Schlage Commercial 80-102 1-3/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$115.00
$66.00
Schlage Schlage Commercial 80-102 1-3/8 In. SFIC Mortise Housing, Straight Cam, Compression Ring, Spring, 1/4 In. Blocking Ring SCH-80-102

Schlage Commercial 80-102 1-3/8 In. SFIC Mortise Housing, Straight Cam, Compression Ring, Spring, 1/4 In. Blocking Ring

(No reviews yet) Write a Review

Model: 80-102 626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$115.00
$66.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage Modular Cylider Overview

One cylinder is the foundation for every lock you need, add more flexibility with less inventory dollars, and make your job easier, faster and more profitable.
Now you can service almost any lock on any door with just one cylinder. Simply by adding or changing the front and back housing you can convert a modular cylinder into multiple cylinder types, including mortise, rim and key-in-lever. The revolutionary Schlage® Modular cylinder will dramatically reduce your inventory because you will be able to make almost any cylinder type from a series of modular components and parts.
Now, one cylinder changes everything.

Our modular cylinder is the foundation for every lock you neeS

  • One cylinder converts to three differnt cylinder types by changing the tailpiece, cam or rear housing
  • Accomadates thicker doors with six available lengths of rear housing sizes
  • Front housing available in all finishes to match the locks
  • Supports interchangeability between Everest 29™, Primus®XP, and Classic key systems
  • Fewer parts required to fill orders means less inventory and lower costs
  • Never be caught on the job without the right part

One cylinder really does fit all

Thanks to the extraordinary versatility of the Schlage® modular cylinder you’ll never be caught on the job again without the right part. You’ll be able to assemble almost any Schlage cylinder on the spot, while providing your customers the same security, toughness and quality that has made Schlage one of the best names in the business.

  • Adaptable to mortise, rim and key-in-lever or key-in-knob applications
  • Available in all Schlage keyways, including Everest 29TM and Primus® XP


DOWNLOADS

Schlage Key Systems, Cylinders and Keys Catalog

Manufacturer Resources

Product Specs

Subcategory:
Parts and Accessories
Warranty:
3 Year
Product Group:
Parts and Accessories
Product Subgroup:
Cylinders
Commercial/Residential:
Commercial
Cylinder and Keyways:
SFIC Cylinder Housing With Compression Ring and Spring and 1/4" Blocking Ring
Lock Type:
Mortise
Product Type:
Cylinders
Compatibility:
Mortise Cylinders for Von Duprin and Other Straight Cam Application
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Model:
80-102
Product Function:
SFIC Mortise Housing/Shell
Door Hand Direction:
Non-Handed
Product Category:
Mechanical Locks
Product Substrate:
Stainless Steel
Department:
Door Hardware

Schlage 80-102 626 – Frequently Asked Questions

1) What exactly comes with the Schlage 80-102 SFIC mortise housing?
The 80-102 is a mortise housing (shell) for a small format interchangeable core, and it ships with the compression ring, the spring, and a 1/4 inch blocking ring, plus a straight cam. The core itself is not part of it. You supply the SFIC core in your facility's keyway, drop it into this housing, and mortise it into the lock body. Housing body is stainless steel.
2) Will a Schlage 80-102 housing work on a Von Duprin exit device?
Yes. The 80-102 is built for mortise cylinder applications on Von Duprin and other devices that need a straight cam. That is the cam profile stated for it, so if your exit device or lock calls for a straight cam mortise cylinder, this housing drives it correctly. If the device needs a cloverleaf or offset cam instead, this is the wrong part.
3) I already have BEST SFIC cores in my building. Can I use them in a Schlage 80-102 housing?
The 80-102 is a small format interchangeable core housing, so it takes a standard SFIC core, and BEST cores are the most common ones in that format. ZenSupply carries BEST cores that suit it, including the 1C Series standard 5-pin core and, where you want a patented restricted key, the 1CDF drill resistant 7-pin core. Confirm the pinning and keyway match the rest of your masterkey system before you order cores.
4) Should I use an SFIC mortise housing or a conventional keyed mortise cylinder?
Go SFIC, like the 80-102, when you want to rekey by pulling a core with a control key rather than pinning cylinders in place. That is the reason institutions, schools, and multi-family operators standardize on it: tenant turnover becomes a 10 second core swap. If you have no interchangeable core program and just need one keyed cylinder, a conventional one-piece mortise cylinder is simpler and cheaper to stock. ZenSupply carries those too, such as the Corbin Russwin 1000 Grade 1 mortise cylinder with an A02 straight cam, which is the conventional straight-cam equivalent.
5) Can I use the Schlage 80-102 on a rim exit device or a key-in-lever lock?
No. The 80-102 is the mortise configuration, threaded to mortise into the lock body with a straight cam. Rim devices need a rim cylinder with a tailpiece, and key-in-lever needs a KIL cylinder. Schlage's modular cylinder system is built so the front housing stays and you change the rear housing, cam, or tailpiece to convert between mortise, rim, and key-in-lever, so within that system you change the part, not the whole cylinder. If you need a rim housing off the shelf instead, ZenSupply carries the Corbin Russwin 3070 6-pin rim cylinder housing with a 1-7/8 inch tailpiece.
6) What is the difference between the Schlage 80-102 SFIC mortise housing and a Corbin Russwin 1000 mortise cylinder with a straight cam?
Both take a straight cam mortise application, but they are different classes of part. The Schlage 80-102 is an SFIC cylinder housing supplied with a compression ring, spring and 1/4 inch blocking ring, so it is an empty shell that accepts a small format interchangeable core keyed separately. The Corbin Russwin CR1000-112 is a complete 1000 Grade 1 series mortise cylinder in a 1-1/2 inch length with an A02 straight cam, pinned as one fixed unit. Choose the 80-102 when the facility is on an interchangeable core system and cores are swapped without pulling the lock; choose the 1000 series when a conventional pinned mortise cylinder is what the opening uses.
7) The exit device needs a rim cylinder, not a mortise cylinder. What replaces the Schlage 80-102 there?
The 80-102 is a mortise housing, so it threads into a mortise cylinder cavity and drives a straight cam for Von Duprin and other straight cam applications. A rim device with a tailpiece drive takes a rim cylinder instead, such as the Corbin Russwin 3070 6-pin rim cylinder housing with a 1-7/8 inch tailpiece. Confirm which the device uses before ordering: the mortise version turns a cam, the rim version turns a flat tailpiece through the door, and they do not interchange in the same prep.
8) Can the Schlage 80-102 be used on a Schlage L9000 mortise lock?
Not as a straight substitution for the L9000 cam. The 80-102 is supplied with a straight cam, which is what Von Duprin and other straight cam applications call for. Schlage L9000 mortise locks take a cloverleaf cam, and the Corbin Russwin CR1080-112-A01 is a 1-1/2 inch LFIC 6-pin mortise cylinder built for Schlage L9000 mortise locks with the A01 Schlage L cam. Match the cam shape to the lock body first, since the cam is what actually retracts the lock.
9) What is the 1/4 inch blocking ring on the Schlage 80-102 for?
The blocking ring is a spacer that sets how far the housing projects from the lock face. With the 1/4 inch ring included, you can take up the gap when the cylinder sits deeper than the trim, so the housing finishes flush and the cam still engages. Leave it out and the cylinder sits 1/4 inch further in. The compression ring and spring hold the assembly tight against the prep so it doesn't back out in service.
10) Do I need to worry about handing when ordering a Schlage 80-102 mortise housing?
No. The 80-102 is non-handed, so the same part works on left and right hand openings. You are ordering on cylinder length, cam type, and finish only.
11) What is a simpler alternative to the Schlage 80-102 for a facility that is not on an interchangeable core system?
An interchangeable core housing only earns its keep where cores are rotated. Where a building keys cylinders conventionally, a one-piece mortise cylinder is fewer parts to stock and order. The Detex MC65 is a 1-1/8 inch 6-pin commercial grade mortise cylinder in the Schlage C keyway, and the Corbin Russwin CR1070-114-A01 is a 1-1/4 inch 6-pin mortise housing with an A01 cloverleaf cam. The 80-102 stays the right call when the site standard is small format interchangeable core and rekeying happens by pulling cores with a control key.
12) For an aluminum storefront door with an Adams Rite MS deadlock, is the Schlage 80-102 the right cylinder?
That opening is served by parts built for the Adams Rite lock family rather than by a straight cam SFIC mortise housing. The Adams Rite 4036 is a five-pin mortise cylinder rated Grade 1 in the 4036 series, and for a narrow stile door needing an outside pull with the cylinder in it, the Adams Rite 4024 cylinder pull mounts with a trim plate and the 4025 five-pin cylinder pull mounts with through-screws, both designed for the MS1847 deadlock and deadlatch. Reserve the Schlage 80-102 for mortise preps calling for a straight cam interchangeable core housing.
13) The lock being rekeyed is a key-in-lever, not a mortise lock. Does the Schlage 80-102 fit it?
No. The 80-102 is a mortise housing, which fits the threaded mortise cylinder cavity in a mortise lock body. A key-in-lever or key-in-knob lock uses a different cylinder format entirely, such as the Falcon A23161-05 G key-in-lever cylinder in the RU/T series with a 6-pin G keyway, keyed different with two cut keys, or the Kaba Ilco 1539 key-in-knob and lever universal cylinder. Identify the lock body type before selecting the cylinder, since mortise and key-in-lever cylinders share no prep.
14) What is the difference between the Schlage 80-102 and a BEST 1CB or 1CDF interchangeable core?
The Schlage part is the housing, the BEST parts are cores. The 80-102 supplies the stainless steel mortise shell, straight cam, compression ring, spring and 1/4 inch blocking ring that make up the cylinder body. The BEST Peaks 1CB is a 150 series interchangeable core cylinder, and the BEST 1CDF is a drill resistant preferred patented interchangeable core, 7-pin brass, 150 series, both of which carry the pinning and the key control. A specifier standardizing a building decides the core line for the keying program and the housing separately for each lock prep.
15) What finishes does the Schlage 80-102 mortise housing come in?
Eleven finishes: 605 bright brass, 606 satin brass, 609 antique brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 626AM satin chrome antimicrobial, and 643E aged bronze. For a fleet of openings, 626 satin chrome is the usual commercial default; 626AM is the antimicrobial version of the same finish, which is the one healthcare and food service specs tend to call out.
16) Is the Schlage 80-102 suitable for a heavy-traffic commercial opening?
It's a commercial part, and the housing is stainless steel rather than plated pot metal, which is what you want on an entrance that gets keyed daily and lives outdoors. It is a replacement part, so it's also the right thing to order when you are refreshing cylinders across a building rather than replacing whole locks.
17) Is a BEST 12E dummy rim cylinder an acceptable stand-in for the Schlage 80-102 on an opening that does not need to be keyed?
Only if the opening is a rim application. The BEST 12E series dummy rim cylinder has a 1-5/32 inch diameter and fills a rim cylinder hole where no keyed function is wanted. The Schlage 80-102 is a mortise housing that turns a straight cam inside a mortise lock body, so the two occupy different preps. A mortise prep that needs to be filled without keying is not solved by a rim dummy.
How fast can I get the Schlage 80-102 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage 80-102 626 come with a warranty?
Absolutely. The Schlage 80-102 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage 80-102 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage 80-102 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!