Schaub 474 Haniburton Cabinet ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.00
$40.39
Schaub 474 4" Center to Center Haniburton Cabinet Pull

Schaub 474 Haniburton Cabinet Pull, 4" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 474-15
From the Haniburton Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.00
$40.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 474 Haniburton Cabinet Pull, 4" Center to Center, Solid Brass

The Schaub 474 Haniburton Cabinet Pull brings transitional style to kitchen and bath cabinetry with a 4" center to center mounting dimension and a 4-5/8" overall length. Crafted from solid brass, this pull extends 1-1/4" from the mounting surface and features a 5/8" base dimension for a substantial, balanced feel in the hand. Part of the Haniburton collection, it pairs clean transitional lines with durable brass construction suited to everyday cabinet use in kitchens, bathrooms, and other living spaces. The 8/32 x 1" thread and screw specification supports straightforward mounting to standard cabinet door and drawer fronts.

Key Features

  • Center to Center Spacing: 4" center to center mounting provides straightforward installation on standard cabinet drilling patterns commonly found in kitchen and bath cabinetry.
  • Overall Length: 4-5/8" overall length paired with a 5/8" base dimension creates a proportionate, substantial appearance on doors and drawers.
  • Projection: 1-1/4" projection from the mounting surface provides a comfortable, functional grip for everyday cabinet use.
  • Solid Brass Construction: Made from solid brass for lasting durability and a substantial, quality feel in daily use.
  • Thread / Screw Size: 8/32 x 1" mounting specification supports compatible installation hardware for this pull.
  • Transitional Style: Part of the Haniburton collection, blending traditional and contemporary design elements for versatile decor pairing.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 4"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Millwork
  • Closet and Storage Systems

Why Schaub Haniburton?

Schaub Haniburton cabinet hardware is crafted from solid brass for lasting durability and a substantial feel in everyday use. With precise 4" center to center spacing, a 4-5/8" overall length, and a 1-1/4" projection, this pull delivers a consistent fit and comfortable handling for transitional kitchen and bath cabinetry designs. The Haniburton collection offers a dependable choice for remodeling projects and new cabinetry installations alike.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Haniburton
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
8/32 x 1"
Overall:
4-5/8"
Product Function:
Cabinet Pull
Product Dimension:
5/8"
Product Projection:
1-1/4"
Product Style:
Transitional
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
4"
Department:
Door Hardware

Schaub 474-15 – Frequently Asked Questions

1) Will the Schaub 474 Haniburton pull drop into my existing 4 inch center-to-center holes?
Yes. The Haniburton 474 is drilled on 4 inch centers, so it lands on the standard 4 inch bore spacing already in most doors and drawer fronts. Overall length is 4-5/8 inches, meaning it only adds about 5/8 inch past the mounting holes, so it won't overhang much more than whatever 4 inch pull you are taking off.
2) What screws come with the Schaub Haniburton cabinet pull, and will they work on a thick shaker drawer front?
It takes 8/32 thread machine screws at 1 inch long. That length suits typical 3/4 inch fronts with a little thread left over. If you are mounting to a thicker slab, a five-piece front with an applied panel, or a door with an added skin, you will need longer 8/32 screws, which are a standard stock item.
3) My existing cabinet holes are 3-1/2 inch on center, not 4 inch - what pull should I order instead of the Schaub 474?
The Schaub 474 Haniburton is fixed at 4 inch center-to-center, so it will not land on 3-1/2 inch holes without redrilling. For that spacing, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Trimco 562 series drawer pull is offered in a 3-1/2 inch center-to-center option alongside 4 inch and 96mm. If your holes are 3 inch on center, the Trimco 553 series is a 3 inch center-to-center drawer pull.
4) What is another 4 inch center-to-center solid brass cabinet pull that drops into the same holes as the Schaub 474 Haniburton?
The Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, so it lands on the same two drilled holes as the Schaub 474 Haniburton, which is also 4 inch center-to-center in solid brass. The visual difference is the styling: the Haniburton is a transitional design with a 4-5/8 inch overall length and a 1-1/4 inch projection, while the 1968/102 is a modern profile.
5) I need the same 1-1/4 inch projection as the Schaub 474 but in a modern look - what else matches that reach off the door?
The Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, the same standoff from the door face as the Schaub 474 Haniburton. If you want slightly less reach, the Omnia 1969 and Omnia 1971 are both forged solid brass at a 1-3/16 inch projection. Projection matters where cabinet doors sit close to an adjacent wall, appliance, or an inside corner.
6) How much hand clearance does the Schaub 474 pull give behind the grip?
Projection is 1-1/4 inches off the face of the door, which is enough to get a full hand behind it rather than fingertips. The post base measures 5/8 inch. That projection is worth checking if the cabinet sits in a tight galley run or next to a door swing where a deep pull gets caught.
7) What finishes does the Schaub Haniburton 474 pull come in for matching a whole kitchen?
Six finishes: Satin Nickel, Polished Nickel, Polished Chrome, Satin Brass, Matte Black, and Unlacquered Brass. Unlacquered Brass is a living finish, it will patina with handling, so if you are specifying a full run and want everything to stay uniform, pick one of the lacquered or plated options instead.
8) Is the Schaub 474 solid brass or plated zinc?
Solid brass base material, not zinc die cast. That matters on a rental turnover or a hospitality property where pulls get gripped thousands of times, brass threads hold up to being taken off and reinstalled better than pot metal.
9) Is the Emtek 8405 Select cabinet pull the same thing as the Schaub 474 Haniburton?
No. Both sit in the Schaub design family - the Emtek 8405 is part of the Emtek SELECT series in the Schaub Collection - but the 8405 is catalogued as a cabinet knob/pull rather than the fixed Haniburton pull. The Schaub 474 is a single cabinet pull in the Haniburton collection at 4 inch center-to-center, 4-5/8 inch overall, solid brass. Order the 474 if you need that exact hole spacing and profile.
10) What are the other Schaub Collection pull styles from Emtek if the Haniburton profile is not the look I want?
Within the Schaub Collection sold under Emtek, the Alexander, Art Deco, and Bar series are all cabinet knob/pull designs, so you can shift the visual style while staying in the same design family as the Schaub 474 Haniburton. The 474 itself is the transitional Haniburton profile in solid brass.
11) Can I use a cabinet knob in place of the Schaub 474 pull on the same doors?
A knob mounts on a single hole, so it is not a drop-in for the Schaub 474, which is a two-hole pull at 4 inch center-to-center with 8/32 x 1 inch screws. If you are drilling fresh doors and want knobs, the Orca Hardware CK-15030 and CK-16030 Bachelor Collection knobs are 1-1/4 inch diameter round designs, and the CK-17025 Blackcomb is a 25mm square knob. Mixing knobs on doors and 474 pulls on drawers is a common way to keep one hardware family.
12) What style is the Haniburton collection, and will it work in a traditional kitchen?
Haniburton is classed as transitional, so it sits between traditional and modern and generally reads correctly against both shaker and flat-panel doors. If you want something squarely modern instead, the Omnia 1968/102 is a modern forged solid brass pull also on 4 inch centers.
13) Can I use the Schaub 474 on both drawers and cabinet doors?
Yes, it's a straight two-post cabinet pull, so it mounts the same either way. At 4-5/8 inches overall it suits standard drawer fronts and door stiles. On narrow drawers you'd typically run it horizontally centered, and vertically on doors near the strike stile.
14) Is there a steel alternative to the Schaub 474 for high-traffic commercial cabinetry?
The Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel, a different construction from the Schaub 474 Haniburton, which is solid brass. The 474 is offered in Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass, and Unlacquered Brass, so brass finishes including a living unlacquered finish are only on the Schaub side.
How fast can I get the Schaub 474-15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 474-15 come with a warranty?
Absolutely. The Schaub 474-15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 474-15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 474-15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!