You may also like
-
- Certified Schlage Parts
- Made With Strong Materials
- Many Parts Are Finish Specific
Manufacturer Resources
Product Specs
- Warranty:
- Limited Lifetime Mechanical/Finish
- Product Group:
- Mechanical Locks
- Subcategory:
- Parts and Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Screw Pack
- Commercial/Residential:
- Commercial
- Product Model:
- 34-004
- Product Substrate:
- Stainless Steel
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Schlage 34003 – Frequently Asked Questions
1) What is the Schlage 34-003 #3 Primus finger pin used for?
The 34-003 is a single Primus finger pin, size #3, used inside a Schlage Primus cylinder. Primus cylinders use a side bar and finger pins in addition to the standard top and bottom pin stacks, so a locksmith rebuilding or rekeying a Primus cylinder needs the specific finger pin sizes the bitting calls for. This is the #3 size, sold as a Schlage part in stainless steel.
2) Will the Schlage 34-003 pin work in a standard Schlage cylinder, or only in Primus?
Primus only. Finger pins are part of the Primus side bar system, and a conventional Schlage C keyway cylinder has no finger pin chambers to put them in. If you're pinning a standard Schlage cylinder, you want ordinary bottom and top pins, not this part.
3) Is the Schlage 34-003 finger pin a commercial locksmith part or something a homeowner installs?
This is a commercial-grade component. Fitting a Primus finger pin means opening the cylinder, disassembling the pin stacks and side bar, and reassembling to a bitting, which is bench work for a locksmith or security integrator with the Primus keying charts. A property manager replacing a lock is better served buying the complete cylinder rather than individual pins.
4) Do I need to order other Primus pin sizes along with the #3?
Usually yes. A Primus bitting specifies a finger pin size per chamber, so a cylinder rarely uses one size throughout. Order the #3 for the chambers your key bitting calls for and the other numbered finger pins for the rest. The pins are sold by number, so match the number to the chart rather than to the cylinder model.
5) Does the Schlage 34-003 Primus finger pin come in a finish, and does finish matter?
Finish isn't a consideration on a finger pin. It's an internal cylinder component made of stainless steel and never visible once the cylinder is assembled. Schlage does make many of its parts finish specific, but that applies to the visible trim and housings, not the pinning components.
6) Is the Schlage 34-003 a single pin or a pack?
It ships as a pack of pins rather than one loose pin, which is how Schlage supplies pinning components for bench stock. Everything in the pack is the same #3 finger pin size.
How fast can I get the Schlage 34003 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage 34003 come with a warranty?
Absolutely. The Schlage 34003 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage 34003?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage 34003 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.