Schlage Electronics 1910S-1 El...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$987.00
$735.31

Schlage Electronics 1910S-1 Electronic Horn and Strobe, 12/24VDC, Surface Mounted

(No reviews yet) Write a Review

Model: 1910S-1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$987.00
$735.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

PRODUCT OVERVIEW

Electric horns are designed for use as an immediate local audible warning device incorporated in a security system. 1910 celica horns have six combinations of volume using continuous or intermittent tone that are easy to configure.

Units are flush (partially recessed) or surface mounted using a 4 inch black box and attached using two #8-32 X 3⁄4 inch screws.

Surface and flush mounting kits are included with all horns.

FEATURES

  • Audible warning has six combinations of volume using intermittent or continuous tone with loudest tested to 102 dba
  • Strobe option adds visual warning indication
  • Intended for indoor use only
  • Flush mount to wall over a standard one-gang or two-gang electrical box
  • Surface mount using pull through wiring and the backbox kit included with the product
  • Horn shell and trim skirt in off-white

SPECIFICATIONS

  • Power Requirments: Less than 71mA @ 24VDC
  • Operating Temperature: 32°F to 120°F
  • Anechoic chamber tested @30 V 102 dba
  • UL reverberant room tested @30 V 88 dba

MODEL

  • 1910S-1: Electronic Horn with Strobe, 24VDC

DIMENSIONS

  • 4-3/4 inches W x 5-1/2 inches H

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Features:
Horn Shell and Trim Skirt in Off-White; Flush Mount to Wall Over a Standard One or Two Gang Electrical Box; Strobe Option Adds Visual Warning Indication; Latching Models Alarm Upon the Latch Release or Opening of a Connected Door
Included Components:
Units are Flush (Partially Recessed); Surface Mounted Using a 4 Black Box and Attached Using Two 8-32 X 3/4 Screws; Surface and Flush Mounting Kits
Product Type:
Electric Horns
Department:
Door Hardware

Schlage Electronics 1910S-1 – Frequently Asked Questions

1) Can the Schlage 1910S-1 horn be surface mounted, or does it need a recessed box in the wall?
Both mounting methods work. The 1910S-1 ships with surface and flush mounting kits. For surface mount, you use pull-through wiring with the included 4 inch black backbox, attached with two #8-32 x 3/4 inch screws. For flush (partially recessed) mount, it goes on the wall over a standard one-gang or two-gang electrical box. No extra mounting hardware to order either way.
2) Is the Schlage 1910S-1 horn and strobe rated for outdoor or unheated areas?
Indoor use only. Operating range is 32F to 120F, so an unheated space that drops below freezing, a loading dock, or any exterior wall location is outside what this horn is built for. Pick a weatherproof signal device for those spots.
3) How loud is the Schlage 1910S-1 and can the volume be changed after install?
There are six combinations of volume, selectable with continuous or intermittent tone, and they configure easily on the unit. The loudest setting tested at 102 dBA in an anechoic chamber and 88 dBA in a UL reverberant room at 30V. The reverberant number is the one that reflects a real corridor or stairwell better than the chamber figure.
4) What current draw should I size my access control power supply for with a 1910S-1 horn?
Less than 71mA at 24VDC. That is small enough that several of these can sit on a typical access control or alarm panel supply alongside strikes and readers, but the draw figure is published at 24VDC, so budget from that number when you total the branch.
5) Should I get the horn with the strobe or the plain horn version?
The strobe on the 1910S-1 adds a visual warning alongside the audible one. That matters in high-noise areas, spaces where occupants may not hear a tone, or anywhere you want the alarm location identified at a glance down a corridor. If the horn is in a quiet office or a back-of-house area where sound alone carries, the audible-only version of the 1910 covers it.
6) What is the 1910S-1 horn actually used for in a door alarm setup?
It is a local audible warning device wired into a security system, so it sounds at the opening rather than only at a panel. Latching models in the 1910 family alarm when a connected door's latch releases or the door opens, which is the usual propped-door or unauthorized-exit application on a stairwell or emergency exit.
7) What color is the 1910S-1 horn and will it blend with standard wall devices?
Horn shell and trim skirt are off-white, which lines up reasonably with common off-white or ivory device plates in corridors and back-of-house areas. There is no finish choice on this model.
How fast can I get the Schlage Electronics 1910S-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics 1910S-1 come with a warranty?
Absolutely. The Schlage Electronics 1910S-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics 1910S-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics 1910S-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.