Schaub 79-15 Steamworks Applia...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$275.00
$159.31
Schaub 79-15 Steamworks 15" Appliance Pull

Schaub 79-15 Steamworks Appliance Pull, 15" CTC Zinc, Transitional Style

(No reviews yet) Write a Review

Model: 79-15-15
From the Steamworks Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$275.00
$159.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 79-15 Steamworks Appliance Pull, 15" CTC Zinc, Transitional Style

The Schaub 79-15 Steamworks Appliance Pull is a Transitional style pull from the Steamworks collection, built to function as a dependable appliance pull for kitchen and bath cabinetry. This pull offers a 15" center-to-center spacing, a 17" overall length, and a 2-1/4" projection from the mounting surface, with a 1" base dimension and a zinc base material suited for everyday handling. The 1/4 x 20 thread size supports standard mounting hardware for straightforward installation on appliance and cabinet fronts.

Key Features

  • Center-to-Center Spacing: 15" center-to-center mounting dimension for precise appliance pull installation.
  • Overall Length and Projection: 17" overall length paired with a 2-1/4" projection for comfortable grip clearance.
  • Base Dimension: 1" base dimension provides a substantial presence on appliance and cabinet fronts.
  • Zinc Construction: Zinc base material forms a sturdy foundation suited for frequent use.
  • Thread / Screw Size: 1/4 x 20 mounting thread compatible with standard installation hardware.
  • Transitional Style: Part of the Steamworks collection, blending clean modern lines with classic design elements.
  • Appliance Pull Function: Designed specifically as an appliance pull for refrigerators, ovens, and other large appliance fronts as well as oversized cabinet doors.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 1/4 x 20"
  • Overall: 17"
  • Product Dimension: 1"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 15"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry and Appliances
  • Bathroom Vanities and Cabinetry
  • Residential Remodeling Projects
  • Custom Cabinetry Installations
  • Hospitality Interiors
  • Multi-Family Residential Properties

Why Schaub Steamworks?

Schaub Steamworks hardware combines a zinc base material with Transitional style design, offering a dependable option for kitchen and bath appliance and cabinet fronts. With precise 15" center-to-center spacing, a 17" overall length, and a 2-1/4" projection, this appliance pull is built to provide consistent function and a cohesive look when paired with coordinating pieces from the Steamworks collection. The zinc construction and 1/4 x 20 mounting thread make it a practical, long-lasting choice for residential and light commercial cabinetry projects alike.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Steamworks
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
1/4 x 20"
Overall:
17"
Product Function:
Appliance Pull
Product Dimension:
1"
Product Projection:
2-1/4"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
15"
Department:
Door Hardware

Schaub 79-15-15 – Frequently Asked Questions

1) What hole spacing do I need to drill for the Schaub 79-15 appliance pull?
Drill on 15 inch centers. The Schaub 79-15 Steamworks appliance pull is a 15 inch center-to-center pull with a 17 inch overall length, so it overhangs the mounting holes by about an inch on each end. Fasteners are 1/4-20 thread, which is the standard appliance pull screw size and heavier than the 8-32 used on ordinary cabinet pulls.
2) Will the Schaub 79-15 mount back to back on a glass or double-sided door?
Yes. The 79-15 Steamworks pull is ordered either as a single pull or in a back-to-back configuration, where two pulls share through-bolted 1/4-20 fasteners. Pick the Back to Back option when you need a grip on both faces, such as a swinging pantry door or a panel accessible from two sides; pick the single version for a standard refrigerator or dishwasher panel.
3) How far does the Schaub Steamworks 15 inch pull stick out from the appliance panel?
Projection is 2-1/4 inches, measured from the panel face to the back of the grip. That is deep enough to get a full hand behind it with a glove on, which is what you want on a heavy refrigerator panel, but check your clearance if the appliance sits next to a perpendicular wall or an island run where a deep pull would catch traffic. The posts measure 1 inch.
4) What is the closest alternative to the Schaub 79-15 appliance pull if the same collection styling is needed on smaller cabinet doors?
The Schaub 79-15 Steamworks pull is a 15 inch center-to-center appliance pull, 17 inch overall, with a 2-1/4 inch projection and 1/4 x 20 threaded studs, so it is sized for refrigerator and freezer panels rather than base cabinets. For drawers and doors in the same job, the Emtek 8405 Select cabinet pulls are offered in the Schaub collection, as are the Emtek Bar, Alexander, and Art Deco cabinet pulls, all catalogued as cabinet knob/pull function. Those give you a smaller-scale pull line drawn from the same Schaub design program.
5) Can the Omnia 1968/102 or Trimco 553 be used in place of the Schaub 79-15?
No, they are not interchangeable. The Schaub 79-15 mounts on 15 inch centers with 1/4 x 20 studs. The Omnia 1968/102 is a modern cabinet pull with 4 inch center-to-center spacing, and the Trimco 553 series drawer pulls are 3 inch center-to-center, so neither will land on the existing 15 inch bore pattern of an appliance panel. Use them for drawers and small doors, not as a swap for the appliance pull.
6) What finishes does the Schaub 79-15 Steamworks appliance pull come in?
Four finishes: Satin Nickel (SN), Brushed Bronze (BBZ), Distressed Pewter/Copper (DPC), and Empire Bronze (EBZ). All four are offered in both the single and back-to-back configurations, so a kitchen mixing a fridge panel and a two-sided pantry door can stay consistent.
7) Is a 15 inch appliance pull the right size for a refrigerator panel, or should I go with a cabinet pull?
An appliance pull is the right call for refrigerator, freezer, and dishwasher panels: it uses 1/4-20 through-bolts instead of the lighter 8-32 machine screws on cabinet pulls, because the door is heavy and gets yanked. The 79-15 spans 15 inches on center, 17 inches overall. For drawers and cabinet doors alongside it, standard cabinet pulls in the 3 to 4 inch center range are the norm, such as the Trimco 553 Series at 3 inch ctc or the Trimco 562 Series at 3-1/2 inch, 4 inch, and 96mm.
8) If the Schaub 79-15 projects too far off the appliance panel, what pulls have a shallower projection?
The Schaub 79-15 Steamworks pull stands 2-1/4 inches off the face. Where clearance is tight against an adjacent wall or run, the Omnia 1970 modern cabinet pull is forged solid brass with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass at 1-3/16 inch projection. Those are cabinet-scale pulls, so confirm the bore spacing you need before specifying one on an appliance panel.
9) How does the Schaub 79-15 differ from a solid brass pull like the Deltana SBP35?
Material and scale are the two differences that matter. The Schaub 79-15 is a zinc-base appliance pull in the transitional Steamworks collection at 15 inch center-to-center. The Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inches, from the SBP series. The Deltana is a small cabinet-scale bar pull, so it is a companion piece rather than a replacement for a 15 inch appliance pull.
10) Is the Orca CK-12001 T-pull bar an equivalent to the Schaub 79-15 appliance pull?
They serve different looks and constructions. The Orca CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, from the 12-Bar pull series. The Schaub 79-15 is a zinc appliance pull in the transitional Steamworks collection with a 2-1/4 inch projection and a 1 inch base dimension, offered in Satin Nickel, Brushed Bronze, Distressed Pewter/Copper, and Empire Bronze. If the satin nickel finish is the only requirement, both offer it; if the Steamworks styling or the 15 inch mounting is the requirement, the Schaub is the one to hold.
11) For a back-to-back glass or panel application, is the Schaub 79-15 or the Trimco 562 the right choice?
The Schaub 79-15 Steamworks pull is ordered in a back-to-back configuration as well as single-sided, at 15 inch center-to-center with 1/4 x 20 threads. The Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center-to-center options, which is drawer scale. For a long paired-through installation, the 79-15 back-to-back option is the one that covers it.
12) Can I match the Steamworks appliance pull with smaller pulls on the rest of the cabinets?
Steamworks is the collection name, and it is a transitional style, so it reads with both traditional and contemporary door fronts. Schaub designs are also carried under the Emtek Schaub Collection, including the Emtek Bar, Alexander, and Art Deco cabinet pulls, if you are building out drawer and door hardware around the appliance pull.
13) Does the Schaub 79-15 come with mounting screws long enough for a thick appliance panel?
The pull uses 1/4-20 threaded fasteners. Panel thicknesses vary widely between integrated appliance fronts, so confirm the screw length against your actual panel before install; 1/4-20 machine screws in the length you need are a stock item and easy to swap.
14) What should be used on cabinet doors alongside the Schaub 79-15 if a knob is preferred to a pull?
The Schaub 79-15 is a pull-only appliance piece at 15 inch center-to-center. For knobs on the surrounding cabinetry, the Orca Bachelor Collection CK-15030 is a 1-1/4 inch diameter round cabinet knob and the CK-16030 is a 1-1/4 inch diameter round ring knob; the Orca Blackcomb CK-17025 is a 25mm square cabinet knob. All three are single-hole knobs, so they will not reuse a two-bore pull pattern.
How fast can I get the Schaub 79-15-15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 79-15-15 come with a warranty?
Absolutely. The Schaub 79-15-15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 79-15-15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 79-15-15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!