Schaub 79-8 Steamworks 8" Zinc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$38.00
$21.86
Schaub 79-8 Steamworks 8" Cabinet Pull

Schaub 79-8 Steamworks 8" Zinc Cabinet Pull with 1-3/8" Projection

(No reviews yet) Write a Review

Model: 79-8-15
From the Steamworks Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$38.00
$21.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 79-8 Steamworks 8" Zinc Cabinet Pull with 1-3/8" Projection

The Schaub 79-8 Steamworks 8" Zinc Cabinet Pull is a transitional style cabinet pull built from zinc base material, designed to function as a dependable pull for kitchen, bath, and other cabinetry applications. This pull features an 8" center-to-center mounting spacing, a 9-1/4" overall length, a 5/8" base dimension, and a 1-3/8" projection for comfortable use. As part of the Steamworks collection, the 79-8 pull combines classic cabinet hardware proportions with a transitional design that works well alongside a variety of cabinet door and drawer styles.

Key Features

  • Center-to-Center Spacing: 8" center-to-center spacing is sized to match standard cabinet pull drilling patterns for straightforward installation.
  • Projection: 1-3/8" projection from the mounting surface provides comfortable finger clearance for everyday opening and closing.
  • Overall Length: 9-1/4" overall length is proportioned for an 8" center-to-center cabinet pull.
  • Base Dimensions: 5/8" base dimension creates a stable mounting footprint at each post.
  • Zinc Base Material: Zinc base material construction is used throughout the Steamworks 79-8 pull for a sturdy, long-wearing cabinet hardware piece.
  • Transitional Style: Styling from the Steamworks collection delivers a transitional look that can complement both traditional and contemporary cabinetry.
  • Thread / Screw Size: This pull specifies an 8/32 thread size for its mounting posts.
  • Cabinet Pull Function: Designed specifically as a cabinet pull, suited for doors and drawers throughout the kitchen, bath, or other cabinetry.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 8/32"
  • Product Function: Appliance Pull
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 8"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Remodels
  • Commercial Cabinetry Projects
  • Furniture and Built-In Storage
  • Multi-Family Housing Developments
  • Custom Millwork Installations

Why Schaub 79-8?

Schaub 79-8 Steamworks cabinet pulls are built from zinc base material for dependable everyday performance across kitchen and bath cabinetry. With an 8" center-to-center spacing, a 9-1/4" overall length, a 5/8" base dimension, and a 1-3/8" projection, this pull is proportioned to fit standard cabinet pull applications while bringing the transitional styling of the Steamworks collection to any project.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Steamworks
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32"
Overall:
9-1/4"
Product Function:
Appliance Pull
Product Dimension:
5/8"
Product Projection:
1-3/8"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
8"
Department:
Door Hardware

Schaub 79-8-15 – Frequently Asked Questions

1) Will the Schaub 79-8 Steamworks pull fit my existing 8 inch cabinet hardware holes?
Yes, if your existing holes are drilled 8 inches apart. The 79-8 Steamworks pull is an 8 inch center-to-center pull, so it drops onto an existing 8 inch bore pattern with no new drilling. Overall length is 9-1/4 inches, meaning it extends about 5/8 inch past each screw hole, so allow a bit of clearance at both ends on a narrow drawer face or appliance panel.
2) What screws does the Schaub 79-8 Steamworks pull take, and will longer ones work for a thick appliance panel?
The 79-8 uses 8-32 machine screws, which is the standard cabinet hardware thread. That matters on an appliance pull: refrigerator and dishwasher panels are usually thicker than a standard 3/4 inch drawer front, so you may need longer 8-32 screws than the ones packed with a typical pull. Any 8-32 machine screw in the right length threads straight into the posts.
3) I need a matching pull for my 3 or 4 inch drawers, not an 8 inch appliance pull. What else is there?
The 79-8 only comes at 8 inch center-to-center, so it will not cover a standard drawer bore. For shorter center distances, the Trimco 553 Series drawer pull is 3 inch ctc and the Trimco 562 Series comes in 3-1/2 inch, 4 inch and 96mm ctc. The Deltana SBP Series square bar pull is 3-1/2 inch. Those are different designs, so if visual match across the run matters more than exact spacing, look at a shorter pull within the Steamworks collection instead.
4) I am replacing a broken 8 inch refrigerator panel pull in a rental unit. Is this a direct swap?
If the old pull was 8 inch center-to-center and used 8-32 screws, the 79-8 lands on the same holes with the same screws. Check the footprint before you commit: the Steamworks pull has a 5/8 inch base where the posts meet the panel, so if the pull you are removing had wide decorative feet, it may leave marks or unfinished panel showing outside that footprint.
5) What is a straight alternative to the Schaub 79-8 Steamworks pull if I want an 8 inch appliance-size pull in solid brass instead of zinc?
The Schaub 79-8 Steamworks pull is a transitional-style cabinet pull with a zinc base material, 8 inch center-to-center spacing and a 9-1/4 inch overall length, used as an appliance pull. If solid brass construction is the requirement, the Omnia 1968/102 is a forged solid brass cabinet pull, though it is built on 4 inch center-to-center spacing, so the mounting holes will not line up with an existing 8 inch bore pattern. Omnia also builds the 1969, 1970 and 1971 modern cabinet pulls in forged solid brass. Confirm center-to-center before ordering any of them against an existing drilled door or drawer front.
6) I have 3 inch and 4 inch drawer bores already drilled. Can I use the Schaub 79-8 Steamworks pull, or do I need something else?
No. The Schaub 79-8 Steamworks pull is drilled on 8 inch center-to-center spacing, so it will not land on a 3 or 4 inch bore pattern without redrilling the drawer front. For those existing holes, the Trimco 553 series drawer pulls are built on 3 inch center-to-center, and the Trimco 562 series offers 3-1/2 inch, 4 inch and 96mm center-to-center options. The Omnia 1968/102 is also a 4 inch center-to-center pull. A common approach is the 79-8 on the appliance and dishwasher panels where the long pull suits the panel height, with a shorter-bore pull on the surrounding drawers.
7) Is the Schaub 79-8 an appliance pull or just a large cabinet pull?
It is built as an appliance pull. At 8 inches center-to-center and 9-1/4 inches overall, the Steamworks 79-8 is sized for refrigerator and dishwasher panels, large pantry doors, and oversized drawer fronts rather than a standard 3 or 4 inch drawer. If you want the same Steamworks look on smaller drawers, you would pair it with a shorter pull from the same collection.
8) What finishes does the Schaub 79-8 Steamworks pull come in?
Four: Satin Nickel (SN), Brushed Bronze (BBZ), Distressed Pewter/Copper (DPC), and Empire Bronze (EBZ). Distressed Pewter/Copper is the two-tone finish that gives the Steamworks line its industrial look; if you are matching existing hardware across a kitchen or a unit turnover, order all openings in one finish code at once, since hand-applied and distressed finishes vary between production runs.
9) Is the Schaub 79-8 solid brass or plated?
The base material is zinc, not solid brass, with the finish applied over it. That is a normal construction for a decorative appliance pull and it keeps the weight down on a long 9-1/4 inch bar. If your spec calls for solid brass, the Deltana SBP Series square bar pull and the Omnia 1968, 1969, 1970 and 1971 Series pulls are forged or solid brass options, though they are different styles and shorter center distances.
10) For a run of cabinet doors where an 8 inch pull is too long, what should I use instead of the Schaub 79-8?
The Schaub 79-8 Steamworks pull runs 9-1/4 inch overall on 8 inch centers, which suits appliance panels and tall drawer fronts more than a small door. For shorter openings, the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch, and the Trimco 553 series runs 3 inch center-to-center. If a knob suits the door better than a pull, the Orca Hardware CK-15030 and CK-16030 Bachelor Collection knobs are 1-1/4 inch diameter round, and the CK-17025 Blackcomb Collection knob is a 25mm square. Knobs take a single bore rather than the two-hole pattern the 79-8 requires.
11) Will the Schaub Steamworks pull look right with modern flat-panel cabinets, or is it too traditional?
Transitional is the style, which is the middle ground: it works on shaker and flat-panel doors alike without reading as either strictly modern or period. If you want a fully modern look, the Omnia 1968 through 1971 Series and the Orca CK-12001 T-pull bar are modern-styled bar pulls. For period work, the Emtek Art Deco and Alexander cabinet pulls from the Schaub Collection are the traditional direction.
How fast can I get the Schaub 79-8-15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 79-8-15 come with a warranty?
Absolutely. The Schaub 79-8-15 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 79-8-15?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 79-8-15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!