Schaub 571 1-1/4" Atherton Hammered Knurled Edge Cabinet Knob

Yes, in most cases. A knob mounts on a single hole, and the Atherton 571 uses the common 8-32 screw thread, so it drops onto an existing single-bore knob hole. What changes at the face is coverage: the base that sits against the door is 3/4 inch, so if your old knob had a wider footprint you may see a witness mark or finish shadow around it.

The Schaub 571 Atherton knob is solid brass with a 1-1/4 inch knob diameter. If the door fronts call for a bigger knob, the Deltana KRB175 is a heavy-duty solid brass round knob with a groove at 1-3/4 inch diameter. Both are brass knobs; the Atherton carries a hammered, knurled edge in a traditional style, while the KRB175 is a plain round profile with a groove.

The knob head is 1-1/4 inches in diameter with a 3/4 inch base. That is a mid-size cabinet knob, comfortable for a full hand on doors and smaller drawers. On wide drawer fronts, most designers pair knobs of this size with matching pulls rather than using two knobs.

Four finishes: Oil Rubbed Bronze, Polished Chrome, Polished Nickel, and Satin Brass. Oil Rubbed Bronze is a living finish that will shift with handling over time, while the plated chrome and nickel hold their appearance. If you are matching across a whole run of cabinetry, order the full quantity at once so all pieces come from the same finishing lot.

Solid brass is the base material, with the finish applied over it. That matters for a rental or hospitality property where knobs get handled constantly, and it is why the hammered face with the knurled edge holds crisp detail rather than looking cast and soft.

Emtek lists a Schaub Collection of cabinet knobs, including the Emtek 8665 Select cabinet knobs and the Emtek Allerton cabinet knob, both catalogued as cabinet knob/pull. The Schaub 571 itself is the Atherton collection knob with a hammered knurled edge in solid brass. If a specifier has written an Emtek part number, the Schaub Collection knobs under Emtek are the same family of designs.

The Schaub 571 Atherton has a hammered face with a knurled edge in a traditional style. For a smoother, less decorative look, the Orca Hardware CK-18032 Mission round cabinet knob or the Orca CK-19032 Whistler cabinet knob are both straightforward round cabinet knobs. They mount as standard cabinet knobs the same way, but without the hammered texture.

It mounts in the same place but it is not the same look. The Emtek Astoria glass cabinet knob from the Schaub Collection is a glass knob, while the Schaub 571 Atherton is solid brass with a hammered, knurled edge. If you are matching an existing run of metal Atherton knobs, the Astoria will read as a different material at the door front. The Emtek Art Deco cabinet knob is another Schaub Collection option if you want metal in a different styling.

Cabinet knobs of this type ship with a standard 8-32 machine screw. If your doors are thicker than standard, for instance a slab front with an applied panel, buy longer 8-32 screws separately and cut to fit rather than forcing a short screw with only a thread or two of engagement.

The Schaub 571 Atherton is a solid brass knob with 1-1/8 inch projection and 8/32 thread. The Delaney solid brass cabinet knob is another solid brass cabinet knob option if the decorative hammered edge is not required for the unit. Both are brass knobs that take standard cabinet knob screws.