Schaub 868 15" Center to Center Corinthian Appliance Pull

Projection is 2-1/8 inches, with a base footprint of 2-3/4 inches at each post. That is a deep grip, which is what you want on a heavy refrigerator or freezer panel, but check it against anything that swings past the pull, such as an adjacent door, a wall return, or an island walkway.

No. The Trimco 553 Series is a drawer pull at 3 inch center-to-center, and the Trimco 562 Series offers 3-1/2 inch, 4 inch and 96mm center-to-center. The Schaub 868 spans 15 inch center-to-center with an 18-5/8 inch overall length, which is appliance-panel scale. The Trimco pulls suit drawer fronts and small doors; they will not cover or reuse the hole pattern of a 15 inch appliance pull.

The Schaub 868 projects 2-1/8 inch off the face with a 2-3/4 inch base. Among forged solid brass alternatives, the Omnia 1970 projects 1-1/4 inch, and the Omnia 1969 and Omnia 1971 each project 1-3/16 inch. Those are shallower pulls for walkways and appliance faces near an island, though they are cabinet-scale modern pulls rather than a traditional appliance pull at the 868's 15 inch center-to-center span.

Four: Ancient Bronze (ABZ), Corinthian Silver (CRS), Michelangelo Bronze (MIBZ), and Redington Brass (RB). These are the finishes used across the Corinthian collection, so cabinet knobs and pulls from the same collection will match the appliance pull on a full kitchen.

Solid brass base material. On an appliance pull that matters more than on a drawer pull, since a refrigerator door gets grabbed with full body weight and a cast zinc post is where cheaper pulls break. The decorative finishes are applied over the brass.

Yes, the 868 is from Schaub's Corinthian collection and is styled traditional, with a shaped body rather than a straight tube. If you are after a plain modern bar instead, the Omnia 1968, 1969, 1970 and 1971 cabinet pulls are forged solid brass in a modern profile, and the Orca CK-12001 T-pull bar is a steel bar pull in satin nickel.

The Schaub 868 is a Traditional-style pull from the Corinthian collection in solid brass with a 15 inch center-to-center span and 18-5/8 inch overall length. If the kitchen is contemporary rather than traditional, the Emtek Bar Cabinet Pull in the Schaub Collection is a bar-profile pull, and the Deltana SBP35 is a modern square bar pull in solid brass. Both change the visual style while keeping a brass pull; confirm the mounting span matches the 15 inch hole centers before you swap, since the 868 is sized for appliance panels.

The Schaub 868 is a Corinthian-collection appliance pull in solid brass. Emtek carries the Schaub Collection in its SELECT cabinet pulls line, model 8405, along with the Alexander and Art Deco series cabinet knobs and pulls, so those are the route to smaller cabinet-scale pieces in the same Schaub family. For a coordinated but different look, the Omnia 1968/102 is a forged solid brass pull with 4 inch center-to-center spacing, sized for standard cabinet doors and drawers rather than appliance panels.

They are different products. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. The Schaub 868 is solid brass and comes in Ancient Bronze, Corinthian Silver, Michelangelo Bronze, and Redington Brass. If the job calls for a brass pull in a warm bronze or brass tone to match traditional cabinetry, the 868 is the one; if a satin nickel steel bar suits the kitchen, the CK-12001 is a different direction entirely.

Emtek carries a Schaub Collection of cabinet knobs and pulls, including the Emtek 8405 SELECT cabinet pulls and the Alexander, Art Deco and Bar series. Those are the closest line to pair with a Schaub appliance pull on the same kitchen. Match on finish name before ordering, since finishes like Corinthian Silver and Michelangelo Bronze are specific to the Schaub Corinthian range.

Yes. Schaub publishes a Proposition 65 warning for this pull for California residents, linked through their product stewardship page. Worth flagging if you are buying for a multi-family or institutional job with California delivery and need the notice in your submittal package.

The Schaub 868 is an appliance pull, so it handles the refrigerator and dishwasher panels. For knobs elsewhere, the Orca Hardware Bachelor Collection offers a round cabinet knob at 1-1/4 inch diameter and a round ring knob at 1-1/4 inch diameter, and the Blackcomb Collection CK-17025 is a square knob at 25mm diameter. Emtek's Alexander and Art Deco series in the Schaub Collection also cover cabinet knobs and pulls if you want to stay closer to the Schaub look.