Schaub 542 4" Center to Center Menlo Park Arched Cabinet Pull

Figure 1 inch of projection off the face. That's the distance from the cabinet surface to the back of the grip, which is what matters in a galley kitchen or anywhere a drawer front sits next to a wall or an appliance. The footprint on the face is 4-1/2 inches overall with 1/2 inch base dimensions at the posts.

The 542 Menlo Park is built only at 4 inch center-to-center, so it won't cover a narrower drilling. The Trimco 553 Series drawer pull is a 3 inch ctc option, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm ctc, which makes 562 useful when a job mixes spacings and you want one series throughout.

The Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, so it drops onto the same 4 inch drilling as the Schaub 542 Menlo Park pull, which is built on a zinc base. The Schaub 542 has a 1 inch projection, a 4-1/2 inch overall length and an arched transitional profile; the Omnia 1968/102 is styled as a modern pull. Choose on material and look, since the mounting centers match.

The Schaub 542 Menlo Park arched pull is a 4 inch center-to-center pull, so it will not land on 3-1/2 inch holes. For that spacing, the Trimco 562 series drawer pulls are offered in 3-1/2 inch, 4 inch and 96mm center-to-center options, and the Deltana SBP35 is a 3-1/2 inch heavy-duty solid brass square bar pull. Both are squared bar profiles rather than the Schaub's arched transitional shape.

It takes 8/32 machine screws, the standard cabinet hardware thread. If your drawer fronts are thicker than typical (a slab front with an applied panel, for example), you'll need longer 8/32 screws than what ships in the bag, since screw length has to cover the front thickness plus the post depth.

Seven: Satin Nickel, Brushed Nickel, Polished Nickel, Polished Chrome, Matte Black, Ancient Bronze, and Signature Satin Brass. That spread covers both the warm and cool sides, so a property manager standardizing across units can hold one model number and change only the finish suffix per building.

Yes - pulls on drawers and knobs on doors is a common split, and the Schaub 542 Menlo Park is a cabinet pull on 4 inch centers with a single-hole knob having no bearing on its drilling. For the knob side, Orca Hardware offers the Bachelor collection round cabinet knob at 1-1/4 inch diameter, a round ring version at the same 1-1/4 inch diameter, and the Blackcomb collection square knob at 25mm diameter. Match finish family across the two, since the Schaub 542 is offered in satin nickel, polished chrome, ancient bronze, brushed nickel, matte black, polished nickel and signature satin brass.

The Schaub 542 Menlo Park arched pull has a 1 inch projection. For more clearance behind the grip, the Omnia 1970 modern cabinet pull carries a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 are listed at 1-3/16 inch projection. All three are forged solid brass modern pulls, a different look from the Schaub's transitional arch.

The Schaub 542 Menlo Park measures 4-1/2 inches overall on 4 inch centers, which can crowd a narrow drawer front. For shorter runs, the Trimco 553 series drawer pulls are 3 inch center-to-center, and the Deltana SBP35 square bar pull is 3-1/2 inch. Using a shorter pull on small drawers and the Schaub 542 on wide ones is a normal way to keep one look across a run.

Transitional, from Schaub's Menlo Park collection. The arched profile bridges traditional and contemporary cabinetry, so it works in a shaker kitchen as readily as a flat-panel one. For a strictly modern square-bar look instead, the Deltana SBP35 Modern Square Bar Pull is the different direction.

Yes, Schaub publishes a Proposition 65 warning for this pull, which matters if you're shipping to or installing in California. Schaub's product stewardship page carries the notice.