You may also like
-
- Certified Schlage Parts
- Made With Strong Materials
- Many Parts Are Finish Specific
Manufacturer Resources
Product Specs
- Warranty:
- Limited Lifetime Mechanical/Finish
- Product Group:
- Mechanical Locks
- Subcategory:
- Parts and Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Screw Pack
- Commercial/Residential:
- Commercial
- Product Model:
- 34-004
- Product Substrate:
- Stainless Steel
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Schlage 34-004 – Frequently Asked Questions
1) What is the Schlage 34-004 finger pin used for in a Primus cylinder?
The 34-004 is the #4 finger pin for Schlage Primus cylinders. Primus keys carry a side milling in addition to the normal bitting, and the finger pins are the side-bar elements that read that milling. Pin number 4 refers to one specific depth in that set, so you order the number that matches the sidebar code you are pinning to, not a generic pin.
2) Will a Schlage 34-004 finger pin work in a standard Schlage C keyway cylinder?
No. Finger pins belong to the Primus sidebar system. A conventional Schlage cylinder has no finger pin chamber and no sidebar for them to act on, so the 34-004 has nothing to seat in. It is a service part for Primus cylinders only.
3) Is the Schlage 34-004 finger pin sold individually or as a pack?
It ships as a screw pack, meaning a bagged quantity of the #4 pin rather than a single loose pin. That suits a locksmith stocking a pinning kit by depth, since you draw the same number repeatedly across a keying job.
4) Can I substitute a different number finger pin for the Schlage 34-004?
No. Each finger pin number is a distinct depth in the Primus sidebar set, and the pinning chart calls out a specific number for each position. Dropping a different number in gives you a sidebar that will not retract, or one that retracts on the wrong key. Order the number the chart specifies.
5) What material is the Schlage 34-004 Primus finger pin made from?
Stainless steel. That matters on a pin that rides the side milling of the key every cycle, and it keeps the pin from corroding in an exterior or high-humidity opening where the cylinder sees weather.
6) Is the Schlage 34-004 Primus finger pin rated for commercial use?
It is a commercial-duty part, supplied as a genuine Schlage component for Primus cylinders in commercial openings. Buyers standardizing a facility on Primus restricted keying use these pins as the consumable side of that program.
7) Do I need to match a finish when ordering Schlage Primus pins like the 34-004?
No. Finish only matters on Schlage parts a buyer sees, such as cylinder housings, rings, and trim. The 34-004 is an internal pin, so there is one version and it works regardless of the cylinder's exterior finish.
How fast can I get the Schlage 34-004 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage 34-004 come with a warranty?
Absolutely. The Schlage 34-004 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage 34-004?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Schlage 34-004 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.