Schaub 577 8" Center to Center Atherton Knurled Cabinet Pull

Yes. The Atherton 577 is drilled at 8 inch center to center, so it lines up with any existing pair of holes bored on 8 inch spacing. Overall length is 8-1/2 inches, so the posts sit just 1/4 inch in from each end, leaving very little cover if your old holes are off by more than a hair.

The Atherton 577 uses 8/32 threaded machine screws, the standard cabinet hardware thread. If you are mounting to a drawer front thicker than usual, or through a false front plus a box front, buy longer 8/32 screws to suit, the thread size stays the same.

The Schaub 577 Atherton knurled pull is fixed at 8 inch center-to-center with an 8-1/2 inch overall length, so it needs a wide drawer front. For narrower fronts, the Omnia 1968/102 modern cabinet pull is forged solid brass with 4 inch center-to-center spacing, and the Trimco 553 Series drawer pull is offered at 3 inch center-to-center. The Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm center-to-center. All three change the look from the Atherton knurled traditional profile to a plainer bar or drawer pull.

Projection is 1-1/2 inches from the face of the door or drawer, which gives full hand clearance on a large drawer or an appliance panel. The bases measure 1-1/4 inches, so the posts are substantial, not thin wire-style feet.

Four finishes: Oil Rubbed Bronze, Polished Chrome, Polished Nickel and Satin Brass. Oil Rubbed Bronze is a living finish that darkens and wears at the touch points, so on a kitchen where every drawer must stay matched over time, Polished Chrome or Polished Nickel hold their appearance more uniformly.

The Atherton 577 is a traditional-style pull with a knurled (cross-hatched textured) grip, so it reads period rather than contemporary and gives more purchase on a heavy drawer. If you want a clean modern look instead, the Emtek Bar Cabinet Pull or the Deltana SBP35 Modern Square Bar Pull are smooth bar profiles in the same solid brass family of hardware.

For shorter runs, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch and 96mm center-to-center, and the Trimco 553 Series is 3 inch. The Omnia 1968/102 is a forged solid brass pull at 4 inch center to center. All three are different styling from the Atherton knurled look, so use them where the appearance does not have to match.

Yes. Emtek lists several cabinet pulls under its Schaub Collection, including the Emtek 8405 Select cabinet pulls, the Emtek Alexander cabinet pull, the Emtek Art Deco cabinet pull, and the Emtek Bar cabinet pull, all catalogued as cabinet knob/pull function. The Schaub 577 itself is the Atherton collection in a traditional style, so the Emtek Art Deco and Alexander series give you a different decorative pattern while staying in the same Schaub design family.

The Schaub 577 Atherton is a traditional knurled pull in solid brass with a 1-1/2 inch projection. For a plain modern bar, the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in heavy-duty solid brass, and the Emtek Bar cabinet pull is the bar profile within the Schaub Collection. Omnia also offers modern forged solid brass pulls: the 1969 and 1971 at 1-3/16 inch projection and the 1970 at 1-1/4 inch projection, all of which sit closer to the door face than the 577.

The Schaub 577 Atherton pull has a solid brass base material. Among comparable pulls, the Deltana SBP35 is heavy-duty solid brass, and the Omnia 1968/102, 1969, 1970, and 1971 are all forged solid brass. The Orca CK-12001 T-pull bar is steel in satin nickel, so it is the one to skip if solid brass is a requirement on your spec.

Yes, mixing pulls on drawers with knobs on doors is common. Emtek carries the Schaub collection, so the Emtek 8405 Select cabinet knob/pull line is the closest route to a matched program. If you only need a plain round knob to sit alongside, the Orca Bachelor Collection round cabinet knob at 1-1/4 inch diameter matches the 1-1/4 inch base of the Atherton pull visually.

Yes, Schaub publishes a Proposition 65 warning for this product through its product stewardship page. Institutional and government buyers in California who need the notice on file should pull it from Schaub before the submittal goes in.