Schaub 512 6" Center to Center Arched Italian Contemporary Cabinet Pull

The 512 uses 8/32 thread screws, 1 inch long. That length suits a standard 3/4 inch cabinet door or drawer front with a little thread left in the post. If you are mounting through a thicker slab front or adding a backplate, you will need longer 8/32 machine screws.

Six inch center-to-center suits wider drawer fronts, appliance panels, and tall pantry doors. On narrow doors and small drawers it looks oversized and can crowd the stile. For those, a shorter run works better: ZenSupply carries the Trimco 553 Series drawer pull at 3 inch centers and the Trimco 562 Series in 3-1/2 inch, 4 inch and 96mm centers, plus the Deltana SBP35 square bar pull at 3-1/2 inches.

The Schaub 512 is fixed at 6 inch center to center with a 6-1/4 inch overall length, so it needs a drawer face wide enough to carry it. For narrower fronts, the Omnia 1968/102 is a forged solid brass modern pull at 4 inch center to center, the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center to center options, and the Trimco 553 series is a 3 inch center to center drawer pull. The Deltana SBP35 modern square bar pull is a 3-1/2 inch solid brass option.

Knobs will not. The Orca Hardware Bachelor Collection round cabinet knob CK-15030 and ring knob CK-16030 are 1-1/4 inch diameter, and the Blackcomb CK-17025 square knob is 25mm diameter; all three are single-point cabinet knobs, so they mount on one hole rather than the two holes the Schaub 512 needs at 6 inch center to center. The Orca CK-12001 T-pull bar is a 2 inch wide steel bar pull, a different material and profile from the 512's solid brass arch.

Projection is 1-3/16 inches off the face of the door, measured to the outside of the arch, so you get room to hook a full hand on a heavy drawer. The bar itself is 3/8 inch. That projection also tells you how far it stands into a walkway or off an appliance panel.

Three: Satin Nickel (SN), Polished Chrome (PC), and Light Bronze (LTBZ). If you are matching a kitchen already fitted with Schaub Italian Contemporary hardware, order the same finish code across knobs and pulls rather than by name alone.

Solid brass base material. For a property manager or hospitality buyer that matters on high-traffic drawers, where cast zinc pulls tend to snap at the post. Brass also takes the plated and bronze finishes more consistently over time.

The Omnia 1969 and Omnia 1971 modern cabinet pulls are both forged solid brass and both list the same 1-3/16 inch projection, so hand clearance off the door face is identical. The Omnia 1970 runs slightly deeper at 1-1/4 inches. Those are squared modern profiles rather than the arched Italian Contemporary shape of the 512.

Emtek offers a Schaub Collection line that includes the Emtek 8405 Select cabinet pulls plus the Alexander, Art Deco, and Bar cabinet pull series. Those are all catalogued as cabinet knob/pull function, the same function as the Schaub 512 arched Italian Contemporary pull, so they are a common way to mix pull profiles across a single cabinetry package. The 512 itself is the Italian Contemporary collection in a contemporary style, so the Emtek Bar series is the nearest in visual language.

The 512 belongs to Schaub's Italian Contemporary collection. Emtek also sells the Schaub Collection through its cabinet hardware line, including the Emtek 8405 SELECT, Alexander, Art Deco and Bar cabinet pulls, all catalogued as knob/pull families, so you can pull knobs and pulls from related Schaub-branded design families for the same kitchen. Confirm the finish code matches across whatever you combine.

Yes. Schaub publishes a Proposition 65 warning for this pull through its product stewardship page, which matters for institutional and government purchasers buying into California facilities.