Schaub 753 Versailles Collecti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$32.00
$21.06
Schaub 753 3" Center to Center Versailles Cabinet Pull

Schaub 753 Versailles Collection 3" Center to Center Cabinet Pull in Solid Brass

(No reviews yet) Write a Review

Model: 753-ALP
From the Versailles Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$32.00
$21.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 753 Versailles Cabinet Pull, 3" Center to Center, Solid Brass

The Schaub 753 Versailles Cabinet Pull brings the Symphony Elegance style to the Versailles collection, offering a cabinet pull sized for 3" center to center mounting with a 1-1/8" projection from the door or drawer face. Built from solid brass base material, this pull measures 4-1/8" overall with 3/4" base dimensions, giving it a substantial, well-proportioned presence on cabinetry. It mounts using 8/32 thread x 1 screws for a secure, long-term installation.

Key Features

  • Center to Center Spacing: 3" center to center spacing allows for straightforward installation on standard cabinet doors and drawers.
  • Projection: 1-1/8" projection from the mounting surface provides comfortable hand clearance for everyday use.
  • Base Dimensions: 3/4" base dimensions keep the mounting footprint refined and proportionate to the pull.
  • Overall Length: 4-1/8" overall length suits a wide range of cabinet door and drawer sizes.
  • Solid Brass Construction: Solid brass base material delivers durable, long-lasting performance suited to daily cabinetry use.
  • Thread / Screw Size: 8/32 thread x 1 for compatible mounting hardware.
  • Versailles Collection, Symphony Elegance Style: Part of the Versailles collection in the Symphony Elegance style, bringing coordinated detailing to kitchen and bath cabinetry.
  • Knob Diameter Reference: 1-1/2" knob diameter listed for coordinating Versailles collection knobs.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Knob Diameter: 1-1/2"
  • Thread / Screw Size: 8/32 thread x 1"
  • Overall: 4-1/8"
  • Product Dimension: 3/4"
  • Product Projection: 1-1/8"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture and Built-Ins
  • Custom Millwork Projects
  • Residential Remodeling and New Construction
  • Commercial Cabinetry Installations

Why Schaub 753?

Schaub 753 cabinet pulls combine solid brass construction with the detailed Symphony Elegance style of the Versailles collection, giving cabinetry a coordinated, well-built look. With defined dimensions for center to center spacing, projection, and overall length, this pull is engineered for dependable, everyday performance in kitchen and bath cabinetry.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Versailles
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Knob Diameter:
1-1/2"
Thread / Screw Size:
8/32 thread x 1"
Overall:
4-1/8"
Product Function:
Cabinet Pull
Product Dimension:
3/4"
Product Projection:
1-1/8"
Product Style:
Symphony Elegance
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
Department:
Door Hardware

Schaub 753-ALP – Frequently Asked Questions

1) Will the Schaub 753 Versailles pull drop into my existing 3 inch center-to-center holes?
Yes. The Schaub 753 Versailles pull is drilled on 3 inch centers, which is the most common cabinet pull spacing in North America, so it lands on existing 3 inch holes with no redrilling. Overall length is 4-1/8 inches, so it covers a little more face than the hole spacing alone.
2) What screws come with the Schaub 753 pull, and will they work on a thicker drawer front?
The 753 Versailles pull takes 8/32 thread screws at 1 inch long. That length suits a standard 3/4 inch drawer front or door with a little room to spare. If you are mounting through a thicker front, a false front, or a front with an applied panel, you will need longer 8/32 machine screws.
3) What is the closest alternative to the Schaub 753 Versailles pull if I need to match an existing 3 inch center-to-center drilling?
The Schaub 753 Versailles pull is a 3 inch center-to-center cabinet pull in solid brass. If you need a different look on the same 3 inch hole spacing, the Trimco 553 Series drawer pulls are also built on 3 inch center-to-center, so they drop onto the same drilling without new holes. The Trimco is a drawer pull series rather than a decorative Versailles-collection design, so expect a plainer profile.
4) How far does the Schaub 753 pull stand off the cabinet face?
Projection is 1-1/8 inches from the face of the door or drawer front. That is enough grip clearance for a gloved hand, and worth checking against any adjacent appliance panel or inside-corner cabinet where a pull can collide with the run beside it.
5) Is the Schaub 753 solid brass or plated pot metal?
Solid brass base material. That matters for a kitchen or bath install where a zinc pull will pit under cleaners and humidity, and it is why the finishes hold up under daily handling.
6) What finishes does the Schaub 753 Versailles pull come in?
Three: Oil Rubbed Bronze (ORB), Satin Nickel (SN), and Antique Light Polish (ALP). If you are standardizing a whole kitchen or a multi-unit build, pick one and order the matching Versailles knobs in the same finish code so the run stays consistent.
7) I need a plain modern bar pull instead of an ornate one. What else do you carry?
The Versailles 753 is a decorative solid brass pull, so if the job calls for straight modern lines look at the Deltana SBP35 Modern Square Bar Pull at 3-1/2 inches in solid brass, or the Omnia 1968/102 modern pull in forged solid brass at 4 inch center to center. Orca Hardware's CK-12001 T-Pull Bar in satin nickel steel is another plain-bar option.
8) Is there another 3 inch center-to-center drawer pull if the Versailles look is too decorative?
Trimco's 553 Series drawer pulls are also offered at 3 inch center to center, so they drop into the same hole pattern. If you can redrill, the Trimco 562 Series runs 3-1/2 inch, 4 inch, and 96mm spacing.
9) How much face space does the Schaub 753 need on a narrow drawer or a center stile?
Plan on 4-1/8 inches of clear run for the overall length, with a 3/4 inch base footprint at each mounting point. On narrow drawers or where two pulls sit near a center stile, measure the 4-1/8 inch overall rather than the 3 inch hole spacing.
10) What is a good modern-looking substitute for the Schaub 753 Versailles pull in the same solid brass?
The Schaub 753 belongs to the Versailles collection in the Symphony Elegance style, a decorative traditional profile in solid brass. For a contemporary alternative that keeps solid brass construction, the Omnia 1969, 1970, and 1971 Modern Cabinet Pulls are forged solid brass with projections of 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch respectively, against the 1-1/8 inch projection on the 753. The Deltana SBP35 Modern Square Bar Pull is another solid brass square-bar option.
11) What is a lower-cost steel alternative if I do not need solid brass like the Schaub 753?
The Schaub 753 is a solid brass Versailles pull. Where a decorative brass finish is not required - back-of-house casework, utility cabinets - the Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. It is a plain bar profile rather than a traditional decorative design, so it is best kept out of finished front-of-house millwork.
12) Can the Schaub 753 be used on an exterior or entry door?
No. It is a cabinet pull, sized for cabinet doors and drawer fronts with 8/32 screws on 3 inch centers. It has no latching function and is not a door pull. For entry hardware you need a door pull or a lockset instead.
13) If I want a square profile instead of the Schaub 753, what are my options?
For a squared-off look in place of the Versailles 753, the Deltana SBP35 is a 3-1/2 inch modern square bar pull in heavy-duty solid brass, and the Orca Hardware CK-17025 Blackcomb Collection is a 25mm square cabinet knob for single-hole mounting. The Deltana keeps the two-post pull format; the Orca is a knob and will not reuse a two-hole drilling.
How fast can I get the Schaub 753-ALP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 753-ALP come with a warranty?
Absolutely. The Schaub 753-ALP is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 753-ALP?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 753-ALP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!