Schaub 479 Haniburton Applianc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$481.00
$305.55
Schaub 479 15" Center to Center Haniburton Appliance Pull

Schaub 479 Haniburton Appliance Pull, 15" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 479-PN
From the Haniburton Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$481.00
$305.55
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 479 Haniburton Appliance Pull, 15" Center to Center, Solid Brass

The Schaub 479 Haniburton Appliance Pull, 15" Center to Center, Solid Brass brings a Transitional design from the Haniburton collection to cabinet and appliance doors. Built with a 15" center to center mounting spacing, a 16" overall length, a 1-7/8 projection from the mounting surface, and a 1" base dimension, this appliance pull is constructed from solid brass for lasting daily performance. The thread and screw size for this pull is 1/4 x 20 x1, allowing proper alignment with the specified mounting spacing.

Key Features

  • Center to Center Spacing: 15" center to center mounting spacing provides accurate hole alignment during installation.
  • Overall Length: 16" overall length suited for appliance panels and cabinet door applications.
  • Projection: 1-7/8 projection from the mounting surface allows for a comfortable, secure grip.
  • Base Dimension: 1" base dimension supports a stable mounting post connection.
  • Solid Brass Construction: Solid brass base material delivers durability for frequent daily use.
  • Thread / Screw Size: 1/4 x 20 x1 mounting thread specification for proper fastener fit.
  • Transitional Style: Haniburton collection design brings a Transitional aesthetic that complements both cabinets and appliances.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 16"
  • Product Dimension: 1"
  • Product Projection: 1-7/8"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 15"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry and Drawers
  • Refrigerator and Appliance Panels
  • Commercial Kitchen Installations
  • Residential Remodeling Projects
  • Custom Cabinetry Workshops
  • Multi-Family Residential Properties

Why Schaub 479?

Schaub Haniburton appliance pulls combine solid brass construction with a Transitional design for dependable, long lasting performance on cabinets and appliances. Precision 15" center to center spacing paired with a 1-7/8 projection makes installation straightforward while providing a comfortable, consistent grip for everyday use across kitchen and appliance hardware applications.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Haniburton
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
1/4 x 20 x1
Overall:
16"
Product Function:
Appliance Pull
Product Dimension:
1"
Product Projection:
1-7/8"
Product Style:
Transitional
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
15"
Department:
Door Hardware

Schaub 479-PN – Frequently Asked Questions

1) Will the Schaub 479 Haniburton appliance pull line up with my existing 15 inch hole spacing?
Yes, if your holes are 15 inches apart on center. The Schaub 479 Haniburton is built to a 15 inch center-to-center spacing with a 16 inch overall length, so it covers existing 15 inch prep without redrilling. If your panel is drilled to a different spacing, you need a different CTC, not this one.
2) What screws come with the Schaub 479 appliance pull and will they reach through a refrigerator panel?
The 479 uses 1/4-20 threaded screws in a 1 inch length. That 1 inch screw suits a standard cabinet panel or an overlay appliance panel of similar thickness. Thicker panels or a back-to-back install need longer 1/4-20 machine screws, which is the usual fix on appliance fronts.
3) Can the Schaub 479 be mounted back to back on a glass or full-height panel door?
Yes. The 479 Haniburton is offered in a back-to-back configuration as well as a single-sided one, so you can order two pulls sharing through-bolts for a panel door that is handled from both sides. Choose the back-to-back option at order time; it is a separate selection from the standard single pull.
4) What is the closest alternative to the Schaub 479 Haniburton appliance pull if I want the same look on the cabinet doors and drawers?
The Schaub 479 is a transitional solid brass appliance pull with 15 inch center-to-center spacing and a 16 inch overall length. For the smaller cabinet doors and drawers in the same kitchen, the Emtek 8405 Select cabinet pulls are offered in the Schaub Collection, so the design family carries across the run while the 479 handles the refrigerator or panel-front appliance. The Emtek Alexander and Emtek Bar cabinet pulls are also part of the Schaub Collection if you want a different profile for the smaller openings.
5) I only need a short drawer pull, not a 15 inch appliance pull. What should I order instead?
The Schaub 479 is built as an appliance pull at 15 inch center-to-center, which is far longer than a drawer needs. For short drawer runs, the Trimco 553 Series drawer pull is a 3 inch center-to-center pull, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Deltana SBP35 is a 3-1/2 inch solid brass square bar pull if you want a squared modern profile in brass.
6) What finishes does the Schaub Haniburton 479 come in for matching other cabinet hardware?
Six finishes: Satin Nickel, Polished Chrome, Matte Black, Polished Nickel, Satin Brass, and Unlacquered Brass. All six are available in both the single and back-to-back configurations. Unlacquered Brass is a living finish, so it will patina over time rather than hold its as-shipped look, which matters if you are standardizing a run of units and want them to stay identical.
7) What can I use to match the Schaub Haniburton look on the smaller cabinet doors and drawers?
Schaub designs are also carried under the Emtek Schaub Collection, including the Emtek 8405 Select cabinet pulls, the Alexander, Art Deco, and Bar cabinet pulls, all listed as cabinet knob/pull function. Those cover the door and drawer sizes the 479 does not, so you can keep one design family across the kitchen while using the 479 only on the appliance fronts. Confirm the finish name matches across brands before you mix them in one room.
8) I want a modern rather than transitional look for a long forged brass pull. What else should I look at?
The Schaub 479 Haniburton is a transitional style pull in solid brass. If the design direction is modern, the Omnia 1968/102 is a forged solid brass cabinet pull with 4 inch center-to-center spacing, and the Omnia 1969, 1970, and 1971 are forged solid brass modern pulls with 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch projections respectively. Those projections sit closer to the door face than the 479's 1-7/8 inch projection, which matters if the pull is next to a wall or an adjacent appliance.
9) If a long pull will not fit the cabinet face, what knob options coordinate with the Schaub 479?
The Schaub 479 needs 16 inches of overall length on the face, which some narrow doors cannot take. Where a knob is the better fit, the Orca Bachelor Collection CK-15030 is a round cabinet knob at 1-1/4 inch diameter and the CK-16030 is a round ring knob at the same 1-1/4 inch diameter; the Orca Blackcomb CK-17025 is a square knob at 25mm diameter for a more angular look. Emtek Art Deco cabinet pulls in the Schaub Collection are another route if you want to stay within the Schaub design family.
10) I need a plainer modern bar pull instead of a transitional appliance pull. What else is there?
The 479 Haniburton is a transitional style, so it has shaped ends rather than a straight tube. For a cleaner modern line, the Deltana SBP35 is a heavy-duty solid brass square bar pull, the Omnia 1969, 1970, and 1971 are forged solid brass modern pulls, and the Orca CK-12001 is a steel T-bar pull in satin nickel. Those are smaller-format pulls, so they suit doors and drawers rather than a full appliance front.
How fast can I get the Schaub 479-PN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 479-PN come with a warranty?
Absolutely. The Schaub 479-PN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 479-PN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 479-PN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!