Schaub 738 15" Center to Center Traditional Appliance Pull

The Schaub 738 mounts on 15 inch center-to-center spacing. Overall length of the pull is 15-1/2 inches, so the posts sit just a quarter inch in from each end. If you are replacing an existing appliance pull, measure center of screw hole to center of screw hole on the old one; anything other than 15 inches means new holes in the panel.

Projection is 2-1/4 inches, measured from the face of the panel to the outside of the grip. That is a full-hand clearance, which is what you want on a heavy appliance door. Check it against anything adjacent, a return wall or a door swinging into the run, before you set the handle location.

The Schaub 738 is a traditional-style appliance pull in solid brass with 15 inch center-to-center spacing and a 2-1/4 inch projection. Within the Emtek range, the Emtek 8405 Select cabinet pull is part of Emtek's Schaub Collection and carries the same design lineage, and the Emtek Alexander cabinet pull is another Schaub Collection series. Both Emtek items are catalogued as cabinet knob/pull products rather than a dedicated 15 inch appliance pull, so confirm the center-to-center spacing you need before substituting on a refrigerator or freezer panel.

No. The Schaub 738 is an appliance pull with 15 inch center-to-center spacing and a 15-1/2 inch overall length, sized to span an appliance panel. The Trimco 553 Series drawer pull is 3 inch center-to-center and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch and 96mm center-to-center. Those are drawer-scale pulls and will not land on appliance-panel boring, though they are a reasonable match for the small drawers in the same run.

Twelve: Polished Brass, Antique Brass, Antique Light Brass, Polished Nickel, Satin Nickel, Antique Nickel, Distressed Nickel, Polished Chrome, Oil Rubbed Bronze, Distressed Bronze, Michelangelo Bronze, and Flat Black. If you are matching cabinet knobs and pulls already installed from the Schaub Traditional Designs collection, order the same finish code across the run rather than matching by eye.

You can, on wide drawers or tall pantry doors, as long as the door or drawer face is wide enough to carry 15 inch hole spacing plus material either side. On standard base cabinet drawers it will overhang. For normal cabinetry, a short center-to-center pull is the right call, something like the Trimco 553 Series at 3 inch ctc or the Trimco 562 Series in 3-1/2 inch, 4 inch, or 96mm.

The Schaub 738 covers the appliance panels at 15 inch center-to-center. For the surrounding cabinetry, the Trimco 553 Series drawer pulls at 3 inch center-to-center and the Trimco 562 Series at 3-1/2 inch, 4 inch or 96mm cover typical drawer boring, and the Orca Hardware Bachelor Collection round knob CK-15030 and round ring knob CK-16030, both 1-1/4 inch diameter, give single-hole options for doors. Verify finish naming across brands, since the 738 is offered in twelve finishes including polished brass, oil rubbed bronze, satin nickel and polished chrome.

Yes. The Schaub 738 is solid brass with a traditional profile. If the specification calls for a steel bar pull instead, the Orca Hardware CK-12001 T-Pull Bar is steel with a 2 inch bar width in satin nickel. It is a plain bar form rather than a traditional appliance pull, and it is offered in the one satin nickel finish where the 738 runs twelve finishes including oil rubbed bronze, antique brass, flat black and polished nickel.

The bar measures 3/4 inch. Combined with the 2-1/4 inch projection, that gives a substantial handful rather than a thin wire bar, which is the usual reason people choose an appliance-scale pull over stretching a cabinet pull to length.

Emtek sells a Schaub Collection within its SELECT cabinet hardware line, including the 8405 Select pulls and the Alexander, Art Deco and Bar pulls. Those are the pieces designed to sit alongside Schaub, so for knobs and shorter pulls elsewhere in the room that is the family to pull from. Match finish by name and order from one run where you can.

Yes, Schaub publishes a Proposition 65 warning for California residents on this pull. Schaub's product stewardship page carries the details, and the warning is a standard disclosure on solid brass hardware.

The Schaub 738 is from Schaub's Traditional Designs collection. For a more stylized period look, the Emtek Art Deco cabinet pull is an Art Deco series pull in Emtek's Schaub Collection, and the Emtek Bar cabinet pull is a plain bar series in the same collection for a cleaner line. Both are catalogued as cabinet knob/pull products, so check the center-to-center offering against the 15 inch spacing the 738 uses before swapping on an appliance front.