Schlage ND96EL - Vandlgard Sto...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,355.00
$853.65
Schlage Schlage ND96EL - Vandlgard Storeroom Lock, Electrically Locked (Fail Safe) - Grade 1 Cylindrical Keyed Lever Lock SCH-ND96EL-KEYED

Schlage ND96EL - Vandlgard Storeroom Lock, Electrically Locked (Fail Safe) - Grade 1 Cylindrical Keyed Lever Lock

(No reviews yet) Write a Review

Model: ND96PDEL-ATH-626
$1,355.00
$853.65
Selected Finish is
Selected Lever Type is
Selected Cylinder Type is
  • Schlage ADDER-SCHLAGE-COMMERCIAL-[KEYING]=KD - Keyed Different ADDER-SCHLAGE-COMMERCIAL-[KEYING]=KD - Keyed Different
  • Schlage ADDER-SCHLAGE-COMMERCIAL-[KEYING]=KA - Keyed Alike ADDER-SCHLAGE-COMMERCIAL-[KEYING]=KA - Keyed Alike
  • Schlage ADDER-SCHLAGE-COMMERCIAL-[KEYING]=None (Select for Less Cylinder Options) ADDER-SCHLAGE-COMMERCIAL-[KEYING]=None (Select for Less Cylinder Options)

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,355.00
$853.65
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Default Attributes
Style: Same lever, rose and finish for both sides of the door with coordinating latch and strike.
Latch: 13-247: 2-3/4" Backset-with 1-1/8" x 2-1/4" Square Corner Faceplate.
Strike: 10-025: 1-3/16" - Lip ANSI, No Box, 1-1/4" x 4-7/8".
Door thickness: 1-3/4".
Strike lip length: 1-3/16".
Keying (for P6, P and T cylinders): KD:Keyed different.
Keys (for P6, and P cylinders): Two nickel silver cut keys per lock.


ND96EL - VANDLGARD STOREROOM LOCK, ELECTRICALLY LOCKED (FAIL SAFE)

Outside lever continuously disengaged electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. Also available with Request to Exit (RX).


Schlage ND SERIES OVERVIEW

The Schlage ND Series offers a full breadth of commercial lock options with a suited combination of mechanical, electrified and electronic options. This overview covers common characteristics for the mechanical and electrified lock information.

Beyond grade 1 performance is the hallmark of the mechanical and electrified locks. ND Series locks are tested to withstand 3,100 in-lb. of abusive lever torque - more than 2 1/2 times the Grade 1 standard requirement. Offset lever pull testing up to 1,600 lbs. assures you of the lock's superb resistance against pry bar attacks. More than strong, ND Series is built to last and shows nearly zero droop or wobble after 16 million cycles.

All ND Series locks including electronic and ligature-resistant trim use the common cylindrical ANSI 161 door preparation making them easily interchangeable. They are ideal for all new construction and retrofit applications.


ND Series Mechanical Lock

The ND mechanical lock, along with being Schlage’s best selling mechanical lock, is the foundation for both the wired electrified and NDE wireless electronic lock. Not only did Schlage invent the cylindrical lock, but they continue to make it better with capabilities such as:

  • Unparalleled strength - the lock prevents access even when subjected to torque loads up to 3,100 in-lbs (2.6x BHMA1), withstands pry bar attacks of 1,600 lbs (8x BHMA requirements1), and withstands 100 hammer blows (20x BHMA requirements1, 2)
  • Exceptional durability - cycle tested to over 16M cycles (16x BHMA requirements1) with near zero droop or wobble - without the use of set screws or O-rings
  • Improved feel - improved strength and durability are more than numbers, you can actually feel it in the lock
  • Improved installation - installation is even easier than before (and withoutany set screws or O-rings)


FEATURES & BENEFITS

Security

  • Significantly exceeds ANSI/BHMA Grade 1 requirements
  • No access with minimum 3,100 in-lb. abusive lever torque, the equivalent of over 690 lbs. applied to the end of a 4-1/2" lever, 2.6 times over the BHMA requirement*
  • No access with minimum 1,600 lbs. offset lever pull for protection against pry bar attacks, 8 times over the BHMA requirement*
  • 5 points of engagement provide nearly zero droop and wobble after 16 million cycles, 16 times over the BHMA requirement*, without the use of set screws or o-rings
  • High security locking when used with Primus XP UL 437 listed cylinders

Function availability and convenience

  • 24 mechanical/4 electrified functions in the ND Series (custom functions available upon request)
  • Multiple key systems available: open, patented and restricted
  • Four electrified functions auto-detect 12/24V DC operation and, with maximum current draws of 0.4 amps and 0.1 amps holding current eliminate heated levers
  • Indicator roses for classroom applications
  • Three spring cage sets support all Schlage plus eight competitive cylinder formats

Aesthetics

  • Nine lever and four rose designs
  • Ten available finishes
  • Perfectly suited to Schlage ALX Series grade 2 locks
  • Suites with Von Duprin exit devices and other Schlage products

Options

  • Vandlgard™ models have a lever that freely rotates up and down when locked to protect the chassis from excessive force on the lever to prevent vandlism.

*Beyond Grade 1 performance for ND Series locks with Schlage cylinders only (Conventional, FSIC & SFIC). Performance with non-Schlage cylinders will exceed BHMA grade 1 requirements, but the product performance may be less than that of Schlage cylinders.


AVAILABLE ND SERIES FUNCTIONS

Other ND Series models can be found in the ND Series section and in-depth function description are available in the ND Series catalog linked below, or in the image carousel above.

Non-keyed functions

  • ND10 ANSI F75 Passage Lock
  • ND12 ANSI F89 Exit Lock (mechanical and electrified)
  • ND40 ANSI F76 Privacy Lock
  • Plus four additional functions

Keyed functions

  • ND50 ANSI F82 Entrance/Office Lock
  • ND53 ANSI F109 Entrance Lock
  • ND70 ANSI F84 Classroom Lock
  • ND80 ANSI F86 Storeroom Lock (mechanical and electrified)
  • Plus six additional functions

Special functions

  • ND30 ANSI F77 Patio Lock
  • ND72 ANSI F80 Communicating Lock
  • Plus five additional functions


CERTIFICATIONS & TESTING

To see all specifications and certifications, review the ND Series catalog in the links below.

Certifications

  • Tested and certified under ANSI/BHMA A156.2 Series 4000, Grade 1
  • UL/cUL listed: All locks 3-hour, A label fire door 4' x 10' single door and 8' x8' pair doors; 90-minute 8' x 10' pair doors with 3/4" latch option
  • Meets ADA requirements
  • Meets BAA (Buy American Act)
  • ANSI/BHMA Certifications: All ND Series comply with A156.2 performance requirements for grade 1 cylindrical locks. Wired electrified complies with A156.25 (indoor), wireless electronic complies with A156.25 (indoor/outdoor) requirements for electrified locking devices.
  • ICC Certifications: Complies with ICC A117.1 Accessible and Usable Buildings and Facilities.
  • UL/cUL Certifications: All locks 3 hour A label single firedoor 4'0" x 10'0"; pair doors 3 hour firedoor 8'0" x 8'0" with 3⁄4" latch option; pair doors 90 minute fire 8'0" x 10'0" with 3⁄4" latch option.
  • CA Fire Code Certifications: All levers with a return to door of 1⁄2" (64 mm) or less comply (Rhodes, Sparta, Tubular, Omega, Longitude, Boardwalk).
  • FL Building Code Certifications: Complies with Florida Building Code (ASTM E330, E1886, E1996) and Miami Dade (TAS 201, 202, 203) requirements for hurricanes.
  • Federal Certifications: Meets FF-H-106C Series 161.
  • Other Certifications: UL294, CSA C22.2 No. 205-M1983, FCC Part 15, IC RSS-210, RoHS.

Testing

  • ANSI Cycles Tested: 3 million cycles (3x ANSI grade requirement).
  • Abusive locked lever torque: Minimum 3,100 inch-pounds without gaining access.
  • Offset lever pull: Mminimum 1,600 foot pounds without gaining access.
  • Vertical lever impact: Minimum 100 impacts without gaining access.
  • Cycle life: Minimum 16 million cycles; 1) with no visible lever sag; 2) without the use of performance aids (i.e. set screws, spacers, etc.).


DOWNLOADS & RESOURCES



Technical resources


Manufacturer Resources

Product Specs

Series:
ND Series
Grade:
Grade 1
Duty Level:
Heavy Duty
Handle Type:
Lever
Keyed Function:
Single Cylinder
Keys Included:
2
Warranty:
10 Year
Standard Latch:
13-247: Deadlatch - 2-3/4" Backset - Square corner, 1-1/8" x 2-1/4"
Standard Strike:
10-025: ANSI, no box, 1-1/4" x 4-7/8" (1-3/16" Lip length)
Subcategory:
Cylindrical Lever Locks
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Keyed:
Yes
Features:
Schlage Vandlgard Trim
Electronic:
Yes
Commercial/Residential:
Commercial
Cylinder and Keyways:
S123
Function Description:
Outside lever continuously disengaged electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress.
Lock Type:
Cylindrical
Lock Function:
Storeroom
Fail-safe / Fail-secure:
Fail-Safe
Product Attribute:
Cylindrical Locks
Product Model:
ND96EL
Product Function:
Storeroom
Door Hand Direction:
Non-Handed
Product Category:
Mechanical Locks
Product Substrate:
Zinc and Steel
Department:
Door Hardware

Schlage ND96PDEL-ATH-626 – Frequently Asked Questions

1) What happens to a Schlage ND96EL lock when the power goes out?
Power loss unlocks it. The ND96EL is the fail-safe version of the ND Series electrified storeroom lock: the outside lever is held disengaged by power, and cutting power (or throwing the switch) frees the outside lever so anyone can get in. That is the opposite of a fail-secure lock, which stays locked when power drops. Use fail-safe where a room has to be reachable in an emergency, or where a stairwell or corridor door has to release on fire alarm. If you need the door to stay locked from outside during an outage, you want the fail-secure ND Series electrified storeroom lock instead, not this one. Either way the inside lever is always free for immediate egress, so life safety out of the room does not depend on the power.
2) Will the Schlage ND96EL fit my existing cylindrical lock prep?
Yes, if the door carries the standard ANSI 161 cylindrical prep. Every ND Series lock, including the electrified and ligature-resistant trims, uses that common preparation, so they drop into new construction and retrofit openings alike. The lock ships for a 1-3/4 inch door with the 13-247 deadlatch on a 2-3/4 inch backset and a 1-1/8 x 2-1/4 inch square corner faceplate. Check the backset on your existing latch first: if the door is bored at 2-3/8 inches, the standard 2-3/4 inch latch will not reach.
3) Do I need to specify handing when ordering a Schlage ND96EL lever lock?
No. The ND96EL is non-handed, so one lock covers a left or right hand door and you do not have to figure out the swing before you order. What you do have to specify is the lever design and finish, the cylinder option, and the keying.
4) Is the Schlage ND96EL ANSI Grade 1 and can it go on a fire rated door?
Grade 1, tested and certified under ANSI/BHMA A156.2 Series 4000. The wired electrified locks additionally comply with A156.25 for indoor electrified locking devices. On fire doors it is UL/cUL listed: 3 hour A label on a single door up to 4'0" x 10'0", 3 hour on pair doors 8'0" x 8'0" with the 3/4 inch latch option, and 90 minute on pair doors 8'0" x 10'0" with the 3/4 inch latch option. Note the pair door ratings depend on ordering the 3/4 inch latch, not the standard latch. It also meets ADA requirements and complies with ICC A117.1, and meets the Buy American Act, which matters on federal and public work.
5) What voltage does the electrified Schlage ND96EL run on and how much current does it draw?
The ND Series electrified functions auto-detect 12 or 24V DC, so you do not order a voltage, the lock sorts itself out on whatever the power supply delivers. Maximum draw is 0.4 amps with 0.1 amps holding current, which is low enough that the levers do not heat up, a real complaint on older electrified trim. Size your supply and figure your wire run off the 0.4 amp inrush.
6) What cylinder and keyway does the Schlage ND96EL take, and can I key it into my existing system?
Standard is the P conventional 6-pin cylinder in the Schlage C keyway, shipping keyed different with two nickel silver cut keys per lock. If you are building or matching a masterkey system, order it less cylinder (L) or less FSIC core (J) and supply your own, or specify keyed alike (KA) when several openings need to share one key. Three spring cage sets in the ND chassis accept all Schlage cylinder formats plus eight competitive formats, so an existing non-Schlage keyway can often be carried over. Primus XP UL 437 listed cylinders are the option where you need patented key control and high security.
7) What is the closest equivalent to a Schlage ND96EL from another manufacturer for an electrified fail safe cylindrical lever opening?
The Corbin Russwin CL33903 is the nearest peer. Both are Grade 1 electrified fail safe cylindrical lever locks. The CL33903 is offered in a 12VAC/DC version and covers doors 1-3/4 inch to 2 inch thick, while the ND96EL is built for 1-3/4 inch doors with a 13-247 deadlatch on a 2-3/4 inch backset and a 10-025 ANSI strike. Both keep the inside lever free at all times in the fail safe arrangement, so egress is unaffected by power state. The ND96EL adds Vandlgard trim, where the outside lever rotates freely when locked to protect the chassis.
8) If the door does not need to be electrified, what mechanical storeroom lever takes the place of a Schlage ND96EL?
For a storeroom opening with no power at the door, the Hager 2580 with Withnell lever is a Grade 2 cylindrical storeroom lock covering doors 1-3/8 inch to 2 inch thick, and the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors. Both hold the outside lever locked mechanically at all times and release by key only. The ND96EL performs the same storeroom function but the outside lever is controlled electrically and unlocks on power failure as well as by key.
9) Which lever locks match a Schlage ND96EL when the existing building keying is Schlage C keyway?
The ND96EL uses the S123 cylinder and keyway family, and the conventional cylinder option is a 6-pin Schlage C keyway supplied with two keys. Peers built for the same keyway include the Cal-Royal AG00 entrance lever with a 6-pin Schlage C keyway keyed different on a 2-3/8 inch backset, the Cal-Royal AG03 classroom lever with the same 6-pin Schlage C keyway on a 2-3/4 inch backset, and the Arrow MK33-BD-CS asylum lock with a conventional Schlage C keyway cylinder. Those can be brought onto the same key system as the ND96EL openings.
10) What does the Vandlgard feature on the Schlage ND96EL actually do?
The Vandlgard lever spins freely up and down when the lock is secured, so anyone hanging on it or kicking it down is turning air rather than loading the chassis. That is the point of it on abuse-prone openings: a locked lever that does not fight back does not get twisted off. Underneath, the ND chassis is tested to 3,100 in-lb of abusive lever torque without granting access, and to 1,600 lbs of offset lever pull against pry bar attack. Schools, dorms, transit and public restroom corridors are where this trim earns its keep.
11) Can I get a Schlage ND96EL with request to exit monitoring?
Yes, the ND96EL is also available with Request to Exit (RX), which reports inside lever movement back to the access control panel so the system knows a legitimate egress happened rather than a forced door. If you are tying this opening into an access control head end with door position monitoring, specify RX at the time of order, it is not something added in the field.
12) How does a storeroom function lock behave day to day compared to an office or classroom lock?
Storeroom means the outside lever is always locked and there is no way to leave it unlocked. Key entry from outside retracts the latch for that one entry only, then it relocks behind you, and the auxiliary latch deadlocks the latchbolt when the door is closed so it cannot be carded. On the ND96EL that mechanical behavior is layered under the electric release. If you want staff to be able to leave the door unlocked during business hours, storeroom is the wrong function, that is the ND50 entrance/office lock (ANSI F82). If you want it lockable from inside the room for a lockdown, that is the classroom security family, not this.
13) What other electrified fail safe cylindrical lever locks are there besides the Schlage ND96EL?
The closest cross-brand equivalent is the Corbin Russwin CL33903, a Grade 1 fail safe electrified cylindrical lever lock listed for 1-3/4 inch to 2 inch doors and offered in a 12V AC/DC version. The practical difference for a spec is door thickness: the CL33903 covers up to 2 inches, while the ND96EL ships set up for 1-3/4 inch doors. Where the ND96EL pulls ahead is trim, with nine lever designs and ten finishes, and the Vandlgard free-spinning lever for abuse openings. If your building is already standardized on Schlage keying, staying in the ND Series also keeps the cylinder work simple.
14) I only need a mechanical storeroom lever, no wiring. What should I buy instead of the ND96EL?
Skip the electrified lock entirely if there is no access control at the opening. Within the ND Series the mechanical storeroom function is the ND80 (ANSI F86), same chassis, same ANSI 161 prep, no power required. If Grade 2 is acceptable for the traffic, the Hager 2580 storeroom lock with the Withnell lever covers 1-3/8 to 2 inch doors, and the Cal-Royal AG05 storeroom lever with a deadlocking latchbolt covers 1-3/8 to 1-3/4 inch. Running conduit and a power supply to a storeroom door that nobody will ever release remotely is money spent for nothing.
15) Which lever styles and finishes can I get on the Schlage ND96EL, and will they match the rest of my building?
Nine lever designs are offered: Athens, Boardwalk, Broadway, Latitude, Longitude, Omega, Rhodes, Sparta and Tubular. Ten finishes: 605 bright brass, 606 satin brass, 612 satin bronze, 613 oil rubbed bronze, 619 satin nickel, 622 matte black, 625 bright chrome, 626 satin chrome, 626AM satin chrome antimicrobial, and 643E aged bronze. Both sides of the door get the same lever, rose and finish as standard. For fleet consistency, ND Series suites with Von Duprin exit devices and other Schlage products, and pairs with Schlage ALX Series Grade 2 locks where a lighter duty opening does not justify Grade 1, so a corridor door and a closet door can still look identical. If your project is under the California fire code, note that only levers with a 1/2 inch or shorter return to door comply: Rhodes, Sparta, Tubular, Omega, Longitude and Boardwalk.
16) Which electrified cylindrical lever should be used when the door must stay locked during a power failure instead of unlocking?
The ND96EL is a fail safe device: the outside lever is continuously disengaged electrically and unlocks on power failure. Of the electrified cylindrical levers in the same class, the Corbin Russwin CL33903 in its 12AC/DC NZ lever, D rose form is also a Grade 1 fail safe lever for 1-3/4 inch to 2 inch doors, so it behaves the same way on loss of power. A fail secure arrangement is a different order code within an electrified series rather than a different chassis, so specify the fail secure model of whichever series the opening standardizes on.
17) Is a Grade 1 vandal resistant passage lever like the Corbin Russwin CL3110 a substitute for a Schlage ND96EL?
No. The CL3110 is a Grade 1 vandal resistant cylindrical lever in passage/closet function for 1-3/4 inch to 2 inch doors, which means both levers are always free and there is no cylinder and no access control. The ND96EL is a keyed storeroom lock with a single cylinder and two keys supplied, and its outside lever is controlled electrically. The two share the vandal resistant lever idea, since the ND96EL uses Vandlgard trim, but only the ND96EL secures the opening.
18) Can a standalone keypad lever such as the Delaney LP250 replace an electrified storeroom lock like the Schlage ND96EL?
They solve different problems. The Delaney LP250 is a Grade 2 electronic keypad leverlock and the Lockey 1150 is a mechanical keypad lever set with double combination for doors 1-1/8 inch to 2 inch thick; both run credentials at the door with no wiring back to a panel. The ND96EL is a Grade 1 electrified lock whose outside lever is released by a switch or by loss of power, so it is the choice when the opening is tied to an access control system or a fire alarm release. Keypad levers cannot be released remotely that way.
19) What Grade 1 lever should be used on the non-secured doors in a building where the secured doors get a Schlage ND96EL?
To keep one grade across a corridor, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock with non-handed levers and a fire rating for doors 1-3/8 inch to 2-1/4 inch, and the Falcon T101 is a Grade 1 heavy duty passage lever with pressure release technology. The Design Hardware X75 is a Grade 1 passage lever for 1-3/4 inch doors. All three are non-keyed passage function, matching the traffic duty of the ND96EL, which is Grade 1 heavy duty and also non-handed, while the ND96EL carries the cylinder for the openings that need to be locked.
20) What is the difference between a Schlage ND96EL and a Dexter C1000 Entry/Office lever for a supply room door?
The Dexter C1000 Entry/Office is a Grade 1 clutching keyed cylindrical lever for doors 1-3/8 inch to 1-3/4 inch, and its entry/office function lets an occupant leave the outside lever unlocked from inside. The ND96EL is a storeroom function lock: the outside lever stays locked and there is no way to leave it in an unlocked state at the door, since release comes from a key, a switch, or loss of power. For a supply room that must never be left open by mistake, that is the deciding difference.
21) For a classroom door, is a Schlage ND96EL the right lock or should a classroom function lever be used?
For a teaching space, a classroom function is usually specified instead. The Dexter C1000 Classroom is a Grade 1 clutching keyed cylindrical lever for 1-3/8 inch to 1-3/4 inch doors, and the Dexter C1000 Classroom Security version adds an inside cylinder so the door can be locked down from within the room. The ND96EL is a storeroom lock, so the outside lever is always secure and the room cannot be locked or unlocked from the inside at all. The ND96EL fits storage, mechanical, and IT rooms tied to access control rather than classrooms.
22) Is a Grade 2 or Grade 3 lever an acceptable stand-in for a Schlage ND96EL on a high traffic commercial door?
They sit in a different performance class. The ND96EL is a Grade 1 commercial heavy duty lock in zinc and steel. Grade 2 levers such as the Hager 2525 commercial entry lock for 1-3/8 inch to 2 inch doors and the Falcon B511CP6D medium duty entry/office lever, and Grade 3 levers such as the Cal-Royal AUS00 entrance/office lever for 1-3/8 inch to 1-3/4 inch doors, are certified to lower cycle and strength requirements. Where a specification calls out ANSI/BHMA Grade 1, only a Grade 1 chassis such as the ND96EL will satisfy it.
23) What lock suits a restroom or utility door that a Schlage ND96EL is not right for?
A restroom or patient-area door needs a function the storeroom ND96EL does not offer. The Arrow MK02-TA is a non-keyed privacy lock with a tudor knob and a fire rating, and the Hager 2540 with Withnell lever covers 1-3/8 inch to 2 inch doors in that same bed and bath class. For a utility or institutional door, the Arrow MK33-BD-CS is a heavy duty asylum lock and the Dexter C1000 Asylum is a Grade 1 asylum function lock for 1-3/8 inch to 2 inch doors, both keyed on both sides. The ND96EL keeps the inside lever free at all times, so it cannot restrict egress the way an asylum function does.
24) Can Yale or Accentra hardware be brought onto the same key system as a Schlage ND96EL?
The Accentra 107S is a Schlage cylinder adapter kit for Yale hardware, which is the piece that lets Yale-prepped chassis accept a Schlage format cylinder. That matters when part of a facility runs on the S123 cylinder and keyway used by the ND96EL and the rest carries Yale trim, since the goal is one key across both. The ND96EL itself ships in a conventional 6-pin Schlage C cylinder, less cylinder, or less FSIC cylinder form, so no adapter is needed on the Schlage side.
25) How durable is the Schlage ND Series lever, will it droop after a few years of heavy traffic?
Lever sag is what kills most cylindrical locks on a busy opening, and the ND chassis is built around five points of engagement rather than set screws or O-rings that eventually give. Cycle life is a minimum of 16 million cycles with no visible lever sag and without performance aids, and ANSI cycle testing was run at 3 million cycles, three times the grade requirement. The chassis also takes a minimum of 100 vertical lever impacts without access. Body is zinc and steel, rated heavy duty commercial. On a high-traffic entry or a school corridor that is the difference between one lock and three service calls.
26) Is the Schlage ND96EL approved for hurricane zone and Florida building code work?
Yes. The ND Series complies with the Florida Building Code under ASTM E330, E1886 and E1996, and with Miami Dade TAS 201, 202 and 203 for hurricane requirements. It also meets the federal FF-H-106C Series 161 specification, which comes up on government projects. On the electrified side it carries UL294, CSA C22.2 No. 205-M1983, FCC Part 15, IC RSS-210 and RoHS.
27) Is there an antimicrobial finish option for a healthcare or food service door?
626AM satin chrome antimicrobial is one of the ten finishes offered on the ND Series lever locks, alongside the standard 626 satin chrome. For patient room corridors, clinics and commercial kitchens that is the one to specify, and it is a finish choice, not a different lock, so the function, prep and lever designs are unchanged.
28) Can a dummy lever be used on the inactive leaf of a pair where the active leaf has a Schlage ND96EL?
Yes, and it should be matched on grade. The BEST 9K Series 1DT is a Grade 1 heavy duty non-keyed single dummy trim cylindrical lever, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever from the 5400 Series. Either gives a pull on the inactive leaf at the same Grade 1 heavy duty level as the ND96EL on the active leaf. A dummy has no latch and no chassis, so it cannot secure or electrify an opening on its own.
How fast can I get the Schlage ND96PDEL-ATH-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage ND96PDEL-ATH-626 come with a warranty?
Absolutely. The Schlage ND96PDEL-ATH-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage ND96PDEL-ATH-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage ND96PDEL-ATH-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!