Schaub 575 3" Center to Center Atherton Knurled Edge Cup Pull

Yes, if your drawers are drilled on 3 inch centers. The Atherton 575 cup pull is a 3 inch center-to-center pull, which is one of the two standard spacings on older cabinetry along with 96mm. Overall length is 4-1/2 inches, so it covers a bit more of the drawer face than the hole spacing alone suggests. Screws thread 8/32, the usual cabinet hardware thread.

Trimco's 553 Series drawer pull is also 3 inch center-to-center, so it uses the same holes as the Atherton 575 with a different profile. If you are redrilling anyway, the Trimco 562 Series runs 3-1/2 inch, 4 inch, and 96mm spacings.

The Schaub 575 Atherton cup pull is fixed at 3 inch center-to-center, so it will not reach wider hole spacing. For 3-1/2 inch, 4 inch, or 96mm centers, the Trimco 562 Series drawer pull is offered in those spacings. The Omnia 1968/102 cabinet pull is a forged solid brass option at 4 inch center-to-center. Either avoids re-drilling drawer fronts.

The Trimco 553 Series drawer pull is also built on 3 inch center-to-center spacing, so it drops onto the same drilled hole pattern as the Schaub 575 Atherton cup pull. The difference is form: the Schaub 575 is a cup pull in solid brass with a knurled edge and a 1-1/2 inch projection, while the Trimco 553 is a drawer pull rather than a cup. If the cabinets are already bored at 3 inch centers, either will land on the existing holes.

Projection is 1-1/2 inches off the face. That is worth checking in a galley kitchen or against an adjacent appliance panel, since a cup pull's hand grip sits under the lip rather than beside it.

The 575 uses 8/32 machine screws. If you have thick fronts, applied moulding, or an added panel, buy longer 8/32 screws in the same thread and the pull mounts the same way.

Solid brass is the base material on the Atherton 575, under all four finishes. For rental turns and high-traffic kitchens that matters, since a plated zinc casting is the part that usually cracks at the screw boss.

A cup pull like the Atherton 575 is a traditional recessed grip, gripped from underneath, and it reads period on shaker and inset cabinetry. It only works pulling one direction, so it suits drawers rather than doors. If you want something you can grab from any angle or that fits a modern kitchen, a bar pull is the alternative, for example the Deltana SBP35 square bar pull or Emtek's Bar cabinet pull.

The Schaub 575 Atherton is a traditional-style cup pull. For a contemporary kitchen, the Deltana SBP35 is a modern square bar pull in solid brass, and Omnia offers the modern 1969, 1970 and 1971 cabinet pulls in forged solid brass, with the 1970 at a 1-1/4 inch projection and the 1969 and 1971 at 1-3/16 inch. All are bar-style pulls rather than cups, so they grip from the face of the drawer instead of from underneath.

Emtek's Schaub Collection includes the Emtek 8405 SELECT cabinet pulls and the Alexander, Art Deco and Bar cabinet pulls. They are a common pairing when a kitchen mixes cup pulls on drawers with bar pulls on doors. Confirm the finish name matches across the two lines before mixing on the same run - the Schaub 575 is offered in oil rubbed bronze, polished chrome, polished nickel and satin brass.

No. The Orca Bachelor Collection CK-15030 and CK-16030 are round cabinet knobs at 1-1/4 inch diameter, and the CK-17025 Blackcomb is a 25mm square knob - all single-hole knobs. The Schaub 575 Atherton is a two-hole cup pull on 3 inch center-to-center spacing with 8/32 screws, so swapping to a knob leaves one of the two existing bores exposed. The Orca CK-12001 T-pull bar is likewise a different mounting form.

Four: Oil Rubbed Bronze, Polished Chrome, Polished Nickel, and Satin Brass. If you are standardizing a whole kitchen or a building's unit millwork, pick the finish first and keep the rest of the Atherton collection in the same one.

That is the normal way this collection gets used: cup pulls on the drawer banks, knobs on the doors. The 575 is part of Schaub's Atherton collection, so matching pieces in the same collection and finish keep the traditional look consistent. If you want a plain round knob instead, Orca's Bachelor Collection round knob is a 1-1/4 inch diameter option.