You may also like
Screw 10-32 x 1/2 SKT S-Scr Cup 18-8 (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JSS3212SS – Frequently Asked Questions
1) What size and thread is the Metallics JSS3212SS socket set screw?
The JSS3212SS is a 10-32 x 1/2 inch socket set screw. 10-32 is a machine screw thread, so it threads into a tapped 10-32 hole, not into wood or sheet metal. Length is 1/2 inch.
2) Is the JSS3212SS set screw stainless, and will it hold up outdoors or in a damp vault?
It is 18-8 stainless steel, the standard 300 series austenitic grade used for corrosion resistance in wet and outdoor locations. That makes it a reasonable choice for damp electrical vaults, exterior enclosures, and washdown areas where a plain steel set screw would rust.
3) What does the cup point on this 10-32 socket set screw do, and when should I pick a different point?
The JSS3212SS has a cup point: the tip is hollow-ground with a sharp rim that bites into the mating part and resists backing out under vibration. That is what you want for locking a collar, pulley, or lug onto a shaft where a small permanent mark is acceptable. If you cannot mar the shaft, or you need the screw to seat in a drilled spot or against a shoulder, look for a flat, oval, or cone point instead.
4) What tool drives the JSS3212SS set screw?
It is a socket (hex key) drive set screw, so it is driven with an Allen wrench, not a screwdriver. The head is headless and seats flush or below the surface of the part it clamps.
5) How many screws come in a jar of Metallics JSS3212SS?
Each jar holds 100 of the 10-32 x 1/2 inch stainless set screws. The jar pack is the ordering unit, which suits a service van or a shop bench where you are pulling a few at a time rather than consuming a full box on one job.
6) Is the JSS3212SS available in other lengths or just 1/2 inch?
Model JSS3212SS is the 10-32 x 1/2 inch cup point socket set screw in 18-8 stainless, supplied as a 100 count jar. If your application needs more thread engagement into a shaft or collar, you need a different length 10-32 socket set screw, not this part number.
How fast can I get the Metallics JSS3212SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSS3212SS come with a warranty?
Absolutely. The Metallics JSS3212SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSS3212SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSS3212SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.