Schaub 572 1-1/4" Atherton Cabinet Knob

The Atherton 572 knob is tapped for an 8/32 machine screw, which is the standard cabinet knob thread, so replacement screws are easy to source in whatever length your drawer front needs. Thicker fronts or fronts with an applied panel just call for a longer 8/32 screw.

It mounts on a single 8/32 screw through one hole, so a knob-for-knob swap reuses the existing bore with no new drilling. The 3/4 inch base will not hide a two-hole pull layout though; if you are converting from pulls, you will need to plug and refinish or use a backplate.

The Schaub 572 Atherton knob is a solid brass cabinet knob with a 1-1/4 inch knob diameter. If you need a noticeably larger knob in the same base material, the Deltana KRB175 is a heavy-duty solid brass round knob with a groove detail at a 1-3/4 inch diameter. The half-inch jump in diameter changes the visual weight on a door or drawer face, so decide based on cabinet scale.

The Schaub 572 Atherton is an all solid brass knob, so there is no glass option within it. For a glass knob in the same cabinet knob role, the Emtek Astoria glass cabinet knob in the Schaub collection is the direct alternative and carries a cabinet knob/pull function. Metal finish on the Astoria rosette can be coordinated with brass-finish hardware elsewhere in the run.

Projection is 1-1/8 inches from the face of the door or drawer front, with a 3/4 inch base where it meets the wood and a 1-1/4 inch knob diameter. That is worth checking in a tight galley or next to an adjacent appliance door swing.

Four finishes: Oil Rubbed Bronze, Polished Chrome, Polished Nickel and Satin Brass. Oil Rubbed Bronze is a living finish on solid brass, so plan on it darkening and wearing at the touch points over time.

Solid brass base material, not a zinc casting. For a property manager or a builder specifying a whole kitchen, that matters for how the finish wears and how the 8/32 threads hold up to repeated re-tightening.

The Atherton tops out at 1-1/4 inches in diameter. For a bigger grip, the Deltana KRB175 is a heavy-duty solid brass round knob with a groove at 1-3/4 inch diameter. If you want to stay in the same design family instead, Emtek sells the Schaub Collection knobs including Allerton, Art Deco and Astoria Glass.

The Schaub 572 Atherton is a Traditional style knob with a round 1-1/4 inch head and a 3/4 inch base. For a mission or craftsman program, the Orca Hardware CK-18032 Mission round cabinet knob comes out of the 18-Mission collection and is a cabinet knob in the same function. The Orca CK-19032 Whistler knob, from the 19-Whistler collection, is the other Orca round knob option if you want a different profile in the same family of styling.

Yes. Emtek offers the Allerton cabinet knob and the Art Deco cabinet knob, both in the Schaub collection, as well as the Emtek 8665 SELECT cabinet knob. All three are catalogued with a cabinet knob/pull function, so they serve the same role as the Schaub 572 Atherton knob on cabinet doors and drawers. The Atherton is a Traditional style knob, so the Allerton is usually the closer visual match and the Art Deco the deliberate departure.

The Schaub 572 Atherton ships with an 8/32 thread screw size, which is the standard cabinet knob thread, so single-hole knobs such as the Delaney solid brass cabinet knob, the Deltana KRB175, or the Orca CK-18032 Mission round knob mount through the same single bored hole. What changes between them is head diameter and base footprint, so confirm the substitute's base is large enough to cover any wear ring left by the knob you are removing.

Not a like-for-like one. The Emtek 8665 is part of the Emtek SELECT series and is catalogued as a cabinet knob/pull, meaning it is built around the SELECT interchangeable system rather than as a fixed single-piece knob like the Schaub 572 Atherton. Both serve cabinet doors and drawers, but the Atherton is a finished solid brass knob in one piece at 1-1/4 inch diameter, so specify the 572 when you want a single fixed part rather than a component program.