Schaub 502 Italian Contemporar...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$49.00
$39.20
Schaub 502 6" Center to Center Italian Contemporary Cabinet Pull

Schaub 502 Italian Contemporary Cabinet Pull, 6" Center to Center, Solid Brass

(No reviews yet) Write a Review

Model: 502-LTBZ
From the Italian Contemporary Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$49.00
$39.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 502 Italian Contemporary Cabinet Pull, 6" Center to Center, Solid Brass

The Schaub 502 Italian Contemporary Cabinet Pull brings clean, contemporary lines to kitchen and bath cabinetry with a 6" center to center spacing for straightforward installation on standard drilling patterns. Crafted from solid brass, this pull measures 6-3/16" overall with a 3/8" base dimension and a 1-1/8" projection for a comfortable, functional grip. As part of the Italian Contemporary collection, it pairs a modern aesthetic with substantial solid brass construction suited to cabinet doors and drawers, and mounts using an 8/32 thread x 1" long screw for proper fit on standard cabinetry.

Key Features

  • Center to Center Spacing: 6" center to center spacing allows for straightforward installation on standard cabinet drilling patterns without additional redrilling.
  • Overall Dimensions: 6-3/16" overall length paired with a 3/8" base dimension creates a balanced, proportional profile on cabinet doors and drawer fronts.
  • Comfortable Projection: A 1-1/8" projection provides ample clearance and a comfortable grip for everyday use in kitchen and bath settings.
  • Solid Brass Construction: Made from solid brass for a substantial feel and long-term durability in frequently used cabinetry.
  • Italian Contemporary Design: Part of the Italian Contemporary collection, offering clean contemporary lines suited to modern cabinet pull applications.
  • Thread / Screw Size: 8/32 thread x 1" long accommodates standard cabinet door and drawer thicknesses for proper fit.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 6"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture and Millwork
  • Residential Remodeling Projects
  • Commercial Casework
  • Retail Display Fixtures

Why Schaub 502?

Schaub 502 cabinet pulls deliver dependable, professional-grade quality through solid brass construction designed for daily use in kitchens and baths. The Italian Contemporary collection pairs clean contemporary styling with precise 6" center to center spacing and a 1-1/8" projection, making it a reliable choice for cabinetry upgrades and remodeling projects where consistent fit and finish matter.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Italian Contemporary
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size::
8/32 thread x 1" long
Overall:
6-3/16"
Product Function:
Cabinet Pull
Product Dimension:
3/8"
Product Projection:
1-1/8"
Product Style:
Contemporary
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
6"
Department:
Door Hardware

Schaub 502-LTBZ – Frequently Asked Questions

1) What screws come with the Schaub 502 cabinet pull, and will they work on a thick drawer front?
The 502 uses 8/32 thread machine screws, 1 inch long. That length suits standard 3/4 inch drawer fronts and door stiles with a little to spare. On a thicker slab front, an applied panel, or a front with a backer added, 1 inch will come up short and you will need longer 8/32 screws.
2) What is the closest alternative to the Schaub 502 cabinet pull if I need a shorter center-to-center spacing on drawer fronts?
The Schaub 502 Italian Contemporary pull is built at 6 inch center to center with a 6-3/16 inch overall length, so it is sized for wide drawers and tall doors. For narrower fronts, the Omnia 1968/102 modern cabinet pull is a forged solid brass pull with 4 inch center-to-center spacing, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center-to-center options. The Trimco 553 series is a 3 inch center-to-center drawer pull for the smallest fronts. Any change in center-to-center means new boring, so confirm the hole spacing before you switch.
3) Can I use an Orca Hardware cabinet knob in place of the Schaub 502 pull?
No - they mount differently. The Schaub 502 is a two-hole pull at 6 inch center to center using 8/32 thread by 1 inch long screws. The Orca Hardware Bachelor Collection CK-15030 round knob and CK-16030 round ring knob, both 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob at 25mm are single-point cabinet knobs. Swapping to a knob leaves one of the two existing bores exposed, so knobs suit new fronts or drawers that were never bored for a pull.
4) How far does the Schaub 502 pull stand off the cabinet face?
Projection is 1-1/8 inches from the face of the door or drawer front to the back of the grip. That is enough knuckle room for a gloved hand, and it is the number to check against a tight galley run or an adjacent wall where an inset appliance panel swings past.
5) What finishes does the Schaub 502 come in for matching the rest of a kitchen?
Three finishes: Satin Nickel (SN), Polished Chrome (PC), and Light Bronze (LTBZ). If you are standardizing a whole run of cabinetry, order all of it in one go, since brass finishes can shift slightly between production lots.
6) What else could I use instead of the Schaub 502 if I want a similar contemporary solid brass pull?
Omnia's modern cabinet pull series are the closest cross-brand match in forged solid brass: the 1968/102 at 4 inch center-to-center, and the 1969, 1970, and 1971 series with projections of 1-3/16, 1-1/4, and 1-3/16 inches respectively. Deltana's SBP Series square bar pull is another solid brass option in a squared-off profile. For a steel bar pull rather than brass, Orca's CK-12001 T-Pull is a satin nickel steel bar.
7) I want the same solid brass construction as the Schaub 502 but in a squared-off bar profile - what else should I look at?
The Schaub 502 is a solid brass contemporary pull with a 3/8 inch base dimension and 1-1/8 inch projection. If you want solid brass in a square bar shape instead, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inches. On the forged solid brass side, the Omnia 1970 carries a 1-1/4 inch projection and the Omnia 1969 and 1971 both carry a 1-3/16 inch projection, all slightly further off the face than the Schaub 502.
8) For a high-traffic commercial casework job, is a steel pull a better choice than the Schaub 502?
The Schaub 502 is solid brass, which is what gives it its finish depth in satin nickel, polished chrome, and light bronze. If you want steel instead, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. It is a different look - a bar pull rather than the Italian Contemporary profile - so it is a substitution for spec and material reasons, not an appearance match.
9) Can I match the Schaub 502 with knobs from the same design family?
The 502 belongs to Schaub's Italian Contemporary collection. Schaub designs are also carried under Emtek's Schaub Collection, which includes the Emtek 8405 SELECT cabinet knob/pull along with the Alexander, Art Deco, and Bar series, if you want to mix a knob with the pull across a kitchen.
10) Is there a California Proposition 65 warning on the Schaub 502 pull?
Yes, the 502 carries a Proposition 65 warning for California residents; Schaub publishes the details on its product stewardship page. Worth noting for anyone specifying hardware into a California multi-family or hospitality job.
How fast can I get the Schaub 502-LTBZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 502-LTBZ come with a warranty?
Absolutely. The Schaub 502-LTBZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 502-LTBZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 502-LTBZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!