Schaub 211004 12" Center to Center Urbano Cabinet Pull

It uses M4 metric machine screws, not the 8-32 screws common on US cabinet hardware. If you are reusing screws from an older pull, check the thread before you install, and order longer M4 screws if your drawer fronts are thicker than standard.

The Schaub 211004 Urbano pull is a zinc-based contemporary pull with a 12 inch center-to-center spacing. If the specification calls for solid brass instead, the Omnia 1968/102 is a modern cabinet pull in forged solid brass with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch. Both are substantially shorter than the Urbano's 12 inch spacing, so drilling would need to change on the doors and drawers.

Projection is 1 inch, with a 7/8 inch base dimension. That gives roughly an inch of hand clearance, which is enough for a gloved grip and keeps the pull clear of an adjacent wall or appliance panel in tight galley layouts.

Five: Polished Chrome (PC), Brushed Nickel (BN), Gun Metal (GM), Matte Black (MB), and Signature Satin Brass (SSB). For a multi-unit or whole-kitchen order, buy all of one finish code in a single order so the plating lot matches across the run.

That is exactly where the 12 inch size belongs. At 12 inches center-to-center and 12-1/2 inches overall, the Urbano is sized for refrigerator and dishwasher panels, tall pantry doors, and deep pot drawers. For standard base drawers and small doors, a much shorter pull such as a 3 inch or 3-1/2 inch center-to-center is the usual choice, like the Trimco 553 at 3 inch or the Deltana SBP35 at 3-1/2 inch.

They are not the same part, though they are related. The Schaub 211004 belongs to Schaub's Urbano collection and is a contemporary zinc pull with a 1 inch projection and M4 screws. The Emtek Bar Cabinet Pull is in Emtek's Schaub Collection under the Bar series, and Emtek also lists the Alexander, Art Deco, and SELECT 8405 series in that same collection. If a drawing calls out Urbano specifically, the Emtek Bar series is a different design line, not a rebadge of it.

Knobs are the common mix-up. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection pieces and the CK-17025 Blackcomb square piece are cabinet knobs at 1-1/4 inch and 25mm diameter respectively, mounting on a single hole. The Schaub 211004 Urbano is a two-hole pull drilled at 12 inch center-to-center, so a knob cannot drop into the same prep. The SDC SP50 spindle is a door control component, not cabinet hardware at all.

The Schaub 211004 Urbano has a 1 inch projection, which keeps knuckle clearance tight to the cabinet face. Among modern forged solid brass options, the Omnia 1969 and Omnia 1971 both list a 1-3/16 inch projection, and the Omnia 1970 lists 1-1/4 inch. Those give more hand room where a gloved grip or a heavy drawer is a factor.

The 211004 belongs to Schaub's Urbano collection in a contemporary style, so the way to keep a kitchen consistent is to stay within Urbano across the sizes and use the same finish code on every piece. If you want the Schaub look in a knob rather than a bar pull, the Emtek Select cabinet pulls and the Emtek Bar cabinet pull are both offered under the Schaub collection.

Yes. Schaub publishes a Proposition 65 warning for this pull, linked through their product stewardship page. If you are a contractor or property manager delivering into California, that warning needs to pass through on your documentation.

Schaub's Urbano collection, which the 211004 belongs to, is a contemporary profile. Within the Schaub Collection offered under the Emtek name, the Alexander series and the Art Deco series are alternate design lines, and the Emtek SELECT 8405 covers cabinet knobs and pulls in that same collection. These let you shift the look while staying within one hardware program across a unit or a floor.