You may also like
Schlage Commercial 22-645 6-Pin Deadbolt Cylinder for Schlage B500 Double Cylinder Deadbolts
Model: SCH-22-645
Schlage Modular Cylider OverviewOne cylinder is the foundation for every lock you need, add more flexibility with less inventory dollars, and make your job easier, faster and more profitable.Now you...
Schlage
Starting at
$94.00
$78.55
Schlage Commercial 22-003 6-Pin Deadbolt Cylinder for Schlage B500 Single Cylinder Deadbolts
Model: SCH-22-003
Schlage Modular Cylider OverviewOne cylinder is the foundation for every lock you need, add more flexibility with less inventory dollars, and make your job easier, faster and more profitable.Now you...
Schlage
Starting at
$94.00
$79.19
Schlage Residential B60 Greene Single Cylinder Deadbolt with Steel Strike Reinforcer
Model: SCR-B60-GEE
Schlage Residential B60 Greene Single Cylinder Deadbolt with Steel Strike ReinforcerCommercial Grade 1 Security for Residential ApplicationsThe Schlage Residential B60 Greene Single Cylinder Deadbolt...
Schlage Residential
Starting at
$103.00
$63.89
Schlage J250-028 B500 Series Deadbolt Strike Reinforcement Screws, 2", Pack of 4 Pieces
- Certified Schlage Parts
- Made With Strong Materials
- Many Parts Are Finish Specific
Manufacturer Resources
Product Specs
- Application:
- B500
- Warranty:
- Limited Lifetime Mechanical/Finish
- Product Group:
- Mechanical Locks
- Subcategory:
- Parts and Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Screw Pack
- Commercial/Residential:
- Commercial
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Package:
- Yes
- Package Qnty:
- 4
- Product Model:
- J250-028
- Product Substrate:
- Stainless Steel
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Schlage J250-028 630 – Frequently Asked Questions
1) What are the Schlage J250-028 2 inch screws actually for on a B500 deadbolt install?
They are the long reinforcement screws that go through the deadbolt strike and into the door frame stud behind the jamb. A standard short strike screw only bites the jamb trim, so a kick splits it out; a 2 inch screw reaches framing. The J250-028 is a Schlage B500 Series part and comes four to a pack, which covers a single strike.
2) Will Schlage J250-028 screws work on a residential B60 deadbolt, or are they B500 only?
These are catalogued against the B500 Series and rated commercial. The head size and finish are matched to B500 strikes, so on a different Schlage deadbolt family the screw may seat but the head appearance and countersink fit are not guaranteed to match. For a B500 strike it is the correct part.
3) Do I get a new strike plate with the Schlage J250-028, or just the screws?
Screws only, four of them. If the strike plate itself is bent or the box strike is damaged, you need a separate B500 strike; this pack replaces or upgrades the fasteners.
4) Is a 2 inch strike screw long enough to hit the framing behind a commercial jamb?
On standard wood frame construction, yes. The jamb trim plus the shim gap typically runs under an inch, so a 2 inch screw lands well into the king stud. On a hollow metal frame there is no stud to reach, and a long screw buys you nothing; use the frame's tapped strike prep instead.
5) How many doors does one pack of Schlage J250-028 strike screws cover?
One pack holds 4 screws. A deadbolt strike takes two screws, so a pack covers one opening with a spare pair, or two openings if you are only replacing the screws themselves. Property managers reinforcing a run of units should count two per deadbolt strike and order packs accordingly.
6) Are the Schlage J250-028 reinforcement screws stainless steel?
Stainless steel, yes. That matters on exterior openings and in coastal or high-humidity buildings where a plated steel screw head will rust and stain a brass or bronze strike over time.
7) What finishes do the Schlage J250-028 deadbolt strike screws come in?
Two: 609 satin brass and 612 satin bronze. Schlage parts are frequently finish specific, so match the screw head to the strike plate finish rather than the lock body. If your strike is 626 satin chrome, neither of these will match visually.
8) Are these genuine Schlage parts or an aftermarket equivalent?
Genuine Schlage, model J250-028, sold as certified Schlage parts. For a locksmith or an institutional buyer standardizing a building on Schlage B500 hardware, that keeps the strike assembly all one manufacturer.
How fast can I get the Schlage J250-028 630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage J250-028 630 come with a warranty?
Absolutely. The Schlage J250-028 630 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage J250-028 630?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage J250-028 630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.