Schaub 883 Empire Cabinet Pull...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$22.00
$12.91
Schaub 883 3-1/2" Center to Center Empire Cabinet Pull

Schaub 883 Empire Cabinet Pull with 3-1/2" Center to Center and Zinc Construction

(No reviews yet) Write a Review

Model: 883-AN
From the Empire Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$22.00
$12.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 883 Empire Cabinet Pull, 3-1/2" Center to Center and Zinc Construction

Schaub presents the 883 Empire Cabinet Pull, a transitional style cabinet pull from the Empire collection measuring 3-1/2" center to center with a 4" overall length. Constructed from zinc with a 1-1/4" projection and a 7/8" base dimension, this pull mounts using an 8/32 x 1" thread screw size for secure attachment to cabinet doors and drawers. Designed for cabinet pull function, it delivers a clean transitional profile suited for kitchen, bath, and cabinetry applications where a balance of classic and contemporary styling is desired.

Key Features

  • Center to Center: 3-1/2" spacing provides accurate alignment for standard cabinet drawer and door mounting hole patterns.
  • Overall Length: 4" total pull length offers a comfortable, balanced grip for everyday cabinet use.
  • Projection: 1-1/4" projection from the mounting surface allows comfortable hand clearance.
  • Base Dimensions: 7/8" base footprint provides a stable, finished mounting point at each end.
  • Base Material: Zinc construction supports consistent, everyday cabinet hardware performance.
  • Style: Transitional design bridges traditional and modern cabinetry aesthetics.
  • Collection: Part of the Empire collection from Schaub, designed for coordinated cabinetry hardware schemes.
  • Thread / Screw Size: 8/32 x 1" for compatible cabinet mounting applications.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 4"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Pieces
  • Commercial Cabinetry Installations
  • Hospitality Interior Design
  • Retail Display Fixtures
  • Office Cabinetry

Why Schaub 883?

Schaub 883 Empire cabinet pulls combine zinc construction with a transitional design that complements a wide range of cabinetry styles. Precise 3-1/2" center to center spacing paired with a 1-1/4" projection make this pull a dependable, professional grade choice for everyday cabinet hardware needs across residential and commercial settings. The Empire collection design detailing offers a coordinated look when paired with matching Schaub cabinet hardware throughout a kitchen or bath project.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Empire
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Overall:
4"
Product Dimension:
7/8"
Product Projection:
1-1/4"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
3-1/2"
Department:
Door Hardware

Schaub 883-AN – Frequently Asked Questions

1) Will the Schaub 883 Empire pull drop into existing cabinet holes drilled 3-1/2 inches apart?
Yes. The Empire 883 pull is drilled 3-1/2 inches center to center, so it lines up with an existing pair of holes at that spacing (96mm holes will not line up, they are about 3-3/4 inches). Overall length is 4 inches, so it only overhangs the mounting holes by about a quarter inch total.
2) Is the Schaub 883 Empire pull solid brass or plated zinc?
The base material is zinc, finished in the Empire collection's plated and coated finishes. If a project spec calls for solid brass, look at the Omnia 1970 or Omnia 1969 modern cabinet pulls, both forged solid brass, or the Deltana SBP35 square bar pull in solid brass at the same 3-1/2 inch spacing.
3) What is a solid brass alternative to the Schaub 883 Empire pull at the same 3-1/2 inch center-to-center?
The Schaub 883 Empire pull is a zinc-base cabinet pull with 3-1/2 inch center-to-center spacing. If a solid brass body is required for the spec, the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass pull also at 3-1/2 inch center-to-center. The Deltana is a modern square bar profile rather than the transitional Empire shape, so it reads differently on the door face even though the hole spacing matches.
4) If existing cabinet doors are drilled at 3 inch centers, what pull works instead of the Schaub 883?
The Schaub 883 Empire pull is fixed at 3-1/2 inch center-to-center, so it will not land on holes drilled at 3 inches. For a 3 inch drilling, the Trimco 553 Series drawer pull is offered at 3 inch center-to-center. If some doors in the run are at 3-1/2 inches and others are not, the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm center-to-center so one series can serve mixed drillings.
5) What should I use if the cabinet run needs 4 inch center-to-center pulls instead of 3-1/2 inch?
The Schaub 883 Empire pull is built only at 3-1/2 inch center-to-center. For a 4 inch drilling, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Trimco 562 Series lists a 4 inch center-to-center option as well.
6) Can I use an Orca Bachelor knob in place of the Schaub 883 Empire pull?
No, those are not interchangeable. The Schaub 883 is a two-hole cabinet pull with 3-1/2 inch center-to-center spacing. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection pieces are 1-1/4 inch diameter cabinet knobs, and the CK-17025 Blackcomb is a 25mm square cabinet knob. A knob mounts on a single hole, so swapping one in leaves the second 883 hole exposed and requires re-drilling or a backplate.
7) What size screws come with the Schaub 883 Empire cabinet pull, and will they work on thicker drawer fronts?
It takes 8/32 screws at 1 inch long, which is the standard machine screw for cabinet pulls and suits typical 3/4 inch fronts with room to spare. If you are mounting through a thicker applied front or a drawer box face, you will need longer 8/32 screws, since the thread size stays the same but 1 inch will not reach.
8) What finishes does the Schaub Empire 883 pull come in for matching a whole kitchen?
Ten finishes: Satin Nickel, Polished Chrome, Ancient Bronze, Antique Nickel, Brushed Bronze, Brushed Nickel, Empire Bronze, Matte Black, Polished Nickel, and Signature Satin Brass. Empire Bronze is the collection's own bronze tone, so if you are matching other Empire pieces already installed, specify that code rather than assuming any bronze will match.
9) Will a 3-1/2 inch Empire pull look right on a narrow drawer or a cabinet door stile?
At 4 inches overall it fits most standard drawer fronts and door stiles without crowding. On a narrow pull-out or spice drawer, measure the flat area first, and if 4 inches is tight, a knob is the safer call, such as the Orca Bachelor round cabinet knob at 1-1/4 inch diameter.
10) I need the same look on drawers at a wider hole spacing. What matches the Schaub 883?
The 883 itself is the 3-1/2 inch center to center size in the Empire collection, so for wider drawers order the matching Empire pull in the larger center to center size and keep the same finish code. If you need a different family entirely at mixed spacings, the Trimco 562 Series drawer pulls run 3-1/2 inch, 4 inch, and 96mm ctc.
11) Which cabinet pull matches the Schaub 883 Empire projection off the door face?
The Schaub 883 Empire pull projects 1-1/4 inch from the door face. The Omnia 1970 modern cabinet pull is a forged solid brass pull with the same 1-1/4 inch projection, so hand clearance and any adjacent appliance or wall clearance behaves the same. The Omnia 1969 and Omnia 1971 both sit slightly closer at 1-3/16 inch projection if a shallower reveal is wanted.
12) For a high-traffic commercial or multi-family cabinet install, is there a sturdier option than the Schaub 883?
The Schaub 883 Empire pull uses a zinc base material and mounts with 8/32 x 1 inch screws. Where a heavier body is wanted for turnover units or shared kitchens, the Deltana SBP35 is described as heavy-duty solid brass at 3-1/2 inch center-to-center, and the Omnia 1969, 1970, and 1971 pulls are forged solid brass. The Orca Hardware CK-12001 T-pull bar is a steel pull with a 2 inch bar width in satin nickel, a plainer bar profile than the Empire shape.
13) Is the Schaub 883 a modern pull or will it suit a traditional cabinet door?
It is classed transitional, which means it reads clean enough for a shaker or slab door but is not as stark as a straight square bar pull. If you want strictly modern, the Omnia 1968/102 or the Orca CK-12001 T-bar are squarer takes; for a period look, the Emtek Art Deco cabinet pull from the Schaub collection is the ornamental end of the range.
14) What is the 7/8 inch dimension listed on the Schaub Empire 883 pull?
That is the base dimension of the pull, the footprint where it meets the cabinet face. It matters when you are covering old hardware marks or working around a rail edge, since the 4 inch overall length is the grip and the 7/8 inch figure is the mounting base.
How fast can I get the Schaub 883-AN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 883-AN come with a warranty?
Absolutely. The Schaub 883-AN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 883-AN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 883-AN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!