Schaub 513A 13-3/4" Center to Center Arched Italian Contemporary Appliance Pull

Projection is 2-3/4 inches from the mounting surface to the outside of the grip, with a 1 inch base dimension where it meets the panel. That 2-3/4 inches matters in a galley kitchen or against an adjacent wall or island run, since the pull is what sets the real swing clearance, not the door itself.

It is built as an appliance pull, and the 13-3/4 inch center to center spacing is the limit on that. You can mount it to any door or drawer front wide enough to take 13-3/4 inch hole spacing plus the 14-1/2 inch overall length, which in practice means a wide pantry door, a tall panel, or a very wide drawer bank. For standard drawers, a shorter pull is the right call: Trimco's 553 Series runs 3 inch ctc and the 562 Series offers 3-1/2 inch, 4 inch, and 96mm, and Omnia's 1968/102 is 4 inch ctc.

The Schaub 513A is an arched appliance pull in the Italian Contemporary collection, solid brass, 13-3/4 inch center to center with a 14-1/2 inch overall length and 2-3/4 inch projection. For a straight bar profile in the same modern vein, the Emtek Bar Cabinet Pull in the Schaub Collection is a bar series pull, and the Deltana SBP35 is a modern square bar pull in solid brass. Both are bar shapes rather than arches, so the sightline across a cabinet front changes even where the mounting holes line up.

Three: Satin Nickel (SN), Polished Chrome (PC), and Light Bronze (LTBZ). If you are matching a whole kitchen, the 513A is part of Schaub's Italian Contemporary collection, so cabinet pulls and knobs from that same collection are the way to keep the finish and profile consistent across drawers, doors, and the appliance fronts.

The 513A arches out 2-3/4 inches, which is a deliberate deep grip. If you need something tighter to the face, the Omnia 1970 projects 1-1/4 inches and the 1969 and 1971 both project 1-3/16 inches, all forged solid brass. Those are cabinet pulls rather than appliance-length pulls, so check the center-to-center you need against the spacing already drilled in your panel.

They serve different openings. The Omnia 1968/102 is a modern forged solid brass cabinet pull with 4 inch center-to-center spacing, suited to doors and drawers. The Schaub 513A is a solid brass appliance pull at 13-3/4 inch center to center with a 2-3/4 inch projection for gripping a full appliance panel. If the goal is to carry one look across a kitchen, Omnia's 1969, 1970, and 1971 modern pulls are also forged solid brass in the same family, but none of them is specified at the 513A's appliance spacing.

The Schaub 513A is a contemporary arched pull in the Italian Contemporary collection, offered in Satin Nickel, Polished Chrome, and Light Bronze. For the smaller doors and drawers around the appliance, the Emtek Select 8405 cabinet pulls and the Emtek Alexander and Art Deco cabinet pulls all sit in the Schaub Collection and are catalogued as cabinet knob/pull hardware, so they are the natural companions when you want the appliance pull and the cabinet pulls to read as one program.

The Schaub 513A is a solid brass appliance pull with a 2-3/4 inch projection. Where a property manager wants a plainer specification, the Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel. It is steel rather than brass and a bar form rather than an arch, and it is catalogued simply as a pull rather than an appliance pull, so confirm the hole spacing suits the panel before swapping.

Screw lengths are not something to assume on an appliance install. Panel-ready refrigerator fronts and custom wood panels vary a lot in thickness, and appliance manufacturers often specify their own machine screws into tapped bosses rather than through-bolted wood screws. Confirm the fastener your appliance maker requires for its panel, and order that separately if it differs.

Emtek carries a Schaub Collection, and we stock several of those: the Emtek 8405 Select cabinet pulls, plus the Alexander, Art Deco, and Bar cabinet pulls. Those are separate series from Schaub's own Italian Contemporary collection that the 513A belongs to, so they are not a finish or profile match to the 513A. If you are building out a kitchen around the 513A, stay within Italian Contemporary.

Yes, Schaub publishes a Proposition 65 warning for this pull. Schaub's product stewardship page carries the notice, which is worth flagging if you are specifying for a California multi-family or hospitality project where the submittal package needs it.

No. The Orca Bachelor CK-15030 and CK-16030 are round cabinet knobs at 1-1/4 inch diameter and the Blackcomb CK-17025 is a square knob at 25mm diameter. Knobs mount on a single screw, while the Schaub 513A appliance pull is a two-hole mount at 13-3/4 inch center to center with a 14-1/2 inch overall length. They are knob hardware for small doors and drawers, not a replacement for an appliance-length pull.