You may also like
Screw 8-18 x 1-1/4 Oval Head Phillip (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JOMSP01 – Frequently Asked Questions
1) Is an oval head Phillips screw the right choice, or should I use a flat head?
An oval head like the JOMSP01 seats partway into a countersunk hole and leaves a low rounded crown above the surface, so it works where you want a finished look but the hole is not deep enough, or the material too thin, to bury the head completely. Use a true flat head only where the top must sit dead flush with the surface. For cover plates and trim where the head is meant to show slightly, the oval is the usual pick.
2) Will the Metallics JOMSP01 work for mounting electrical cover plates and device trim?
That's what the 8-18 x 1-1/4 oval head Phillips is sold for. Metallics lists it as an electrical fastener, and the 1-1/4 inch length gives enough thread to pull trim or a plate tight to a box or stud while the oval head finishes the hole. For deeper standoffs you'd want a longer screw; for thin metal only, a shorter one.
3) What driver bit do I need for the Metallics JOMSP01 screws?
A Phillips bit. On a #8 head that's a #2 Phillips, which is the standard bit for #6 through #10 screws, so a single driver covers these alongside most other device and plate screws in the bag.
4) What is the Metallics part number for the 8-18 x 1-1/4 oval head Phillips screw in a 100-count jar?
JOMSP01 is the Metallics number, and it is the number to order or cross-reference by.
How fast can I get the Metallics JOMSP01 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JOMSP01 come with a warranty?
Absolutely. The Metallics JOMSP01 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JOMSP01?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JOMSP01 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.