inch projection, so if you need that exact appliance-length span, stay with the 481.

The Schaub 481 Haniburton is fixed at 12 inch center to center with a 12-5/8 inch overall length, so it needs a wide drawer or an appliance front. For short drawer fronts, the Trimco 553 series drawer pull is a 3 inch center to center pull, and the Trimco 562 series offers 3-1/2 inch, 4 inch and 96mm center to center options. The Deltana SBP35 modern square bar pull is another short option at 3-1/2 inch in solid brass. Any of those will land on a standard drawer front where the 481 will not.

Projection is 1-1/2 inches, measured from the cabinet face to the back of the grip. That is a generous hand clearance, which is why this size gets used on appliance panels and tall pantry doors. In a tight galley or where a drawer bank sits opposite a wall, check the swing clearance before you commit, because 1-1/2 inches is deeper than many low-profile bar pulls.

Six finishes: Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass, and Unlacquered Brass. Unlacquered Brass is the one to think twice about on a spec job, since it has no protective coating and will patina with handling. If a facility or a rental unit needs everything to look the same in five years, one of the plated finishes holds its appearance better.

Yes. Emtek sells the Schaub Collection under its own SELECT line, including the 8405 Select cabinet pulls and the Alexander, Art Deco, and Bar cabinet pulls. If you are running Emtek door hardware and want the cabinet program to read as one family, that collection is the bridge.

The Haniburton 481 only covers the 12 inch center to center size, so the small drawers need a separate part. Within the comparable range we carry, the Trimco 553 Series drawer pulls run 3 inch center to center and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm spacings, and the Deltana SBP35 is a 3-1/2 inch heavy-duty solid brass square bar pull. If matching the Haniburton profile exactly matters, stay inside the Schaub Haniburton collection and pick the shorter lengths there.

The Schaub 481 Haniburton is a transitional pull. For a strictly modern program, the Omnia 1968/102 is a modern cabinet pull in forged solid brass at 4 inch center to center, and the Omnia 1969, 1970 and 1971 are modern forged solid brass pulls as well. Emtek's Bar cabinet pull in the Schaub Collection is another modern-leaning shape if you want to stay within Schaub styling.

The Schaub 481 Haniburton projects 1-1/2 inch off the face in solid brass. If you need the hand to sit closer to the door, the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 are forged solid brass at 1-3/16 inch projection. All three keep the forged brass body while pulling the grip back toward the face, which matters where a door swings past an adjacent wall or appliance.

They are not interchangeable. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width, built in steel and supplied in satin nickel. The Schaub 481 Haniburton is a solid brass pull with a 12 inch center to center span and a 1-1/2 inch projection, offered in Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass and Unlacquered Brass. If the finish schedule calls for brass base material or a finish outside satin nickel, the Orca will not cover it.

On small doors a knob is a common swap, and there are several to choose from: the Orca Hardware Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the Bachelor Collection round ring knob also at 1-1/4 inch diameter, and the Blackcomb Collection square knob at 25mm diameter. Note these are single-hole knobs, while the Schaub 481 Haniburton is a two-hole pull bored at 12 inch center to center, so the door drilling is different and the two do not share a template.

The Schaub 481 Haniburton reads transitional. Where the millwork calls for something more ornamental, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both offered in the Schaub Collection as cabinet knob/pull hardware, so you can move to a decorative profile without leaving the Schaub design family across the job.