Schaub 975S Sunburst Collectio...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$144.00
$83.59
Schaub 975S 5" Center to Center Sunburst Cabinet Pull

Schaub 975S Sunburst Collection Solid Brass Cabinet Pull, 5" Center to Center

(No reviews yet) Write a Review

Model: SCH-975S
From the Sunburst Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$144.00
$83.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Schaub 975S Sunburst Collection Solid Brass Cabinet Pull, 5" Center to Center

The Schaub 975S Sunburst Collection Solid Brass Cabinet Pull brings the Symphony Elegance style to cabinetry with a sculpted sunburst design. This cabinet pull features a 5" center to center mounting pattern, a 1-5/8" projection from the mounting surface, and overall dimensions of 1-1/8" x 6-1/8". Constructed from Solid Brass, this pull is part of the Sunburst collection, combining the Symphony Elegance style with durable solid brass construction for cabinet and drawer applications in kitchens, baths, and fine furniture.

Key Features

  • Center to Center Spacing: 5" center to center mounting pattern for straightforward installation on standard cabinet drilling.
  • Overall Dimensions: 1-1/8" x 6-1/8" overall size suited to a range of cabinet and drawer fronts.
  • Projection: 1-5/8" projection from the mounting surface provides a comfortable grip.
  • Solid Brass Construction: Solid Brass base material delivers durability for everyday cabinet and drawer use.
  • Symphony Elegance Style: Part of the Symphony Elegance style within the Sunburst collection, featuring a sculpted sunburst motif.
  • Thread / Screw Size: 8/32 thread x 1 for compatible mounting.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 8/32 thread x 1"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 5"
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Commercial Cabinetry Installations
  • Pantry and Storage Cabinet Doors
  • Drawer Fronts in Kitchen Islands

Why Schaub 975S?

The Schaub 975S Sunburst Collection Cabinet Pull pairs Solid Brass construction with the sculpted Symphony Elegance style for cabinetry that stands out. With its 5" center to center spacing and 1-5/8" projection, this pull is engineered for reliable, comfortable everyday use on kitchen, bath, and furniture applications.

"

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Sunburst
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 thread x 1"
Product Function:
Cabinet Pull
Product Dimension:
1-1/8" x 6-1/8"
Product Projection:
6-1/8"
Product Style:
Symphony Elegance
Product Material:
Solid Brass
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
5"
Department:
Door Hardware

Schaub SCH-975S – Frequently Asked Questions

1) Will the Schaub 975S Sunburst pull drop into holes drilled for an existing 5 inch center-to-center pull?
Yes. The 975S Sunburst pull is drilled on 5 inch centers, so it lands on the same two-hole layout as any other 5 inch CTC pull. No new boring needed if that is what is already in the drawer front or door.
2) My drawer fronts are drilled for 3 inch centers - what should I use instead of the Schaub 975S?
The 975S is fixed at 5 inch center to center, so it will not land on 3 inch bores. The Trimco 553 series drawer pulls are 3 inch center to center, and the Trimco 562 series offers 3-1/2 inch, 4 inch, and 96mm center to center options if you need to cover a mix of existing hole patterns across a job.
3) What is the closest alternative to the Schaub 975S Sunburst pull if I want a plainer, modern look in solid brass?
The Schaub 975S is a decorative Sunburst collection pull in the Symphony Elegance style, solid brass, 5 inch center to center with 1-1/8 inch by 6-1/8 inch overall dimensions. If the cabinetry calls for something plain instead of decorative, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center to center spacing, and the Deltana SBP35 is a modern square bar pull at 3-1/2 inch in solid brass. Both change the hole spacing, so the drilled centers in the door or drawer front have to be confirmed before you swap.
4) How much room does the Schaub 975S pull take up on a narrow drawer front?
Overall size is 1-1/8 x 6-1/8 inches, so on a 5 inch CTC hole layout you get about half an inch of pull body past each screw. On narrow top drawers or slim doors, lay out 6-1/8 inches of clear face width before you commit to the bore.
5) What finishes does the Schaub 975S Sunburst pull come in?
Three: Estate Dover (ED), Hi-Lited Luminescent Bronze (HLB), and Silver Antique (SA). All three are hand-applied style finishes over solid brass, so if you are matching pulls already installed in a kitchen, order the same finish code rather than by name alone.
6) Is the Schaub 975S solid brass or plated zinc?
Solid brass is the base material on the 975S Sunburst pull. That matters for two reasons on a remodel: brass takes the antiqued and hi-lited finishes without the flaking you get on plated die-cast, and it holds up to daily kitchen and bath handling.
7) I need a plain modern bar pull, not a decorative one. What should I look at instead of the Schaub Sunburst?
The Sunburst is a decorative cast pull, so it is the wrong choice for a flat-panel modern kitchen. For a clean bar profile in solid brass, look at the Omnia 1968/102, which is a forged solid brass modern pull on 4 inch centers, or the Deltana SBP35 modern square bar pull at 3-1/2 inches. If you want steel rather than brass, the Orca Hardware CK-12001 T-pull bar is a 2 inch bar width in satin nickel.
8) Can I use the Schaub 975S on drawers as well as cabinet doors?
Yes, it is a two-screw cabinet pull, so it mounts the same way on a drawer front or a door face. On wide drawers people often run it horizontally and on doors vertically; the 5 inch hole spacing is the same either way. For small 3 inch or 3-1/2 inch drawer layouts you would need a shorter pull, such as the Trimco 553 at 3 inch CTC or the Trimco 562 in 3-1/2 inch, 4 inch, or 96mm.
9) Can I get the Schaub Sunburst design under the Emtek brand?
Emtek sells cabinet hardware under a Schaub Collection banner, including the Emtek 8405 Select cabinet pulls and the Emtek Alexander, Art Deco, and Bar cabinet pulls. Those are separate series names, not the Sunburst pattern, so if the Sunburst face is what the design calls for, the Schaub 975S is the item to order rather than an Emtek series.
10) For a commercial casework job, is the Orca CK-12001 T-pull an alternative to the Schaub 975S?
They serve different jobs. The Schaub 975S is a decorative solid brass pull from the Sunburst collection offered in Estate Dover, Hi-Lited Luminescent Bronze, and Silver Antique finishes. The Orca Hardware CK-12001 is a T-pull bar with a 2 inch bar width in steel with a satin nickel finish. If the specification is residential-grade decorative brass, the 975S matches it; if the casework wants a plain steel bar pull, the CK-12001 is the closer fit.
11) Which alternatives match the Schaub 975S on projection off the face of the door?
The Schaub 975S projects 1-5/8 inch from the face. Among comparable forged solid brass modern pulls, the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection and the Omnia 1970 a 1-1/4 inch projection, so all three sit closer to the door face than the 975S. That matters where a drawer passes an adjacent appliance or a door swings near a return wall.
12) Can I match the Schaub Sunburst pull with other pieces from the same design line?
The 975S belongs to Schaub's Sunburst collection within the Symphony Elegance style line, so it coordinates with the other Sunburst pieces in that family. If you want the look in Emtek's catalog instead, Emtek sells the Schaub Collection under its own numbering, including the Emtek 8405 Select cabinet pulls.
How fast can I get the Schaub SCH-975S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub SCH-975S come with a warranty?
Absolutely. The Schaub SCH-975S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub SCH-975S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub SCH-975S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!