You may also like
Screw 10-32 x 1-1/4 Oval Head Philli (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JOH1 – Frequently Asked Questions
1) Will a 10-32 screw thread into a 8-32 tapped hole on my junction box?
No. The JOH1 is cut 10-32 and will not start in an 8-32 tapped hole, and forcing it strips the thread in the box ear or strap. Wiring devices and plaster rings are normally tapped 10-32 while some cover plates and smaller hardware use 6-32 or 8-32, so match the tap before you drive it.
2) How many Metallics JOH1 screws come in a jar?
One hundred screws per jar. The JOH1 is packaged in a jar rather than a loose bag, which keeps the 1-1/4 inch 10-32s sorted on a service truck or at a parts bench.
3) Is an oval head screw the right choice, or should I use a flat head or a round head?
An oval head seats partly into a countersunk hole and leaves a low, rounded crown above the surface. Use it where a countersink exists but you want a finished look rather than a fully flush face, such as a cover plate or wall plate. If the hole is countersunk and the head must sit dead flush, use a flat head; if the surface is flat and uncountersunk, a round or pan head bears better on the material. The JOH1 is the oval head version in 10-32 x 1-1/4.
4) Is 1-1/4 inches long enough for mounting a device in a deep box or through a plaster ring?
At 1-1/4 inches the JOH1 gives roughly a half inch more reach than the 3/4 inch screws that normally ship with a receptacle or switch, which is what you need when a device sits back behind a plaster ring, a thick tile surround, or stacked mud rings. If the device yoke still will not reach the tapped ear, step up to a longer 10-32 rather than stacking washers.
5) What is the exact part number to order the Metallics 10-32 x 1-1/4 oval head Phillips screw?
Order Metallics part number JOH1. That is the manufacturer part number for the 10-32 x 1-1/4 oval head Phillips screw supplied in a 100 count jar.
How fast can I get the Metallics JOH1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JOH1 come with a warranty?
Absolutely. The Metallics JOH1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JOH1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JOH1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.