Schaub 886 Empire Cabinet Pull...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.00
$31.09
Schaub 886 10" Center to Center Empire Cabinet Pull

Schaub 886 Empire Cabinet Pull, 10" Center to Center, Zinc

(No reviews yet) Write a Review

Model: 886-SSB
From the Empire Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.00
$31.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub Empire Cabinet Pull, 10" Center to Center, Zinc

The Schaub Empire Cabinet Pull brings transitional style to kitchen and bathroom cabinetry, featuring a 10" center to center measurement and a 10-1/2" overall length. Finished in zinc base material, this pull offers a 1-1/4" projection and a 7/8" base dimension for a comfortable, secure grip on every cabinet door or drawer. Part of the Empire collection, it mounts using 8/32 x 1" screws for a clean, coordinated installation throughout the kitchen or bath.

Key Features

  • Center to Center: 10" center to center spacing allows for straightforward installation and coordination with existing cabinet hardware layouts.
  • Overall Length: 10-1/2" overall length provides ample surface area for a comfortable grip.
  • Projection: 1-1/4" projection offers practical clearance from the cabinet surface for everyday use.
  • Base Dimensions: 7/8" base dimension supports a stable, secure mounting point.
  • Zinc Construction: Zinc base material delivers reliable everyday durability for cabinet pulls.
  • Empire Collection, Transitional Style: Part of the Empire collection, designed in a transitional style that complements a range of kitchen and bath aesthetics.
  • Thread / Screw Size: 8/32 x 1" mounting screw specification for compatible installation.
  • Transitional Design: The Empire collection's transitional style bridges classic and contemporary cabinetry, suiting a wide range of kitchen and bath design schemes.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 10"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture and Built-ins
  • Residential Remodeling Projects
  • Commercial Millwork
  • Multi-Family Housing Developments
  • New Construction Cabinetry Installations

Why Schaub Empire?

The Schaub Empire Cabinet Pull combines zinc base construction with precise 10" center to center spacing for dependable, coordinated cabinet hardware across a project. Its transitional styling, 1-1/4" projection, and 7/8" base dimension make it a practical choice for kitchen and bath cabinetry projects that call for consistent, quality hardware throughout every room.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Empire
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Overall:
10-1/2"
Product Dimension:
7/8"
Product Projection:
1-1/4"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
10"
Department:
Door Hardware

Schaub 886-SSB – Frequently Asked Questions

1) What size screws come with the Schaub 886 Empire cabinet pull, and will they work on a thicker drawer front?
The Empire 886 pull mounts with 8/32 x 1 inch screws. That 1 inch length covers a standard 3/4 inch drawer front or door with thread left to engage the post. If you are pulling it onto a thicker slab, a stacked front, or a front with an applied panel, you need longer 8/32 machine screws, since the thread size is the same but the length runs out fast.
2) Will a Schaub 886 pull fit holes already drilled for a 10 inch center to center pull?
Yes. The 886 Empire pull is drilled on 10 inch centers, so it drops onto an existing pair of holes bored at 10 inches apart with no new drilling. Overall length is 10-1/2 inches, so only about a quarter inch of pull extends past each hole, which means the old pull's footprint has to be smaller than that or you may see previous finish shadow on the front.
3) What cabinet pull matches the Schaub 886 Empire pull if the drawer is too narrow for a 10 inch center to center pull?
The Schaub 886 Empire pull is set at 10 inch center to center with a 10-1/2 inch overall length, which needs a wide drawer face. For narrower fronts, the Omnia 1968/102 modern cabinet pull is a forged solid brass pull with 4 inch center to center spacing, and the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center to center options. The Trimco 553 series is a 3 inch center to center drawer pull for the smallest fronts. Any of these changes the bore spacing, so the drilling on the drawer front has to match the pull you choose.
4) Which cabinet pull has the same 1-1/4 inch projection as the Schaub 886 Empire pull?
The Schaub 886 Empire pull projects 1-1/4 inch off the face of the door or drawer. The Omnia 1970 modern cabinet pull is a forged solid brass pull with the same 1-1/4 inch projection, so hand clearance to an adjacent wall, appliance, or return is the same. The Omnia 1969 and Omnia 1971 sit slightly closer to the face at 1-3/16 inch projection. Projection is the spec to check when cabinets run into a corner or up against a range.
5) How much clearance do I need behind a Schaub Empire 886 pull for gripping with a gloved hand?
Projection is 1-1/4 inches off the face of the door or drawer, with a 7/8 inch base dimension. That 1-1/4 inch stand-off leaves room to get a full hand behind the bar, which matters on a heavy pantry or appliance-style door. It also means the pull sits proud enough to catch a passing hip or a cart in a tight galley, so check your aisle before you specify it in a rental or hospitality kitchen.
6) Is the Schaub 886 pull long enough for a full height pantry or appliance panel door?
At 10 inch centers and 10-1/2 inches overall, the 886 Empire is in appliance panel and tall pantry territory rather than drawer territory. It works on a wide bank of deep drawers too, but on a 12 inch wide drawer front it will run nearly edge to edge. Measure the front before committing to the 10 inch size.
7) What finishes does the Schaub 886 Empire pull come in for matching an existing kitchen?
Ten finishes: Satin Nickel (SN), Polished Chrome (PC), Ancient Bronze (ABZ), Antique Nickel (AN), Brushed Bronze (BBZ), Brushed Nickel (BN), Empire Bronze (EBZ), Matte Black (MB), Polished Nickel (PN), and Signature Satin Brass (SSB). If you are matching across a unit or a whole property, order the finish code, not the finish name, since Satin Nickel and Brushed Nickel and Antique Nickel are three separate finishes here.
8) I need matching pulls in a smaller size for the drawers. Does the Empire collection cover shorter centers?
The 886 itself is one size, 10 inch center to center. It is part of Schaub's Empire collection, so the way to keep a consistent look across shorter drawers is to stay in Empire and pick the shorter center sizes in that collection rather than mixing profiles. If you need a distinctly shorter pull from another line, the Trimco 562 Series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm centers, and the Trimco 553 Series is 3 inch centers.
9) Is there a solid brass alternative to the zinc Schaub 886 Empire cabinet pull?
The Schaub 886 Empire pull is built on a zinc base material. If a solid brass body is required for the job, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inches, and the Omnia 1969, 1970, and 1971 modern cabinet pulls are forged solid brass. Note that these are shorter bar-style pulls rather than a 10 inch center to center transitional pull, so the drawer front layout and bore spacing change with the swap.
10) Can a cabinet knob be used instead of the Schaub 886 Empire pull on smaller doors?
The Schaub 886 is a two-bore pull at 10 inch center to center, so it suits wide drawer fronts. On small cabinet doors where a single-bore knob is wanted instead, the Orca Hardware Bachelor collection CK-15030 is a round cabinet pull knob at 1-1/4 inch diameter, the CK-16030 is the round ring version at the same 1-1/4 inch diameter, and the Blackcomb collection CK-17025 is a square cabinet pull knob at 25mm diameter. A knob is a single hole rather than the two-hole layout the 886 requires, so switching between them means re-drilling the front.
11) Will a Schaub Empire pull look right in a transitional kitchen next to modern hardware?
Empire is a transitional style, so it reads between traditional and modern and generally sits fine alongside either. If the rest of the job is strictly modern bar hardware, straight-bar options like the Omnia 1968/102 or the Orca Hardware CK-12001 T-Pull Bar are the cleaner match visually. Mixing a transitional pull into an all-modern run usually shows.
12) Is the Orca CK-12001 T-pull bar a substitute for the Schaub 886 Empire cabinet pull?
They are not interchangeable on looks or material. The Schaub 886 is a transitional Empire pull on a zinc base with a 7/8 inch base dimension and 8/32 x 1 inch screws. The Orca Hardware CK-12001 is a T-pull bar in the 12-Bar Pull series, built in steel with a 2 inch bar width and supplied in satin nickel only. If the requirement is a matched transitional look across a kitchen, the T-pull bar reads as a different design family.
13) Is the SDC SP50 spindle related to the Schaub 886 Empire cabinet pull?
No. The Schaub 886 is a cabinet pull that mounts to a drawer or door front with 8/32 x 1 inch screws at 10 inch center to center. The SDC SP50 is a 50mm spindle and its function is door controls, meaning it is a component for a door lockset or exit device, not cabinet hardware. Ordering it as a pull replacement will not produce anything that mounts to a cabinet.
How fast can I get the Schaub 886-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 886-SSB come with a warranty?
Absolutely. The Schaub 886-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 886-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 886-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!