Schaub Urbano 211005 Cabinet P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$77.00
$44.88
Schaub 211005 18" Center to Center Urbano Cabinet Pull Schaub 211005

Schaub Urbano 211005 Cabinet Pull, 18" Center to Center, Zinc

(No reviews yet) Write a Review

Model: 211005-BN
From the Urbano Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$77.00
$44.88
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub Urbano 211005 Cabinet Pull, 18" Center to Center, Zinc

The Schaub Urbano 211005 Cabinet Pull brings a clean, contemporary look to kitchen, bath, and custom cabinetry with an 18" center to center hole spacing and an 18-1/2" overall length. Constructed from zinc, this pull features a 1" projection and 7/8" base dimensions, making it a versatile choice for cabinet doors and drawers that call for a modern silhouette. Part of the Urbano collection, this pull mounts using an M4 thread / screw size and is sized to replace existing hardware with matching hole spacing.

Key Features

  • Center to Center Spacing: 18" center to center hole spacing with an 18-1/2" overall length simplifies planning, layout, and replacement on existing cabinetry.
  • Contemporary Urbano Design: Part of the Urbano collection, this pull offers a clean contemporary style suited to modern kitchens, baths, and furniture.
  • Zinc Construction: Built from zinc for everyday durability on cabinet doors and drawers.
  • Comfortable Projection: A 1" projection from the mounting surface provides a comfortable grip for daily use.
  • Compact Base Dimensions: 7/8" base dimensions allow for a refined, low-profile mounting footprint.
  • Thread / Screw Size: M4 thread / screw size for mounting to standard cabinet doors and drawers.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 18-1/2"
  • Thread / Screw Size: M4
  • Product Dimension: 7/8"
  • Product Projection: 1"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 18"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture and Casework
  • Residential Remodeling Projects
  • Commercial Cabinetry Installations
  • Office and Hospitality Casework

Why Schaub Urbano 211005?

The Schaub Urbano 211005 Cabinet Pull combines a zinc base with precise 18" center to center spacing and an 18-1/2" overall length to deliver a dependable fit for contemporary cabinetry projects. Its 1" projection and 7/8" base dimensions are sized for comfortable everyday handling, while the Urbano collection design brings a clean, contemporary aesthetic to kitchens, baths, and other cabinetry applications where consistent hole spacing and a durable zinc build matter.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Urbano
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
18-1/2"
Thread / Screw Size:
M4
Product Function:
Cabinet Pull
Product Dimension:
7/8"
Product Projection:
1"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
18"
Department:
Door Hardware

Schaub 211005-BN – Frequently Asked Questions

1) What hole spacing do I need to drill for the Schaub Urbano 211005 cabinet pull?
Drill your two holes 18 inches apart on center. The Urbano 211005 is an 18 inch center-to-center pull with an overall length of 18-1/2 inches, so it only overhangs the mounting holes by about a quarter inch on each end. On a retrofit, existing holes have to be at 18 inches exactly or you will be patching and re-drilling the door or drawer front.
2) What screw size does the Schaub 211005 Urbano pull take, and will standard cabinet screws work?
It uses M4 metric machine screws, not the 8-32 thread common on a lot of North American cabinet hardware. If you are mixing this into a run of existing pulls, keep the M4 screws that come with it rather than reusing what came out of the old holes.
3) What is the closest alternative to the Schaub 211005 Urbano pull if I want solid brass instead of zinc?
The Schaub 211005 Urbano pull is a contemporary cabinet pull with a zinc base material and an 18 inch center-to-center. If solid brass construction is the priority, the Omnia 1969 and Omnia 1970 modern cabinet pulls are forged solid brass, with the 1969 listed at a 1-3/16 inch projection and the 1970 at 1-1/4 inch, against the Urbano's 1 inch projection. The trade-off is drilling: the Omnia pulls are separate series and you would need to confirm their center-to-center matches your existing 18 inch bores before swapping.
4) I need a much shorter pull for drawers, not an 18 inch appliance-length pull. What should I look at?
The Schaub 211005 Urbano runs 18 inches center-to-center and 18-1/2 inches overall, which suits tall doors and appliance panels rather than small drawers. For short drawer centers, the Trimco 553 Series drawer pull is 3 inch center-to-center, the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options, and the Deltana SBP35 is a 3-1/2 inch modern square bar pull in solid brass. The Omnia 1968/102 is a modern forged solid brass pull at 4 inch center-to-center.
5) How far does the Schaub Urbano pull stand off the cabinet face?
Projection is 1 inch, with a 7/8 inch base dimension on the posts. That gives roughly enough hand clearance for a gripped pull on an appliance panel while keeping the pull tight to the face in a galley or tight walkway. If you need more knuckle room, Omnia's modern pulls run deeper, the 1970 at 1-1/4 inch projection and the 1969 and 1971 at 1-3/16 inch.
6) What finishes does the Schaub Urbano 211005 pull come in?
Five: Polished Chrome (PC), Brushed Nickel (BN), Gun Metal (GM), Matte Black (MB), and Signature Satin Brass (SSB). That covers the usual matches for stainless appliances (BN), black or bronze plumbing (MB, GM), and warm brass packages (SSB).
7) Can I use the Urbano pull on a refrigerator or dishwasher panel?
That is the length it suits. An 18 inch center-to-center bar pull with a 1 inch projection mounts across a tall integrated appliance panel, and the two posts spread the load over 18 inches of the panel face. What decides it is your panel thickness and the fasteners: the pull threads M4, so you need M4 screws long enough for the panel you are drilling.
8) Can I use a cabinet knob instead of the Schaub 211005 Urbano pull?
A knob is a single-bore part and will not cover the two-hole drilling the Urbano needs at 18 inch center-to-center, so it is not a drop-in swap. If you are starting from undrilled fronts and want knobs, the Orca Hardware CK-15030 is a 1-1/4 inch round cabinet knob, the CK-16030 is a 1-1/4 inch round ring knob, and the CK-17025 is a 25mm square knob from the Blackcomb collection. On existing Urbano bores you would need to fill and re-drill.
9) Will the Urbano pull match other Schaub hardware in the same kitchen?
It is part of Schaub's Urbano collection in a contemporary style, so it coordinates with other Urbano pieces in the same finish. Emtek also sells the Schaub Collection under its own line, including the Emtek 8405 Select, Alexander, Art Deco and Bar cabinet pulls, if you are blending collections across a job.
10) Does the Schaub 211005 carry a California Proposition 65 warning?
Yes, Schaub publishes a Proposition 65 warning for this pull. If you are buying for a California job or a multi-family package, note it on your submittal.
11) I want a traditional or decorative look instead of the Urbano. What else is available?
The Schaub 211005 Urbano is a contemporary-style pull, offered in Polished Chrome, Brushed Nickel, Gun Metal, Matte Black, and Signature Satin Brass. For a more decorative profile, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are distinct series in the Schaub Collection, and the Omnia 1971 is a modern forged solid brass pull with a 1-3/16 inch projection.
12) The SDC SP50 spindle came up in a search for Schaub pull parts. Is it related?
No. The SDC SP50 is a 50mm spindle used in door control hardware, not cabinet hardware. The Schaub 211005 Urbano is a cabinet pull with M4 threads and mounts through the cabinet front. The SP50 has no role in mounting the Urbano.
How fast can I get the Schaub 211005-BN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 211005-BN come with a warranty?
Absolutely. The Schaub 211005-BN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 211005-BN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 211005-BN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!